<
>
Specifications
Current - Saturation (Isat):
13.5A
Mfr. Part #:
PSPMAA0603-3R3M-ANF
Package:
SMD,7.1x6.6mm
Key Attributes
Model Number:
PSPMAA0603-3R3M-ANF
Product Description
Product Overview
The PSPMAA0603-3R3M-ANF is an SMD Inductor designed for various electronic applications. It is manufactured by PROD TECHNOLOGY CO., LTD. and E-LIVEN TECHNOLOGY CO., LTD.
Product Attributes
- Brand: PROD TECHNOLOGY CO., LTD. / E-LIVEN TECHNOLOGY CO., LTD.
- Origin: Taiwan
Technical Specifications
| ITEM | P/N | PRODUCT | TEST FREQUENCY | TEST INSTRUMENT | Lo (H) | TOLERANCE | DCR m @ 25 MAX | Typical Heat Rating DC Current (A) (Idc) | Typical Saturation DC Current (A) (Isat) | Dimensions (mm) A | Dimensions (mm) B | Dimensions (mm) C | Dimensions (mm) D | Dimensions (mm) E | Dimensions (mm) F | Dimensions (mm) G | Dimensions (mm) H |
| PSPMAA0603-3R3M-ANF | SMD Inductor | 100 kHz / 1.0V | Zentech-3305 / Zentech502BC | 3.3 | 20% | 30 | 28 | 13.5 | 6.6 0.3 | 7.1 0.3 | 3.0 MAX | 3.0 0.3 | 1.6 0.5 | 7.4 Typ | 3.7 Typ | 3.5 Typ |
Operating Conditions and Notes
- Ambient Temperature: 26
- All test Data is referenced to 25 ambient.
- Typical Heat Rating DC Current would cause an approximately T of 40.
- Typical Saturation DC Current would cause Lo to drop approximately 30%.
- Operation Temperature Range: -55 ~ 125.
- The Part temperature (ambient + T) should not exceed 125 under worst case operating conditions.
- Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application.
Mechanical Reliability Test
| TEST | SPECIFICATION & REQUIREMENT | METHOD USED |
| Solderability | The surface of terminal/pin tested shall be covered with new solder by 95% | Solder heat proof: Preheating: 180 10 90 seconds, Soldering: 255 5 for 3 1 sec |
| Shock | Inductance change within 5% Without mechanical damage | Without Drop down with 981m/s2 (100G) shock Attitude upon a rubber block method shock testing machinem, 3 tests. |
| Vibration | Inductance change within 5% Without mechanical damage | Vibration frequency: 10Hz to 55Hz to 10Hz 60 seconds cycle, Vibration time: 2 hours |
Endurance Reliability Test
| TEST | SPECIFICATION & REQUIREMENT | METHOD USED |
| Thermal Shock | Inductance change within 5% Without mechanical damage | -25, (30 mins) -> room temp. (5 mins) -> 125, (30 mins) -> room temp. (5 mins) 100 cycles |
| Heat Resistance | Inductance change within 5% Without mechanical damage | Apply IDC current @ 85 ambient Duration: 1000 hrs |
| Humidity Resistance | Inductance change within 5% Without mechanical damage | Apply IDC current @ 60 ambient Humidity: 90~95 Duration: 1000 hrs |
| Low Temp. Storing | Inductance change within 5% Without mechanical damage | Storing Temp. -25 2 for total 1,000 +4/-0 hours |
| High Temp. Storing | Inductance change within 5% Without mechanical damage | Storing Temp. 125 2 for total 1,000 +4/-0 hours |
Carrier Taping & Reel
| ITEM | UNIT : (mm) | A | B | Ao | Bo | Ko | W | P |
| CARRIER TAPEING REEL & CARRIER MATERIALS (PAPER PLASTICS) | 1000 | 17 | 6.9 0.1 | 7.6 0.1 | 3.4 0.1 | 16 | 12 |
Typical Pulling Force: 10 grams
2410121516_PROD-Tech-PSPMAA0603-3R3M-ANF_C436546.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
