Product Overview
The PSWSAA5942 series is a SMD Shielded Wound Inductor designed for general electronic equipment. It offers reliable performance in various applications, including AV equipment, telecommunications, home appliances, and industrial robots. Please consult the manufacturer for use in high-reliability or critical applications.
Product Attributes
- Brand: PuLuoDe Electronic Technology (Shenzhen) Co. LTD
- Origin: Shenzhen, China
- Product Series: SMD Shielded Wound Inductor
- Product Code: PSWSAA5942 series
Technical Specifications
| Product Code | Inductance (H) | Tolerance | Q (Min) @ 100KHz | DCR ( Max) @ 25 | Rated Current (mA Max) @ T40 | S.R.F (MHz Min) | Rated Voltage (V) | Dimensions (mm) (L x W x H) | Land Pattern (a x b x c) |
| PSWSAA5942-2R2M | 2.2 | 20% | 35 | 0.10 | 1750 | 170 | 80 | 5.90Max x 5.00Max x 4.2Max | 1.14 Typ x 3.05 Typ x 3.0Typ |
| PSWSAA5942-4R7M | 4.7 | 20% | 35 | 0.11 | 1150 | 140 | 80 | 5.90Max x 5.00Max x 4.2Max | 1.14 Typ x 3.05 Typ x 3.0Typ |
| PSWSAA5942-100M | 10 | 20% | 35 | 0.17 | 750 | 70 | 80 | 5.90Max x 5.00Max x 4.2Max | 1.14 Typ x 3.05 Typ x 3.0Typ |
| PSWSAA5942-331M | 330 | 20% | 18 | 5.40 | 150 | 6 | 80 | 5.90Max x 5.00Max x 4.2Max | 1.14 Typ x 3.05 Typ x 3.0Typ |
| PSWSAA5942-471M | 470 | 20% | 16 | 6.80 | 120 | 4 | 80 | 5.90Max x 5.00Max x 4.2Max | 1.14 Typ x 3.05 Typ x 3.0Typ |
| PSWSAA5942-561M | 560 | 20% | 40 | 6.10 | 110 | 3 | 80 | 5.90Max x 5.00Max x 4.2Max | 1.14 Typ x 3.05 Typ x 3.0Typ |
Reliability Testing
| Test Item | Specification & Requirement | Method Used |
| Solderability | The surface of terminal/pin tested shall be covered with new solder by 95% | Solder heat proof: Preheating: 180 10 90 seconds; Soldering: 255 5 for 3 1 sec |
| Thermal Shock | Inductance change within 5%; Without mechanical damage | -40, (30 mins) -> room temp. (5 mins) -> 125, (30 mins) -> room temp. (5 mins) 100 cycles |
| Heat Resistance | Inductance change within 5%; Without mechanical damage | Apply IDC current @ 85 ambient; Duration: 1000 hrs |
| Humidity Resistance | Inductance change within 5%; Without mechanical damage | Apply IDC current @ 60 ambient; Humidity: 90~95; Duration: 1000 hrs |
| Low Temp. Storing | Inductance change within 5%; Without mechanical damage | Storing Temp. -40 2 for total 1,000 +4/-0 hours |
| High Temp. Storing | Inductance change within 5%; Without mechanical damage | Storing Temp. 125 2 for total 1,000 +4/-0 hours |
Packing Information
| Series | Reel Diameter (R) (mm) | Reel Width (W) (mm) | Tape Width (mm) | Pitch (P) (mm) | Component Height (H) (mm) | MPQ (pcs/Reel) |
| 5942 | 178 | 12.5 | 8 | 6.0 Typ | 5.4 Typ | 1500 |
Tape Peeling off force: 20g~120g
Package Quantity: 1500pcs/Reel, 21000pcs/Full Container Load
Notes
Operating Temperature Range: -40 C to +125 C
Storage Life: 12 months (Storage Conditions: TEMP.5~40; RH10%~75%)
Soldering Preheating: Temperature difference between preheating and soldering temperature should not exceed 150C.
Static Electricity Protection: Essential to prevent permanent damage.
Environmental Considerations: Avoid extreme environments (high salt, strong acid, strong alkali, strong radiation). Do not use or store in locations with gas corrosion.
Product Handling: Avoid contact with cleaning agents and alcohol. Ensure no residual stress is applied to the chip after soldering due to board distortion. Do not touch any part of the product during operation to prevent electric shock.
Application Scope: Intended for general electronic equipment. For high-reliability or critical applications, please contact the manufacturer for written consent. Special applications include, but are not limited to: , Transportation, Aerospace, Power-generation control, Atomic energy, Explosive ignition control, Transportation control, and equipment related to national defense.
2504101957_PROD-Tech-PSWSAA5942-100M_C46628483.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
