<
>
Specifications
Current - Saturation (Isat):
43A
Mfr. Part #:
PSTMAA5030-R15MG
Package:
SMD,5.2x5mm
Key Attributes
Model Number:
PSTMAA5030-R15MG
Product Description
Product Overview
The PSTMAA5030-Series is a range of SMD T-CORE Molding power inductors featuring a flat wire structure for ultra-low DC resistance and high rated current. Its integrated structure eliminates inductor noise, while the closed magnetic circuit design minimizes electromagnetic interference (EMI). The compact and ultra-thin form factor conserves PCB space.
Product Attributes
- Brand: (PuLuoDe Electronic Technology (Shenzhen) Co., LTD)
- Origin: Shenzhen, China
- Certifications: Not specified
- Color: Not specified
Technical Specifications
| Product Code | Inductance (H) | Tolerance | DCR (m) Typ | Rated Current (IRMS) Typ (A) | Saturation Current (ISAT) Typ (A) | Dimension (mm) | Test Frequency |
| PSTMAA5030-R15MG | 0.15 | 20% | 1.05 | 1.42 | 25 | 5.2x5.0x3.0 | 1MHz / 1V |
| PSTMAA5030-R33MG | 0.33 | 20% | 1.6 | 1.95 | 21 | 5.2x5.0x3.0 | 1MHz / 1V |
| PSTMAA5030-R47MG | 0.47 | 20% | 2.5 | 2.95 | 19 | 5.2x5.0x3.0 | 1MHz / 1V |
| PSTMAA5030-R68MG | 0.68 | 20% | 3.8 | 4.5 | 16 | 5.2x5.0x3.0 | 1MHz / 1V |
| PSTMAA5030-1R0MG | 1.00 | 20% | 6 | 7.5 | 12.5 | 5.2x5.0x3.0 | 1MHz / 1V |
| PSTMAA5030-3R3MG | 3.3 | 20% | 24 | 26.5 | 6.5 | 5.2x5.0x3.0 | 1MHz / 1V |
Reliability Test Summary
| Test Item | Specification & Requirement | Method Used |
| Solderability | Surface covered with new solder by 95% | Solder heat proof: Preheating: 180 10 90 seconds; Soldering: 255 5 for 3 1 sec |
| Mechanical Shock | Inductance change within 5%; Without mechanical damage | Drop down with 981m/s2 (100G) shock upon a rubber block method shock testing machine, 3 tests. |
| Vibration | Inductance change within 5%; Without mechanical damage | Vibration frequency: 10Hz to 55Hz to 10Hz 60 seconds cycle; Vibration time: 2 hours |
| Thermal Shock | Inductance change within 5%; Without mechanical damage | -55, (30 mins) -> room temp. (5 mins) -> 125, (30 mins) -> room temp. (5 mins) 100 cycles |
| Heat Resistance | Inductance change within 5%; Without mechanical damage | Apply IDC current @ 85 ambient; Duration: 1000 hrs |
| Humidity Resistance | Inductance change within 5%; Without mechanical damage | Apply IDC current @ 60 ambient; Humidity: 90~95; Duration: 1000 hrs |
| Low Temp. Storing | Inductance change within 5%; Without mechanical damage | Storing Temp. -55 2 for total 1,000 +4/-0 hours |
| High Temp. Storing | Inductance change within 5%; Without mechanical damage | Storing Temp. 125 2 for total 1,000 +4/-0 hours |
Packing Information
| Series | Reel Size (mm) | A | B | C | W | P | Po | Ao | Bo | Ko | MPQ | Middle box | Outer box |
| 5030 | 330 | 100 | 12.5 | 12 | 8 | 4 | 5.2Typ | 5.4 Typ | 3.3 Typ | 2000pcs | 6000pcs | 18000pcs |
Announcements
Please read the following before using the product:
- Product storage life is 12 months under conditions of 5~40 and 10~75% RH. Exceeding this period may cause oxidation of product terminals.
- Do not use or store in extreme environments (high salt, strong acids, strong alkalis, strong radiation, etc.).
- Preheat components before soldering. The temperature difference between preheating and soldering should be within 150.
- For soldering corrections after mounting, adhere to specified conditions. Excessive heat or repeated disassembly may lead to product failure.
- Avoid contact with cleaning agents, alcohol, or other liquids, as they can corrode the product and cause failure.
- Ensure no residual stress is applied to the inductor due to PCB deformation after soldering, which could cause cracking, detachment, or failure.
- Consider temperature rise due to increased current when designing.
- Protect against static electricity, as high levels can cause permanent damage.
- Do not touch any part of the product during operation to prevent electric shock.
- As a magnetic product, consider potential interactions with surrounding components.
- Suitable for general electronic equipment (AV, communication, home appliances, computers, etc.) under normal operating conditions. For applications requiring high safety and reliability, or where failure could cause serious damage, consult with the company before use. The company is not liable for consequences arising from use without written consent in such special applications (including , transportation, aerospace, power generation control, nuclear, explosive ignition control, traffic control, and national defense-related equipment).
2504101957_PROD-Tech-PSTMAA5030-R15MG_C46956296.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
