Product Overview
The TPE series conductive polymer tantalum solid capacitors are surface mount type components designed for general-purpose and standard use in electronic equipment. They offer a combination of small size, low ESR, and RoHS compliance with halogen-free materials. These capacitors are suitable for applications such as audio/visual equipment, home appliances, computers, office equipment, optical equipment, and measuring equipment. Key features include low profile and high capacitance options.
Product Attributes
- Brand: Panasonic (implied by context and notices)
- Type: Conductive Polymer Tantalum Solid Capacitors
- Mounting Type: Surface Mount
- Series: TPE
- Compliance: RoHS, Halogen free
- Certifications: EU RoHS Directive compliant
- Materials: No Ozone Depleting Chemicals (ODC's) used. No PBBs or PBDEs used as brominated flame retardants.
Technical Specifications
| Product Series | Case Size | Rated Voltage (V) | Category Voltage (V) | Rated Capacitance (F) | Category Temperature (C) | Rated Temperature (C) | Capacitance Tolerance | Leakage Current (A) | Dissipation Factor (tan ) | ESR (m max.) | Ripple Current (mA rms) | Dimensions (L W H mm) | Min. Packaging Q'ty (pcs) | Reflow Temp (C) | Floor Life Level |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TPE (B size) | B2 | 2.0 to 10 | 1.8 to 8 | 47 to 470 | -55 to +105 | 85 | 20 % (120 Hz / +20 ) | See Characteristics List | See Characteristics List | 15 m max. | See Characteristics List | 3.5 2.8 1.9 | 500/reel | 250 | 2a |
| TPE (D size) | D2E | 2.5 to 10 | 1.8 to 8 | 68 to 470 | -55 to +105 | 85 | 20 % (120 Hz / +20 ) | See Characteristics List | See Characteristics List | 7 m max. | See Characteristics List | 4.3 4.3 1.4 | 500/reel | 250 | 3 |
| TPE (D size) | D3L | 2.5 to 10 | 1.8 to 8 | 150 to 680 | -55 to +105 | 85 | 20 % (120 Hz / +20 ) | See Characteristics List | See Characteristics List | 7 m max. | See Characteristics List | 7.3 4.3 2.8 | 500/reel | 250 | 3 |
| TPE (D size) | D4 | 2.5 to 10 | 1.8 to 8 | 330 to 1500 | -55 to +105 | 85 | 20 % (120 Hz / +20 ) | See Characteristics List | See Characteristics List | 7 m max. | See Characteristics List | 7.3 4.3 3.8 | 500/reel | 250 | 3 |
| TPE (D size) | D15E | 2.5 to 10 | 1.8 to 8 | 150 to 1000 | -55 to +105 | 85 | 20 % (120 Hz / +20 ) | See Characteristics List | See Characteristics List | 7 m max. | See Characteristics List | 7.3 4.3 1.4 | 500/reel | 250 | 3 |
| Note: Some part numbers are not recommended for new design (NRFND). Please refer to the factory for current technical specifications before purchase and/or use. Design and specifications are subject to change without notice. | |||||||||||||||
Endurance:
- +85 , 1000 h, rated voltage applied
- +105 , 1000 h, rated voltage applied
- +85 , 2000 h, rated voltage applied (for some D size models)
- +105 , 2000 h, rated voltage applied (for some D size models)
Damp Heat (Steady State): +60 , 90 % to 95 % RH, 500 h, No-applied voltage
Reflow Conditions: 250 or 260 (depending on series/part number)
Storage Conditions: Unopened: 18 months or shorter after shipment. Opened: Seal in reel and moisture proof bag at 30 / 60 %RH. Use within 4 weeks (2a), 168 hours (3), or 48 hours (5) depending on floor life level.
Prohibited Circuits: High impedance voltage retention circuits, Coupling circuits, Time constant circuits, Circuits greatly affected by leakage current, Circuits with two or more POSCAPs in series.
Failure Mode: Primarily short circuit. May emit smoke. Installation of protective circuits is recommended.
Wear-out Failure: Electrolyte may insulate, causing open circuit after exceeding specified endurance/damp heat times.
Failure Rate: 0.5 % / 1000 h (B2 size or less: 1.0 %) with 60 % confidence level, under specific endurance conditions.
Application Limitations: Not intended for use in liquids, direct sunlight, dust, corrosive gases, strong static electricity or electromagnetic waves, near heat-generating components, sealed or coated with resin, with specific flux cleaning agents, or in atmospheres with stray acid/alkaline, excessive vibration/shock, low pressure, or decompression.
Safety Precautions: If safety concerns arise, contact the factory immediately. For applications requiring high reliability and safety, install protection circuits and/or redundant circuits. Do not apply voltage exceeding the full rated voltage. Rapid charge and discharge are restricted; protective circuits are recommended for rush current exceeding 20 A.
2410121820_PANASONIC-6TPE220MVB_C2972192.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
