Product Overview

The SVPG series conductive polymer aluminum solid capacitors are designed for surface mount applications, offering a low profile (4.5 mm max.), low ESR (6.5 m max.), and high ripple current capability (7500 mA rms max.). These capacitors are RoHS compliant and halogen-free, making them suitable for a wide range of general electronic equipment. They are engineered for reliability and performance, with features like self-recovery for leakage currents and a wide operating temperature range.

Product Attributes

• Brand: Panasonic (implied by safety and legal matters section)
• Type: Conductive Polymer Aluminum Solid Capacitors
• Mounting Type: Surface Mount
• Compliance: RoHS compliant, Halogen free

Technical Specifications

*1: Ripple current (100 kHz / +105 )
*2: ESR (100 kHz to 300 kHz / +20 )
*3: tan (120 Hz / +20 )
*4: After 2 minutes

General Specifications:

• Category temp. range: 55 to +105
• Capacitance tolerance: 20 % (120 Hz / +20 )
• Endurance: 5000 h, rated voltage applied at +105
• Damp heat (Steady state): +60 , 90 % to 95 % RH, 1000 h, No-applied voltage
• Capacitance change (Damp heat): Within 20 % of the initial value
• Dissipation factor (tan) (Damp heat): 150 % of the initial limit
• DC leakage current (Damp heat): Within the initial limit (after voltage processing)
• Capacitance change (Endurance): Within 20 % of the initial value
• Dissipation factor (tan) (Endurance): 150 % of the initial limit
• DC leakage current (Endurance): Within the initial limit

Dimensions (not to scale):

*1: Depends on the case size.

Frequency correction factor for ripple current:

Safety and Legal Matters to Be Observed:

• Product and specifications are subject to change without notice.
• Not designed for use in specific environments such as liquid exposure, direct sunlight, dusty, wet, corrosive gas, strong static electricity/electromagnetic waves, near heating components/flammable materials, sealed with resin, acidic/alkali atmosphere, excessive vibration/impact, or low atmospheric pressure.
• Cleaning precautions must be followed.
• Fixing agents and coating agents require careful selection to avoid acetone and ensure no residue.
• Use at a voltage equal to or lower than the rated voltage when impact or high pulse voltage is applied.
• Main failure mode is short-circuit; measures to prevent this are recommended.
• Not for high impedance, coupling, time constant, or leakage-current-sensitive circuits.
• Electrical characteristics may fluctuate within specified ranges.
• Leakage currents may increase due to stress but can self-recover.
• Protection circuits are advised for excessive rush currents.
• The resin on the case does not guarantee insulation; the case is not insulated from the cathode terminal.
• Soldering precautions for both iron and flow/reflow methods must be observed to avoid stress and damage.
• Handling after soldering requires care to prevent tilting, knocking, twisting, or moving the circuit board by grabbing the product.
• Component storage after opening the bag is time-limited to maintain solderability.
• Product complies with RoHS Directive (2011/65/EU and (EU) 2015/863).

Intellectual Property:

• U.S. patent: USP No. 7158367