Online Service

Online Service

Contact Person
+86 136 6733 2386
quality Low Impedance Radial Lead Aluminum Electrolytic Capacitor Nichicon UHW1J331MPD1TD Miniature Size RoHS factory
<
quality Low Impedance Radial Lead Aluminum Electrolytic Capacitor Nichicon UHW1J331MPD1TD Miniature Size RoHS factory
>
Specifications
Lifetime:
10000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
330uF
Height - Seated (Max):
27mm
Voltage Rating:
63V
Pin Spacing:
5mm
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
995mA@120Hz
Mfr. Part #:
UHW1J331MPD1TD
Package:
Through Hole,D10xL27mm
Key Attributes
Model Number: UHW1J331MPD1TD
Product Description

Product Overview

The UHW series of miniature aluminum electrolytic capacitors offers lower impedance at high frequencies, smaller case sizes, and high ripple current capabilities. These capacitors are compliant with the RoHS directive (2011/65/EU, (EU)2015/863). They are designed for applications requiring high reliability and performance, featuring a wide operating temperature range and a long endurance life.

Product Attributes

  • Brand: UHW Series (implied by part numbering and series name)
  • Type: Aluminum Electrolytic Capacitor
  • Construction: Radial Lead Type
  • Compliance: RoHS directive (2011/65/EU, (EU)2015/863)
  • Sleeve Material: Pb-free PET sleeve
  • Marking: White color letter on black sleeve

Technical Specifications

Category Specification
Category Temperature Range 40 to +105C
Rated Voltage Range 6.3 to 100V
Rated Capacitance Range 33 to 15000F
Capacitance Tolerance 20% at 120Hz, 20C
Leakage Current (max.) After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV (A)
Tangent of loss angle (tan ) Refer to detailed table below. For capacitance of more than 1000F, add 0.02 for every increase of 1000F.
Stability at Low Temperature (Z(25C) / Z(+20C)) Refer to detailed table below.
Endurance 8000 to 12000 hours (depending on rated voltage)
Endurance Conditions D.C. bias plus rated ripple current is applied at 105C, peak voltage not exceeding rated voltage. Capacitance change within 25% (30% for 6.3V, 10V), tan 200% of initial value, Leakage current initial specified value.
Frequency Coefficient of Rated Ripple Current
Cap. (F)120Hz1kHz10kHz10kHz or more
330.700.400.400.40
47 to 1800.750.400.500.50
220 to 5600.850.500.600.60
680 to 18000.870.600.750.75
2200 to 39000.900.750.850.85
4700 to 150000.950.850.900.90
Dimensions (D L mm) See individual part number specifications. Common dimensions include 8x11.5, 8x15, 8x20, 10x12.5, 10x16, 10x20, 10x25, 10x30.5, 10x40, 12.5x15, 12.5x20, 12.5x25, 12.5x30.5, 12.5x35.5, 12.5x40, 16x20, 16x25, 16x30.5, 16x35.5, 16x40, 18x20, 18x25, 18x30.5, 18x35.5, 18x40.
Lead Diameter (d) 0.6mm (for D < 10), 0.8mm (for D >= 10). For 12.5 dia. units with L > 25, d = 0.8mm.
Lead Pitch (P) Refer to dimension table (e.g., 5.0mm, 7.5mm).
Configuration Pressure relief vent, Sleeve (PET), Pb-free leadwire.

Detailed Specifications (Sample Data)

The following table provides a sample of detailed specifications for the UHW series. Please refer to the full datasheet for a complete list of part numbers and their corresponding specifications.

Rated Voltage (V) Capacitance (F) Case Size (DL mm) tan (max.) Leakage Current (A) Impedance () max. (20/100kHz) Rated Ripple Current (mArms) (105/100kHz) Part Number
6.3 820 811.5 0.21 51.66 0.10 1200 UHW0J821MPD
10 560 811.5 0.18 56 0.10 1200 UHW1A561MPD
16 470 811.5 0.15 75.2 0.10 1200 UHW1C471MPD
25 330 811.5 0.13 82.5 0.10 1200 UHW1E331MPD
35 180 811.5 0.11 63 0.10 1200 UHW1V181MPD
50 100 811.5 0.10 50 0.10 1200 UHW1H101MPD
63 68 811.5 0.09 42.84 0.29 950 UHW1J680MPD
80 47 811.5 0.09 37.6 0.29 950 UHW1K470MPD
100 33 811.5 0.08 33 0.29 950 UHW2A330MPD

2411201017_Nichicon-UHW1J331MPD1TD_C5111114.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max