<
>
Specifications
Operating Temperature:
-40℃~+105℃
Lifetime:
-
Capacitance:
1200uF
Height - Seated (Max):
25mm
Pin Spacing:
5mm
Voltage Rating:
35V
Diameter:
12.5mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
3.19A@100kHz
Mfr. Part #:
UHV1V122MHD
Package:
Through Hole,D12.5xL25mm
Key Attributes
Model Number:
UHV1V122MHD
Product Description
Product Overview
The 228 ALUMINUM ELECTROLYTIC CAPACITORS UHV series offers high ripple current and low impedance, particularly at high frequencies, in a smaller case size. These capacitors are compliant with the RoHS directive (2011/65/EU, (EU)2015/863) and approved by the Reliability Center for Electronic Component, Japan (Certification No. RCJ-03-23C). They are designed for applications requiring reliable performance under demanding conditions, featuring a wide operating temperature range and long endurance.
Product Attributes
- Product Series: UHV
- Type: Aluminum Electrolytic Capacitors
- Compliance: RoHS directive (2011/65/EU, (EU)2015/863)
- Certification: Reliability Center for Electronic Component, Japan (RCJ-03-23C)
- Lead Type: Radial Lead
- Sleeve Material: P.E.T.
- Leadwire: Pb-free
- Marking: White color letter on black sleeve
Technical Specifications
| Item | Specification |
|---|---|
| Category Temperature Range | -40 to +105C |
| Rated Voltage Range | 6.3 to 35V |
| Rated Capacitance Range | 47 to 8200F |
| Capacitance Tolerance | 20% at 120Hz, 20C |
| Leakage Current | After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A), whichever is greater. |
| Tangent of loss angle (tan ) MAX. | See table below |
| Stability at Low Temperature (Impedance ratio MAX.) | Z25C / Z+20C: See table below Z40C / Z+20C: See table below |
| Endurance | 6000 hours (5000 hours for D=5 and 6.3) at 105C with DC bias plus rated ripple current. Peak voltage shall not exceed rated voltage. |
| Capacitance Change (after endurance) | Within 25% of the initial capacitance value (6.3V, 10V: 30%) |
| Leakage Current (after endurance) | Less than or equal to the initial specified value |
| Tangent of loss angle (tan ) (after endurance) | 200% or less than the initial specified value |
| Pressure Relief Vent | d (6.3up) |
| Lead Wire Dimensions | d (6.3up) |
| Sleeve | P.E.T. |
Dimensions and Impedance Table (Example: 6.3V, 47F)
| Cap. (F) | V (Code) | Case Size D L (mm) | Impedance () MAX. 20C / 100kHz | Impedance () MAX. 10C / 100kHz | Rated Ripple (mArms) 105C / 100kHz |
|---|---|---|---|---|---|
| 47 | 6.3 (0J) | 5 11 | 0.76 | 0.23 | 360 |
| 68 | 6.3 (0J) | 6.3 11 | 0.33 | 0.10 | 450 |
| 100 | 6.3 (0J) | 6.3 11 | 0.33 | 0.10 | 550 |
| 150 | 6.3 (0J) | 8 11.5 | 0.181 | 0.059 | 820 |
| 220 | 6.3 (0J) | 8 11.5 | 0.181 | 0.059 | 990 |
| 270 | 6.3 (0J) | 8 11.5 | 0.181 | 0.059 | 990 |
| 330 | 6.3 (0J) | 10 12.5 | 0.133 | 0.043 | 1330 |
| 390 | 6.3 (0J) | 10 12.5 | 0.133 | 0.043 | 1360 |
| 470 | 6.3 (0J) | 8 15 | 0.143 | 0.046 | 1330 |
| 560 | 6.3 (0J) | 10 16 | 0.105 | 0.031 | 1550 |
| 680 | 6.3 (0J) | 10 16 | 0.095 | 0.030 | 1815 |
| 820 | 6.3 (0J) | 8 20 | 0.105 | 0.031 | 1550 |
| 1000 | 6.3 (0J) | 10 16 | 0.095 | 0.030 | 1650 |
| 1200 | 6.3 (0J) | 10 16 | 0.095 | 0.030 | 1815 |
| 1500 | 6.3 (0J) | 10 20 | 0.057 | 0.019 | 2160 |
| 1800 | 6.3 (0J) | 8 20 | 0.105 | 0.031 | 1550 |
| 2200 | 6.3 (0J) | 10 20 | 0.057 | 0.019 | 2160 |
| 2700 | 6.3 (0J) | 10 25 | 0.051 | 0.017 | 2475 |
| 3300 | 6.3 (0J) | 12.5 20 | 0.041 | 0.016 | 2475 |
| 3900 | 6.3 (0J) | 12.5 20 | 0.041 | 0.016 | 2725 |
| 4700 | 6.3 (0J) | 12.5 25 | 0.036 | 0.014 | 3190 |
| 5600 | 6.3 (0J) | 12.5 31.5 | 0.031 | 0.012 | 3795 |
| 6800 | 6.3 (0J) | 12.5 35.5 | 0.029 | 0.011 | 3925 |
| 8200 | 6.3 (0J) | 16 25 | 0.033 | 0.012 | 3990 |
Tan (MAX.) Table
| Rated Voltage (V) | tan (MAX.) at 120Hz |
|---|---|
| 6.3 | 0.23 |
| 10 | 0.10 |
| 16 | 0.10 |
| 25 | 0.059 |
| 35 | 0.059 |
Low Temperature Impedance Ratio Table
| Rated Voltage (V) | Z25C / Z+20C (MAX.) | Z40C / Z+20C (MAX.) |
|---|---|---|
| 6.3 | 0.76 | 0.40 |
| 10 | 0.33 | 0.50 |
| 16 | 0.33 | 0.60 |
| 25 | 0.181 | 0.75 |
| 35 | 0.181 | 0.85 |
Frequency Coefficient of Rated Ripple Current
| Capacitance (F) | 120Hz | 1kHz | 10kHz | 100kHz or more |
|---|---|---|---|---|
| 47 to 150 | 0.75 | 0.40 | 0.90 | 0.95 |
| 220 to 560 | 0.85 | 0.50 | 0.94 | 0.98 |
| 680 to 1800 | 0.87 | 0.60 | 0.95 | 1.00 |
| 2200 to 3900 | 0.90 | 0.75 | 0.95 | 1.00 |
| 4700 to 8200 | 0.95 | 0.85 | 1.00 | 1.00 |
2410121251_Nichicon-UHV1V122MHD_C445373.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
