Product Overview
The UPM series of aluminum electrolytic capacitors are designed for low impedance and high reliability applications. They offer a long operational life, withstanding 5000 hours of load life at +105C (reduced for smaller case sizes). These capacitors are compliant with the RoHS directive (2011/65/EU, (EU)2015/863) and are AEC-Q200 compliant. They are suitable for a wide range of applications requiring stable performance across various temperature ranges and voltage ratings.
Product Attributes
- Brand: UPM Series
- Capacitor Type: Aluminum Electrolytic
- Construction: Radial Lead Type
- Sleeve Material: Pb-free PET sleeve
- Environmental Compliance: RoHS Directive compliant (2011/65/EU, (EU)2015/863), AEC-Q200 compliant
- Marking: White letter on dark brown sleeve
Technical Specifications
| Series | Rated Voltage (V) | Rated Capacitance (F) | Case Size (DL mm) | Capacitance Tolerance | Leakage Current (A) MAX. (at 20C after 1 min) | Tangent of loss angle (tan ) MAX. (120Hz, 20C) | Impedance () MAX. (20C/100kHz) | Rated Ripple Current (mArms) (105C/10-200kHz) | Endurance (hours at 105C) | Operating Temperature Range | Part Number Example |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UPM | 6.3 to 450 | 1 to 15000 | Various (e.g., 5x11, 6.3x11, 8x11.5, 10x12.5, 12.5x15, 16x15, 18x15) | 20% at 120Hz, 20C | CV 1000: 0.1CV+40 (A) or less CV > 1000: 0.04CV+100 (A) or less (For capacitance > 1000F, add 0.02 for every 1000F increase) | See table below | See table below | See table below | 3000/2000 hours (smaller case sizes as specified) | -55 to +105C (6.3 to 100V) -40 to +105C (160 to 400V) -25 to +105C (450V) | UPM0J101MDD |
Performance Characteristics
Stability at Low Temperature:
| Rated Voltage (V) | Impedance ratio (MAX.) Z25C / Z+20C | Z40C / Z+20C | Z55C / Z+20C |
|---|---|---|---|
| 6.3 | 4 | 16 | |
| 10 | 3 | 16 | |
| 25 35 | 3 | 10 | |
| 50 to 100 | 2 | 6 | |
| 160 200 | 4 | ||
| 250 | 6 | ||
| 315 350 | 8 | ||
| 400 | 10 | ||
| 450 | 15 |
Tangent of loss angle (tan ) (MAX.):
| Rated Voltage (V) | tan (MAX.) (120Hz) |
|---|---|
| 6.3 to 100 | 0.19 |
| 160 to 350 | 0.20 |
| 400 450 | 0.25 |
Endurance Performance Characteristics (after storing at 105C for 1000 hours):
| Item | Condition |
|---|---|
| Leakage current | Less than or equal to the initial specified value |
| tan | 150% or less than the initial specified value |
| Capacitance change | Within 20% of the initial capacitance value |
Specific Model Data (Example Snippet):
| Rated Voltage (V) | Rated Capacitance (F) | Case Size (DL mm) | tan MAX. (20C/100kHz) | Leakage Current (A) MAX. (at 20C after 1 min) | Impedance () MAX. (105C/10-200kHz) | Rated Ripple Current (mArms) (105C/120Hz) | Part Number |
|---|---|---|---|---|---|---|---|
| 6.3 | 100 | 511 | 0.22 | 18.9 | 0.85 | 1.70 | UPM0J101MDD |
| 6.3 | 470 | 815 | 0.22 | 88.83 | 0.14 | 0.28 | UPM0J471MPD |
| 10 | 100 | 6.311 | 0.19 | 30 | 0.55 | 1.10 | UPM1A101MED |
| 16 | 1000 | 1031.5 | 0.16 | 480 | 0.047 | 0.094 | UPM1C102MPD |
| 25 | 1000 | 12.525 | 0.14 | 750 | 0.036 | 0.072 | UPM1E102MHD |
| 35 | 1000 | 12.531.5 | 0.12 | 1050 | 0.029 | 0.058 | UPM1V102MHD |
| 50 | 1000 | 1631.5 | 0.10 | 1500 | 0.030 | 0.060 | UPM1H102MHD |
| 63 | 1000 | 1640 | 0.08 | 1890 | 0.027 | 0.054 | UPM1J102MHD |
| 80 | 1000 | 1840 | 0.08 | 2400 | 0.044 | 0.12 | UPM1K102MHD |
| 100 | 100 | 1031.5 | 0.08 | 300 | 0.15 | 0.41 | UPM2A101MPD |
| 160 | 1 | 811.5 | 0.20 | 60 | UPM2C010MPD | ||
| 200 | 1 | 811.5 | 0.20 | 60 | UPM2D010MPD | ||
| 250 | 1 | 811.5 | 0.20 | 65 | UPM2E010MPD | ||
| 315 | 1 | 811.5 | 0.20 | 71.5 | UPM2F010MPD | ||
| 350 | 1 | 1012.5 | 0.20 | 75 | UPM2V010MPD | ||
| 400 | 1 | 1012.5 | 0.25 | 80 | UPM2G010MPD | ||
| 450 | 1 | 1016 | 0.25 | 85 | UPM2W010MPD |
Dimensions:
| d (mm) | D (mm) | P (mm) | L (mm) |
|---|---|---|---|
| 0.5 | 5 | 2.0 | 1.5 (for D < 10), 2.0 (for D >= 10) |
| 0.5 | 6.3 | 2.5 | 1.5 (for D < 10), 2.0 (for D >= 10) |
| 0.6 | 8 | 3.5 | 1.5 (for D < 10), 2.0 (for D >= 10) |
| 0.6 | 10 | 5.0 | 1.5 (for D < 10), 2.0 (for D >= 10) |
| 0.6 | 12.5 | 1.5 (for D < 10), 2.0 (for D >= 10) | |
| 0.8 | 16 | 7.5 | 1.5 (for D < 10), 2.0 (for D >= 10) |
| 0.8 | 18 | 7.5 | 1.5 (for D < 10), 2.0 (for D >= 10) |
Note: For L > 25 for the 12.5 dia. unit, lead dia. d = 0.8mm.
For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code 1 and then add the appropriate code.
2410121757_Nichicon-UPM1H221MHD6_C1498049.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
