<
>
Specifications
Operating Temperature:
-55℃~+105℃
Lifetime:
1000hrs@105℃
Capacitance:
100uF
Height - Seated (Max):
-
Voltage Rating:
50V
Diameter:
-
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
140mA@120Hz
Mfr. Part #:
UWT1H101MNL1GS
Package:
SMD,D8xL10mm
Key Attributes
Model Number:
UWT1H101MNL1GS
Product Description
Product Overview
The CAT.8100D series are aluminum electrolytic capacitors designed for surface mounting on high-density PC boards. These chip-type capacitors offer a wide operating temperature range from 55 to +105C and are suitable for automatic mounting machines fed with carrier tape. They are compliant with the RoHS directive (2011/65/EU). The WT series features a chip type with a wide temperature range, designed for surface mounting on high-density PC boards and applicable to automatic mounting machine fed with carrier tape.
Product Attributes
- Series: WT series
- Type: Chip Type, Wide Temperature Range
- Compliance: RoHS directive (2011/65/EU)
- Mounting: Surface mounting on high density PC board
- Applicability: Automatic mounting machine fed with carrier tape
Technical Specifications
| Item | Specification |
|---|---|
| Category Temperature Range | 55 to +105C |
| Rated Voltage Range | 4 to 50V |
| Rated Capacitance Range | 0.1 to 1500F |
| Capacitance Tolerance | 20% at 120Hz, 20C |
| Leakage Current | After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (A), whichever is greater. |
| Tangent of loss angle (tan ) | Measurement frequency: 120Hz at 20C |
| Stability at Low Temperature | Impedance ratio ZT / Z20 (MAX.) |
| Endurance | The specifications listed shall be met when the capacitors are restored to 20C after the rated voltage is applied for 1000 hours at 105C. |
| Shelf Life | After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics. |
| Resistance to soldering heat | Capacitors are kept on a hot plate for 30 seconds, maintained at 250C. They shall meet characteristic requirements when removed and restored to 20C. |
| Marking | Black print on the case top. |
Dimensions and Capacitance Values
| Cap. (F) | D L (mm) | Rated ripple current (mArms) at 105C 120Hz | Code |
|---|---|---|---|
| 0.1 | 4 5.4 | 1.0 | 0G V |
| 0.22 | 4 5.4 | 2.6 | 0J 6.3 |
| 0.33 | 4 5.4 | 3.2 | 1A 10 |
| 0.47 | 4 5.4 | 3.8 | 1C 16 |
| 1 | 4 5.4 | 6.3 | 1E 25 |
| 2.2 | 5 5.4 | 11 | 1V 35 |
| 3.3 | 5 5.4 | 14 | 1H 50 |
| 4.7 | 6.3 5.4 | 19 | |
| 10 | 6.3 5.4 | 30 | |
| 22 | 6.3 5.8 | 51 | |
| 33 | 6.3 7.7 | 60 | |
| 47 | 8 10 | 140 | |
| 100 | 8 10 | 210 | |
| 150 | 10 10 | 230 | |
| 220 | 10 10 | 310 | |
| 330 | 10 10 | 310 | |
| 470 | 10 10 | 310 | |
| 680 | 10 10 | 310 | |
| 1000 | 10 10 | 310 | |
| 1500 | 10 10 | 310 |
Performance Characteristics
| Rated voltage (V) | tan (MAX.) |
|---|---|
| 4 | 0.40 |
| 6.3 | 0.30 |
| 10 | 0.24 |
| 16 | 0.20 |
| 25 | 0.16 |
| 35 | 0.14 |
| 50 | 0.14 |
| Rated voltage (V) | Impedance ratio ZT / Z20 (MAX.) |
|---|---|
| 4 | 7 |
| 6.3 | 4 |
| 10 | 3 |
| 16 | 2 |
| 25 | 2 |
| 35 | 2 |
| 50 | 2 |
| Item | Specification |
|---|---|
| Capacitance change | Within 25% of the initial capacitance value for capacitors of 3mm unit, and 16V or less. Within 20% of the initial capacitance value for capacitors of 25V or more. |
| Leakage current | 200% or less than the initial specified value |
| tan | Less than or equal to the initial specified value |
| Capacitance change (Low Temperature) | Within 10% of the initial capacitance value |
| Leakage current (Low Temperature) | Less than or equal to the initial specified value |
| tan (Low Temperature) | Less than or equal to the initial specified value |
| Frequency | Coefficient |
|---|---|
| 50 Hz | 0.70 |
| 120 Hz | 1.00 |
| 300 Hz | 1.17 |
| 1 kHz | 1.36 |
| 10 kHz or more | 1.50 |
2409291036_Nichicon-UWT1H101MNL1GS_C445063.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
