<
>
Specifications
Voltage Rating:
16V
Capacitance:
220uF
Lifetime:
15000hrs@105℃
Tolerance:
±20%
Pin Spacing:
-
Equivalent Series Resistance(ESR):
20mΩ
Height - Seated (Max):
6.1mm
Operating Temperature:
-55℃~+105℃
Ripple Current:
175mA@120Hz
Diameter:
6.3mm
Mfr. Part #:
APXJ160ARA221MF61G
Package:
SMD,D6.3xL6.1mm
Key Attributes
Model Number:
APXJ160ARA221MF61G
Product Description
Product Overview
The NPCAP-PXJ Series conductive polymer aluminum solid capacitors offer super low ESR, impedance, and high heat resistance due to their conductive polymer electrolyte. These capacitors are designed for demanding applications such as DC-DC converters, voltage regulators, and decoupling on computer motherboards. They are solvent-resistant, RoHS2 compliant, and Halogen Free, ensuring environmental responsibility and suitability for modern electronic designs.
Product Attributes
- Brand: NPCAP
- Series: PXJ Series
- Material: Conductive Polymer Aluminum Solid Electrolyte
- Certifications: RoHS2 Compliant, Halogen Free
- Features: Super low ESR, Super low impedance, High heat resistance, Solvent resistant type
Technical Specifications
| Item | Specification | Details | |||||
|---|---|---|---|---|---|---|---|
| Category Temperature Range | -55 to +105 | ||||||
| Rated Voltage Range | 2.5 to 25Vdc | ||||||
| Capacitance Range | 56 to 1,200F | ||||||
| Capacitance Tolerance | 20% (M) (at 20, 120Hz) | ||||||
| Leakage Current | Shall not exceed values shown in STANDARD RATINGS (at 20 after 2 minutes) | ||||||
| Dissipation Factor (tan) | 0.12 max. (at 20, 120Hz) | ||||||
| Low Temperature Characteristics (Max. Impedance Ratio) | Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) | ||||||
| Endurance | Satisfied after 15,000 hours at 105 with rated voltage applied (Appearance, Capacitance change 20%, D.F. (tan) 150% of initial, ESR 150% of initial, Leakage current initial) | ||||||
| Bias Humidity | Satisfied after 1,000 hours at 60, 90-95% RH with DC rated voltage applied (Appearance, Capacitance change 20%, D.F. (tan) 150% of initial, ESR 150% of initial, Leakage current initial) | ||||||
| Surge Voltage | Subjected to 1,000 cycles at 105 (30s charge with surge voltage via R=1k, 5m 30s discharge) | See table for specific surge voltages per rated voltage. | |||||
| Soldering Heat | Satisfied after soldering under recommended conditions (Appearance, Capacitance value within tolerance, D.F. (tan) initial, ESR initial, Leakage current initial) | ||||||
| Failure Rate | 0.5% per 1,000 hours maximum (Confidence level 60% at 105) | (Voltage treatment: DC rated voltage applied for 120 minutes at 105) | |||||
| Case Size Range | 6.35.8L to 86.7L | ||||||
| Dimensions (mm) | D0.5 | L0.3 | A0.2 | B0.2 | C0.2 | W (0.5 to 0.8 or 0.7 to 1.1) | P (1.9 or 3.1) |
| Size Code | D | L | A | B | C | W | P |
| F61 | 6.3 | 5.8 | 6.6 | 6.6 | 7.2 | 0.5 to 0.8 | 1.9 |
| F80 | 6.3 | 7.7 | 6.6 | 6.6 | 7.2 | 0.5 to 0.8 | 1.9 |
| FA0 | 6.3 | 9.7 | 6.6 | 6.6 | 7.2 | 0.5 to 0.8 | 1.9 |
| H70 | 8 | 6.7 | 8.3 | 8.3 | 9.0 | 0.7 to 1.1 | 3.1 |
| Standard Ratings (Example) | WV (Vdc) | Cap (F) | Size code | Leakage current (A max./after 2min.) | ESR (m max./20, 100k to 300kHz) | Rated ripple current (mArms/105, 100kHz) | Part No. |
| 2.5 | 820 | F61 | 1,020 | 10 | 4,900 | APXJ2R5ARA821MF61G | |
| 6.3 | 390 | F61 | 1,220 | 10 | 4,900 | APXJ6R3ARA391MF61G | |
| 10 | 270 | F61 | 1,350 | 15 | 4,000 | APXJ100ARA271MF61G | |
| 16 | 220 | F61 | 704 | 20 | 3,500 | APXJ160ARA221MF61G | |
| 20 | 150 | F61 | 600 | 23 | 3,300 | APXJ200ARA151MF61G | |
| 25 | 56 | F61 | 280 | 28 | 3,000 | APXJ250ARA560MF61G | |
| Rated Ripple Current Multipliers | Frequency Multipliers (SMD type): 120Hz (0.05), 1k (0.30), 10k (0.55), 50k (0.70), 100k to 500k (1.00) | ||||||
Note: Product specifications are subject to change without notice. Request product specifications before purchase and/or use.
2411200117_NCC-APXJ160ARA221MF61G_C2157821.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
