Online Service

Online Service

Contact Person
+86 136 6733 2386
quality Conductive Polymer Capacitors NCC APSC6R3ELL471MH08S with Wide Temperature Range and RoHS2 Compliance factory
<
quality Conductive Polymer Capacitors NCC APSC6R3ELL471MH08S with Wide Temperature Range and RoHS2 Compliance factory
>
Specifications
Voltage Rating:
6.3V
Capacitance:
470uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
3.5mm
Equivalent Series Resistance(ESR):
8mΩ
Height - Seated (Max):
8mm
Ripple Current:
5.7A@100kHz
Diameter:
8mm
Operating Temperature:
-55℃~+105℃
Mfr. Part #:
APSC6R3ELL471MH08S
Package:
Through Hole,D8xL8mm
Key Attributes
Model Number: APSC6R3ELL471MH08S
Product Description

Product Overview

The NPCAP-PSC Series by NIPPON CHEMI-CON are conductive polymer aluminum solid capacitors designed for high-performance applications. These capacitors offer super low ESR and high ripple current capability, making them ideal for DC-DC converters, voltage regulators, and decoupling applications, particularly for computer motherboards. Key features include a wide rated voltage range from 2.5 to 16Vdc, nominal capacitance from 270 to 2,700F, and an extended endurance of 15,000 hours at 105. The series also includes solvent-resistant types and is RoHS2 Compliant and Halogen Free.

Product Attributes

  • Brand: NIPPON CHEMI-CON
  • Series: NPCAP-PSC Series
  • Type: Conductive Polymer Aluminum Solid Capacitors
  • Certifications: RoHS2 Compliant, Halogen Free
  • Special Features: Solvent resistant type

Technical Specifications

Category Characteristic
Category Temperature Range -55 to +105
Rated Voltage Range 2.5 to 16Vdc
Capacitance Tolerance 20% (M) (at 20, 120Hz)
Leakage Current I=0.2CV or 500A, whichever is greater. (at 20 after 2 minutes)
Dissipation Factor (tan) 0.10 max. (at 20, 120Hz)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25)/Z(+20)1.15, Z(-55)/Z(+20)1.25 (at 100kHz)
Endurance 15,000 hours at 105 (Rated voltage applied)
Bias Humidity Test 1,000 hours at 60, 90 to 95% RH (DC voltage applied)
Surge Voltage Test 1,000 cycles at 105 (Charge for 30s with protective resistor R=1k, discharge for 5m 30s)

Standard Ratings

WV (Vdc) Cap (F) Case size DL(mm) ESR (m max./20, 100k to 300kHz) Rated ripple current (mArms/105, 100kHz) Part No. Example
2.5 560 88 7 6,100 APSC2R5E561MH08S
2.5 820 88 5 6,100 APSC2R5E821MH08J
2.5 820 88 7 6,100 APSC2R5E821MH08S
2.5 1,000 88 7 6,100 APSC2R5E102MH08S
2.5 1,000 811.5 7 6,100 APSC2R5E102MHB5S
2.5 1,500 811.5 7 6,100 APSC2R5E152MHB5S
2.5 2,700 1011.5 8 5,560 APSC2R5E272MJB5S
4 560 88 7 6,100 APSC4R0E561MH08S
4 680 811.5 7 6,100 APSC4R0E681MHB5S
4 1,000 1011.5 6 6,640 APSC4R0E102MJB5S
6.3 470 88 8 5,700 APSC6R3E471MH08S
6.3 560 88 8 5,700 APSC6R3E561MH08S
6.3 820 1011.5 7 6,640 APSC6R3E821MJB5S
6.3 1,500 1011.5 10 5,560 APSC6R3E152MJB5S
10 390 811.5 9 5,650 APSC100E391MHB5S
10 680 1011.5 7 6,100 APSC100E681MJB5S
16 270 811.5 11 5,080 APSC160E271MHB5S
16 330 1011.5 10 6,100 APSC160E331MJB5S
16 330 1012.5 10 6,100 APSC160E331MJC5S
16 470 1011.5 10 6,100 APSC160E471MJB5S

Dimensions

Size code D d F D' L' H0
H08 8.0 0.6 3.5 - L+1.0max. -
HB5 8.0 0.8 (Note1) 3.5 - L+1.5max. -
JB5 10.0 0.8 (Note1) 5.0 - - -
JC5 10.0 0.6 5.0 D+0.5max. - -

Note1: 0.6 for rated volt 16V.

Surge Voltage Ratings

Rated voltage (Vdc) Surge voltage (Vdc)
2.5 2.9
4.0 4.6
6.3 7.2
10 12
16 18

Rated Ripple Current Multipliers

Frequency (Hz) Radial lead type
120 0.10
1k 0.35
10k 0.60
50k 0.80
100k to 500k 1.00

Important Notes

Product specifications are subject to change without notice. Request product specifications before purchase and/or use. Use products based on the information contained in this catalog and product specifications. Always read "Notes on Use" before using the product. Request the Product Specification on the product of NIPPON CHEMI-CON CORPORATION to refer to it as well as this brochure prior to the order of the products. Products are designed and manufactured for general electronics equipment use and are not intended for use in applications that can adversely affect human life or cause damage to life or property, or have a major social impact. Consult with us in advance of usage in applications such as Aerospace, Power generation, Medical, Transport, Disaster prevention, Highly publicized information processing, Submarine equipment, or other non-general-purpose applications. The circuits described as examples do not guarantee functionality in your equipment systems. We are not responsible for any failures or damage caused by the use of information contained herein. You bear final responsibility regarding the use of our products. Take appropriate safety measures such as redundant design and malfunction prevention measures. Purchase Nippon Chemi-Con products only through official sales channels. We reserve the right to discontinue production and delivery of products. If a product does not meet published specifications, stop using it promptly and contact us immediately. Compensation for non-conforming goods is limited to replacement, credit of piece price, or other necessary means, and applicable lot items will be limited due to our established traceability system.


2411200040_NCC-APSC6R3ELL471MH08S_C3275621.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max