Product Overview
The NPCAP-PXJ Series Conductive Polymer Aluminum Solid Capacitors offer super low ESR, impedance, and high heat resistance due to their conductive polymer electrolyte. These capacitors are suitable for demanding applications such as DC-DC converters, voltage regulators, and decoupling on computer motherboards. They are solvent resistant, RoHS2 compliant, and Halogen Free.
Product Attributes
- Brand: NPCAP
- Series: PXJ Series
- Type: Conductive Polymer Aluminum Solid Capacitors
- Electrolyte: Conductive Polymer
- Certifications: RoHS2 Compliant, Halogen Free
- Special Features: Solvent resistant type
Technical Specifications
| Category | Characteristic | Specification |
|---|---|---|
| General | Category Temperature Range | -55 to +105 |
| General | Rated Voltage Range | 2.5 to 25Vdc |
| General | Capacitance Range | 56 to 1,200F |
| General | Case Size Range | 6.35.8L to 86.7L |
| Electrical | Capacitance Tolerance | 20% (M) (at 20, 120Hz) |
| Electrical | Leakage Current | Shall not exceed values shown in STANDARD RATINGS. (at 20 after 2 minutes) |
| Electrical | Dissipation Factor (tan) | 0.12 max. (at 20, 120Hz) |
| Electrical | Low Temperature Characteristics (Max. Impedance Ratio) | Z(-25)/Z(+20)1.15, Z(-55)/Z(+20)1.25 (at 100kHz) |
| Reliability | Endurance | Satisfied after 15,000 hours at 105 with rated voltage applied. Specifications include: Appearance (No significant damage), Capacitance change (20% of initial), D.F. (tan) (150% of initial), ESR (150% of initial), Leakage current ( initial specified value). |
| Reliability | Bias Humidity | Satisfied after 1,000 hours at 60, 90-95% RH with DC rated voltage. Specifications include: Appearance (No significant damage), Capacitance change (20% of initial), D.F. (tan) (150% of initial), ESR (150% of initial), Leakage current ( initial specified value). |
| Reliability | Surge Voltage | Subjected to 1,000 cycles at 105 with surge voltage and protective resistor (R=1k). Specifications include: Appearance (No significant damage), Capacitance change (20% of initial), D.F. (tan) (150% of initial), ESR (150% of initial), Leakage current ( initial specified value). |
| Reliability | Soldering Heat | Satisfied after soldering under recommended conditions. Specifications include: Appearance (No significant damage), Capacitance value (Within specified tolerance), D.F. (tan) ( initial specified value), ESR ( initial specified value), Leakage current ( initial specified value). |
| Reliability | Failure Rate | 0.5% per 1,000 hours maximum (Confidence level 60% at 105) |
| Dimensions | Case Size (DL) | 6.35.8L (F61), 6.37.7L (F80), 6.39.7L (FA0), 86.7L (H70) |
| Dimensions | Lead Spacing (P) | 1.9mm (F61, F80, FA0), 3.1mm (H70) |
| Dimensions | Width (W) | 0.5 to 0.8mm (F61, F80, FA0), 0.7 to 1.1mm (H70) |
| Dimensions | Other Dimensions (A, B, C) | Refer to diagram (A0.2, B0.2, C0.2 for F61/F80/FA0; A0.2, B0.2, C0.2 for H70) |
| Part Numbering | Series Code | PXJ |
| Part Numbering | Voltage Code Examples | 2.5V: 2R5, 6.3V: 6R3, 10V: 100, 16V: 160, 20V: 200, 25V: 250 |
| Part Numbering | Capacitance Code Examples | 820F: 821, 390F: 391, 270F: 271, 220F: 221, 150F: 151, 56F: 560 |
| Standard Ratings | Example Part No. | APXJ2R5ARA821MF61G (2.5V, 820F, F61 size) |
| Standard Ratings | Example ESR (m max.) | 10 (2.5V 820F F61) |
| Standard Ratings | Example Leakage Current (A max.) | 1,020 (2.5V 820F F61) |
| Standard Ratings | Example Rated Ripple Current (mArms) | 4,900 (2.5V 820F F61) |
| Ripple Current Multipliers | Frequency Multipliers (SMD type) | 120Hz: 0.05, 1k: 0.30, 10k: 0.55, 50k: 0.70, 100k to 500k: 1.00 |
Note: Product specifications are subject to change without notice. Request product specifications before purchase and/or use.
2410121934_NCC-APXJ160ARA271MF80G_C2157817.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible