<
>
Specifications
Voltage Rating:
2.5V
Capacitance:
820uF
Lifetime:
-
Tolerance:
±20%
Pin Spacing:
-
Equivalent Series Resistance(ESR):
-
Height - Seated (Max):
8mm
Operating Temperature:
-55℃~+105℃
Diameter:
8mm
Ripple Current:
-
Mfr. Part #:
PCR0EHN821MB08LL35WP
Package:
Through Hole,D8xL8mm
Key Attributes
Model Number:
PCR0EHN821MB08LL35WP
Product Description
Product Overview
The HPN Series is a range of Aluminium electrolytic capacitors with conductive polymer solid electrolyte, designed for various electronic applications. These capacitors offer reliable performance and durability.
Product Attributes
- Brand: Nantong Jianghai Capacitor Co., Ltd.
- Origin: China
- Product Type: Conductive polymer solid aluminum electrolytic capacitor
- Series: HPN Series
- Product Code: PCR0EHN821MB08LL35WP
- Customer P/N: Not specified
- Default Marking Color: Red (adjustable per customer request)
Technical Specifications
| Item | Specifications | Test Method/Conditions |
| Rated voltage | 2.5 V | |
| Rated capacitance | 820 F | 20, 120Hz |
| Case size | 8 8 | |
| Tolerance on rated capacitance | 20 % | |
| Surge voltage | 2.9 V | |
| Leakage current | 500 A (max.) | 20, After 2 minutes |
| Tangent of loss angle (tan) | 8 % (max.) | 20, 120Hz |
| Equivalent Series Resistance (ESR) | 7 m (max.) | 100 kHz |
| Rated ripple current | 6100 mA | 105 , 100kHz |
| Category temperature range | -55 to 105 | |
| Lifespan | 105 , 2000 h | |
| Frequency coefficient for ripple current | 120Hz1kHz: 0.05; 1kHz10kHz: 0.3; 10kHz100kHz: 0.7; 100kHz500kHz: 1.0 | |
| Leakage current (Test Method) | See specifications list | Series resistor: 1,000 . Applied rated voltage 2 minutes. Voltage treatment: Apply rated voltage for 2h at 105 2 with 1,000 resistor, then cool and store for 12-24h. |
| Capacitance (Test Method) | See specifications list | Measuring circuit: Equivalent series circuit. Frequency: 120 Hz10%. Measuring voltage: 0.5 Vrms. |
| Tangent of loss angle (tan) (Test Method) | See specifications list | Measuring temperature: 202. |
| Equivalent Series Resistance (ESR) (Test Method) | See specifications list | Frequency: 100 kHz10%. Measuring voltage: 0.5Vrms, Measuring temperature: 202. |
| Solderability | At least 95% of circumferential surface of the dipped portion of termination shall be covered with new solder. | Flux: Rosin // Ethanol, About 25 wt%. Solder bath method: 2453 for Sn-Ag-Cu solder, Duration: 30.3 seconds. |
| Robustness of Appearance (Tensile) | No visible damage, Legible marking | Ua1: See table for force and time based on diameter (d). |
| Robustness of Appearance (Bending) | No visible damage, Legible marking | Ub: See table for force and cycles based on diameter (d). |
| Resistance to soldering heat (Capacitance change) | Within 5% of the initial value | A) Solder bath method: 2605C, 10 1 sec. B) Soldering iron method: 40010C, 3+1/0 sec. |
| Resistance to soldering heat (tan) | Within the value of item 2. | |
| Resistance to soldering heat (Leakage current) | Within the value of item 2. | |
| Resistance to soldering heat (Appearance) | No visible damage, Legible marking | Heat protector: t=1.6 mm glass-epoxy board. |
| Vibration (Capacitance) | Capacitance value shall not show drastic change compared to the initial capacitance when measured within 30 minutes. | Frequency: 10 to 55 Hz (1 minute interval / 10 55 10 Hz). Amplitude: 0.75 mm (Total excursion 1.5 mm). Direction: X, Y, Z (3 axes). Duration: 2 hours / axial (Total 6 hour). Capacitors are supported as shown in figure. |
| Vibration (Capacitance change) | Within 5% of the initial value | |
| Vibration (Appearance) | No visible damage, Legible marking | |
| Rapid change of temperature (Capacitance change) | Within 10% of the initial value | Applied voltage: Without load. Cycle number: 5 cycles. TA= -55 TB= 105 . |
| Rapid change of temperature (tan) | Within the value of item 2. | |
| Rapid change of temperature (Leakage current) | Within the value of item 2. | |
| Rapid change of temperature (Appearance) | No visible damage, Legible marking | |
| Shelf Life (Capacitance change) | Within 20% of the initial value | Temperature: 105 2. Time: 1000+36 hours. Voltage treatment: Apply rated voltage for 30 minutes with protective resistor (1K), discharge, and store at room temperature for 2448 hours. |
| Shelf Life (tan) | Within 2 times of the value of item 2. | |
| Shelf Life (Leakage current) | Within the value of item 2. | |
| Endurance (Capacitance change) | Within 20% of the initial value | Temperature: 105 2. Duration: 2000 +48/-0h. Applied voltage: Rated voltage. |
| Endurance (tan) | Within 1.5 times of the value of item 2. | |
| Endurance (ESR) | Within 1.5 times of the value of item 2. | |
| Endurance (Leakage current) | Within the value of item 2. | |
| Endurance (Appearance) | No visible damage, Legible marking | |
| Damp heat, steady state (Capacitance change) | Within 20% of the initial value | Temperature: 602. Relative humidity: 90 to 95%. Duration: 1,000 +24/-0 hours. |
| Damp heat, steady state (tan) | Within 1.5 times of the value of item 2. | |
| Damp heat, steady state (ESR) | Within 1.5 times of the value of item 2. | |
| Damp heat, steady state (Leakage current) | Within the value of item 2. | (After voltage treatment) |
| Damp heat, steady state (Appearance) | No visible damage, Legible marking | |
| Surge (Capacitance change) | Within 20% of the initial value | Temperature: Room temperature. Applied voltage: 2.9 V. Protective resistor: 1 k. Cycle number: 1,000 times. (A) Charge: 305 sec. (B) Discharge: 5.5 minutes. |
| Surge (tan) | Within 1.5 times of the value of |
2201121230_Nantong-Jianghai-Capacitor-PCR0EHN821MB08LL35WP_C2918299.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
