<
>
Specifications
Voltage Rating:
2.5V
Capacitance:
820uF
Lifetime:
-
Tolerance:
±20%
Pin Spacing:
-
Equivalent Series Resistance(ESR):
-
Height - Seated (Max):
8mm
Operating Temperature:
-55℃~+105℃
Ripple Current:
-
Diameter:
6.3mm
Mfr. Part #:
PCR0EEL821MF08CC33WP
Package:
Through Hole,D6.3xL8mm
Key Attributes
Model Number:
PCR0EEL821MF08CC33WP
Product Description
Product Overview
This specification applies to the HEL series aluminum electrolytic capacitors with conductive polymer solid electrolyte. These capacitors are designed for various applications requiring stable and reliable performance.
Product Attributes
- Brand: Nantong Jianghai Capacitor Co., Ltd.
- Origin: China
- Product Type: Aluminium electrolytic capacitors with conductive polymer solid electrolyte
- Product Series: HEL Series
- Marking Color: Red (default, can be adjusted per customer request)
Technical Specifications
| Item | Rated voltage (V) | Rated capacitance (F) | Case size | DF (%) 20 120Hz | LC (A) 20 2min | ESR value (m) 100kHz | RC ripple value (mArms) | Lifespan (h) |
| 1 | 10 | 470 | 6.3*8 | 10 | 940 | 12 | 4100 | 2000 |
| 2 | 16 | 100 | 6.3*8 | 10 | 500 | 15 | 4680 | 2000 |
| 3 | 16 | 100 | 5*8 | 10 | 500 | 15 | 3000 | 2000 |
| 4 | 16 | 470 | 6.3*11.5 | 12 | 1504 | 15 | 3600 | 2000 |
| 5 | 2.5 | 1200 | 6.3*8 | 10 | 600 | 7 | 5600 | 2000 |
| 6 | 2.5 | 560 | 6.3*9 | 10 | 500 | 10 | 5600 | 2000 |
| 7 | 2.5 | 820 | 6.3*8 | 10 | 500 | 7 | 5600 | 2000 |
| 8 | 2.5 | 820 | 6.3*8 | 10 | 500 | 7 | 5600 | 2000 |
| 9 | 6.3 | 1000 | 6.3*11 | 10 | 1260 | 8 | 5000 | 2000 |
| 10 | 6.3 | 270 | 5*8 | 10 | 340.2 | 11 | 3700 | 2000 |
| 11 | 6.3 | 560 | 6.3*9 | 10 | 705.6 | 10 | 5000 | 2000 |
| 12 | 6.3 | 560 | 6.3*8 | 10 | 705.6 | 10 | 5000 | 2000 |
| Item | Characteristic | Test Method |
| 1 | Leakage current | See specifications list. Series resistor: 1,000 . Applied rated voltage 2 minutes. Voltage treatment: The capacitor should be serially attached to a protective 1,000 resistor and d.c. voltage equivalent to the rated voltage should be applied for 2h at 105 2. Next, after letting the capacitor cool to room temperature, it should be discharged through a resistor of approximately 1 /V and then stored at standard atmospheric conditions for 12 h to 24 h. |
| 2 | Capacitance | See specifications list. Measuring circuit: Equivalent series circuit. Frequency: 120 Hz10%. Measuring voltage: 0.5 Vrms. |
| 3 | Tangent of loss angle (tan) | See specifications list. Measuring temperature: 202. |
| 4 | Equivalent Series Resistance (ESR) | See specifications list. Frequency: 100 kHz10%. Measuring voltage: 0.5Vrms, Measuring temperature: 202. |
| 5 | Solderability | At least 95% of circumferential surface of the dipped portion of termination shall be covered with new solder. Flux: Rosin // Ethanol, About 25 wt%. Solder: Sn-Ag-Cu. Temperature: 2453. Duration: 20.3 seconds. |
| 6 | Robustness of terminations Appearance | No visible damage, Legible marking. Tensile Ua1: With the body of a capacitor fixed, the load shall be applied to the lead wire termination in its draw out direction, gradually up to the specified value. d (mm) | Force (N) | Time | 0.3d0.5 | 5 | 10 1 s | 0.5d0.8 | 10 | Bending Ub: Suspend a weight corresponding to bending strength, bend the body through 90and return it to the original position. Carry out these operations during 2 to 3 seconds and count it as one cycle. Carry out similar operations in the opposite direction and count it as two cycles. d (mm) | Force (N) | 0.3d0.5 | 2.5 (0.25kg) | 0.5d0.8 | 5 (0.51kg) | |
| 7 | Resistance to soldering heat Capacitance change | Within 5% of the initial value. A) Solder bath method: Temperature: 2605C, Duration: 10 1 seconds. B) Soldering iron method: Temperature: 40010C, Duration: 3+1/0 seconds. Heat protector: t=1.6 mm glass-epoxy board. Tangent of loss angle (tan): Within the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking. |
| 8 | Vibration Capacitance change | Shall not show drastic change compared to the initial capacitance when measured within 30 minutes. Frequency: 10 to 55 Hz (1 minute interval / 10 55 10 Hz). Amplitude: 0.75 mm (Total excursion 1.5 mm). Direction: X, Y, Z (3 axes). Duration: 2 hours / axial (Total 6 hour). The capacitors are supported as the following figure. Within 5% of the initial value. Tangent of loss angle (tan): Within the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking. |
| 9 | Rapid change of temperature Capacitance change | Within 10% of the initial value. Applied voltage: Without load. Cycle number: 5 cycles. Tangent of loss angle (tan): Within the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking. TA= -55 TB= 105 . |
2201121230_Nantong-Jianghai-Capacitor-PCR0EEL821MF08CC33WP_C2918265.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
