<
>
Specifications
Voltage Rating:
35V
Capacitance:
680uF
Lifetime:
-
Tolerance:
±20%
Pin Spacing:
-
Equivalent Series Resistance(ESR):
-
Height - Seated (Max):
16mm
Operating Temperature:
-55℃~+105℃
Ripple Current:
-
Diameter:
10mm
Mfr. Part #:
PCR1VEG681MC16LL50WP
Package:
Through Hole,D10xL16mm
Key Attributes
Model Number:
PCR1VEG681MC16LL50WP
Product Description
Product Overview
The HEG Series capacitors are conductive polymer solid aluminum electrolytic capacitors designed for various electronic applications. They offer reliable performance and are manufactured by Nantong Jianghai Capacitor Co., Ltd.
Product Attributes
- Brand: Jianghai
- Origin: China
- Product Type: Aluminium electrolytic capacitors with conductive polymer solid electrolyte
- Series: HEG Series
- Customer P/N: PCR1VEG681MC16LL50WP
- Manufacturer: Nantong Jianghai Capacitor Co., Ltd.
- Address: No.79 South Tongyang Road Pingchao Town Nantong City Jiangsu Province PR China
Technical Specifications
| Item | Specifications | Test Method |
| Rated voltage | 35 V | |
| Rated capacitance | 680 F (20, 120Hz) | |
| Case size | 10 16 | |
| Tolerance on rated capacitance | 20 % | |
| Surge voltage | 40.3 V | |
| Leakage current | 4760 A (max.) (20, After 2 minutes) | See specifications list; Protective resistor: 1,000 . Applied rated voltage 2 minutes. Voltage treatment: The capacitor should be serially attached to a protective 1,000 resistor and d.c. voltage equivalent to the rated voltage should be applied for 2h at 105 2. Next, after letting the capacitor cool to room temperature, it should be discharged through a resistor of approximately 1 /V and then stored at standard atmospheric conditions for 12 h to 24 h. |
| Tangent of loss angle (tan) | 12 % (max.) (20, 120Hz) | See specifications list; Measuring temperature: 202 |
| Equivalent series resistance (ESR) | 18 m (max.) (100 kHz) | See specifications list; Frequency: 100 kHz10%; Measuring voltage: 0.5Vrms, Measuring temperature: 202 |
| Rated ripple current | 4690 mA (105 , 100kHz) | |
| Category temperature range | -55 to 105 | |
| Lifespan | 105 , 2000 h | |
| Frequency coefficient for ripple current | Frequency: 120Hz1kHz (0.05), 1kHz10kHz (0.3), 10kHz100kHz (0.7), 100kHz500kHz (1.0) | |
| Solderability | Solder bath method; Flux: Rosin // Ethanol, About 25 wt% Sn-Ag-Cu solder; Temperature: 2453, Duration: 20.3 seconds. At least 95% of circumferential surface of the termination shall be covered with new solder. | |
| Robustness of Appearance (Lead wire strength) | Tensile Ua1: d (mm) 0.3d0.5 (5 N, 10 1 s); 0.5d0.8 (10 N, 10 1 s). Bending Ub: d (mm) 0.3d0.5 (2.5 N, 0.25kg); 0.5d0.8 (5 N, 0.51kg). No visible damage, Legible marking. | |
| Resistance to soldering heat | Capacitance change: Within 5% of initial value. Tan: Within the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking. A) Solder bath method: Temperature: 2605C, Duration: 10 1 seconds. B) Soldering iron method: Temperature: 40010C, Duration: 3+1/0 seconds. Heat protector: t=1.6 mm glass-epoxy board. | |
| Vibration | Frequency: 10 to 55 Hz (1 minute interval / 10 55 10 Hz); Amplitude: 0.75 mm (Total excursion 1.5 mm); Direction: X, Y, Z (3 axes); Duration: 2 hours / axial (Total 6 hour). Capacitance change: Within 5% of the initial value. Appearance: No visible damage, Legible marking. | |
| Rapid change of temperature | Applied voltage: Without load; Cycle number: 5 cycles. Capacitance change: Within 10% of the initial value. Tan: Within the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking. TA= -55 TB= 105 | |
| Shelf Life | Temperature: 105 2; Time: 1000+36 hours. Voltage treatment: The DC rated voltage shall be applied across the capacitor and its protective resistor (1K) for 30 minutes. The capacitor shall then be stored under standard atmospheric conditions for 24 to 48 hours. Capacitance change: Within 20% of the initial value. Tan: Within 2 times of the value of item 2. Leakage current: Within the value of item 2. | |
| Endurance | Temperature: 105 2; Duration: 2000 +48/-0h; Applied voltage: Rated voltage. Capacitance change: Within 20% of the initial value. Tan: Within 1.5 times of the value of item 2. ESR: Within 1.5 times of the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking. | |
| Damp heat, steady state | Temperature: 602; Relative humidity: 90 to 95%; Duration: 1,000 +24/-0hours. Capacitance change: Within 20% of the initial value. Tan: Within 1.5 times of the value of item 2. ESR: Within 1.5 times of the value of item 2. Leakage current: Within the value of item 2. (After voltage treatment). Appearance: No visible damage, Legible marking. | |
| Surge | Temperature: Room temperature; Applied voltage: 40.3 V; Protective resistor: 1 k; Cycle number: 1,000 times. Capacitance change: Within 20% of the initial value. Tan: Within 1.5 times of the value of item 2. (A) Charging: 305 seconds (B) Discharging: 5.5 minutes. |
2201121230_Nantong-Jianghai-Capacitor-PCR1VEG681MC16LL50WP_C2918333.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
