<
>
Specifications
Voltage Rating:
16V
Capacitance:
270uF
Lifetime:
-
Tolerance:
±20%
Pin Spacing:
-
Equivalent Series Resistance(ESR):
-
Height - Seated (Max):
8mm
Operating Temperature:
-55℃~+105℃
Diameter:
8mm
Ripple Current:
-
Mfr. Part #:
PCR1CCN271MB08CC35WP
Package:
Through Hole,D8xL8mm
Key Attributes
Model Number:
PCR1CCN271MB08CC35WP
Product Description
Product Overview
, HCN , 16 V, 270 F,
Product Attributes
- Brand: (Jianghai)
- Origin: (China)
- Product Type: (Aluminium electrolytic capacitors with conductive polymer solid electrolyte)
- Series: HCN Series
- Color: Red (default, adjustable per customer demand)
Technical Specifications
| Item | Specifications | Test Method |
| Rated voltage | 16 V | |
| Rated capacitance | 270 F | 20,120Hz |
| Case size | 8 8 | |
| Tolerance on rated capacitance | 20 % | |
| Surge voltage | 18.4 V | |
| Leakage current | 864 A (max.) | 20, After 2 minutes |
| Tangent of loss angle (tan) | 12 % (max.) | 20,120Hz |
| Equivalent series resistance (ESR) | 16 m (max.) | 100 kHz |
| Rated ripple current | 4000 mA | 105 , 100kHz |
| Category temperature range | -55 to 105 | |
| Lifespan | 105 , 2000 h | |
| Frequency coefficient for ripple current | 120Hz1kHz: 0.05; 1kHz10kHz: 0.3; 10kHz100kHz: 0.7; 100kHz500kHz: 1.0 | |
| Leakage current | See specifications list | Series resistor: 1,000 ; Applied rated voltage 2 minutes. Voltage treatment: Applied rated voltage for 2h at 105 2; stored at standard atmospheric conditions for 12 h to 24 h. |
| Capacitance | See specifications list | Measuring circuit: Equivalent series circuit; Frequency: 120 Hz10%; Measuring voltage: 0.5 Vrms |
| Tangent of loss angle (tan) | See specifications list | Measuring temperature: 202 |
| Equivalent Series Resistance (ESR) | See specifications list | Frequency: 100 kHz10%; Measuring voltage: 0.5Vrms, Measuring temperature: 202 |
| Solderability | At least 95% of circumferential surface of the dipped portion of termination shall be covered with new solder. | Solder bath method; Flux: Rosin // Ethanol, About 25 wt%; Solder: Sn-Ag-Cu; Temperature: 2453; Duration: 30.3 seconds |
| Robustness of Appearance (Lead wire strength) | No visible damage, Legible marking | Tensile Ua1: 0.3d0.5: 5 N, 10 1 s; 0.5d0.8: 10 N, 10 1 s. Bending Ub: 0.3d0.5: 2.5 N (0.25kg); 0.5d0.8: 5 N (0.51kg) |
| Resistance to soldering heat | Capacitance change: Within 5% of initial value; tan: Within the value of item 2; Leakage current: Within the value of item 2. | A) Solder bath method: Temperature: 2605C, Duration: 10 1 seconds; B) Soldering iron method: Temperature: 40010C, Duration: 3+1/0 seconds. Heat protector: t=1.6 mm glass-epoxy board. |
| Vibration | Capacitance change: Within 5% of initial value; Appearance: No visible damage, Legible marking | Frequency: 10 to 55 Hz (1 minute interval / 10 55 10 Hz); Amplitude: 0.75 mm (Total excursion 1.5 mm); Direction: X, Y, Z (3 axes); Duration: 2 hours / axial (Total 6 hour) |
| Rapid change of temperature | Capacitance change: Within 10% of initial value; tan: Within the value of item 2; Leakage current: Within the value of item 2; Appearance: No visible damage, Legible marking | TA= -55 TB= 105 ; Applied voltage: Without load; Cycle number: 5 cycles |
| Shelf Life | Capacitance change: Within 20% of initial value; tan: Within 2 times of the value of item 2; Leakage current: Within the value of item 2. | Temperature: 105 2; Duration: 1000+36 hours; Condition: DC rated voltage applied for 30 minutes with protective resistor (1K), then stored under standard atmospheric conditions for 24 48 hours. |
| Endurance | Capacitance change: Within 20% of initial value; tan: Within 1.5 times of the value of item 2; ESR: Within 1.5 times of the value of item 2; Leakage current: Within the value of item 2; Appearance: No visible damage, Legible marking | Temperature: 105 2; Duration: 2000 +48/-0h; Applied voltage: Rated voltage |
| Damp heat, steady state | Capacitance change: Within 20% of initial value; tan: Within 1.5 times of the value of item 2; ESR: Within 1.5 times of the value of item 2; Leakage current: Within the value of item 2 (After voltage treatment); Appearance: No visible damage, Legible marking | Temperature: 602; Relative humidity: 90 to 95%; Duration: 1,000 +24/-0hours |
| Surge | Capacitance change: Within 20% of initial value; tan: Within 1.5 times of the value of item 2. | Temperature: Room temperature; Applied voltage: 18.4 V; Protective resistor: 1 k; Cycle number: 1,000 times; (A) Charging: 305 seconds; (B) Discharging: 5.5 minutes. |
2201121230_Nantong-Jianghai-Capacitor-PCR1CCN271MB08CC35WP_C2918260.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
