<
>
Specifications
Voltage Rating:
10V
Capacitance:
1000uF
Lifetime:
-
Tolerance:
±20%
Pin Spacing:
-
Equivalent Series Resistance(ESR):
-
Height - Seated (Max):
12.5mm
Operating Temperature:
-55℃~+105℃
Ripple Current:
-
Diameter:
10mm
Mfr. Part #:
PCR1AEN102MCACLL50WT
Package:
Through Hole,D10xL12.5mm
Key Attributes
Model Number:
PCR1AEN102MCACLL50WT
Product Description
- HEN Series
Product Overview: This specification is applicable to the HEN series aluminum electrolytic capacitors with conductive polymer solid electrolyte. These capacitors are designed for various applications requiring reliable performance and specific electrical characteristics.
Product Attributes
- Brand: (Jianghai)
- Origin: (Nantong Jianghai Capacitor Co., Ltd.)
- Product Type: Aluminium electrolytic capacitors with conductive polymer solid electrolyte
- Series: HEN Series
- Marking Color: Red (default, adjustable per customer request)
Technical Specifications
| Item | Rated voltage (V) | Rated capacitance (F) | Case size (mm) | Jianghai Part No. | Customer Part No. | Processing Method | DF (%) 20 120Hz | LC (A) 20 2min | ESR value (m) | RC Ripple value (mArms) | Lifespan (h) |
| 1 | 10 | 680 | 8*11.5 | PCR1AEN681MBABLL35WP | / | (Long lead) | 8 | 1360 | 8 | 5650 | 2000 |
| 2 | 10 | 680 | 8*11.5 | PCR1AEN681MBABLL35WT | / | (Long lead) | 8 | 1360 | 8 | 5650 | 2000 |
| 3 | 16 | 560 | 8*11.5 | PCR1CEN561MBABLL35WP | / | (Long lead) | 12 | 1792 | 11 | 5100 | 2000 |
| 4 | 16 | 560 | 8*11.5 | PCR1CEN561MBABLL35WT | / | (Long lead) | 12 | 1792 | 11 | 5100 | 2000 |
| 5 | 10 | 1000 | 10*12.5 | PCR1AEN102MCACLL50WT | / | (Long lead) | 8 | 2000 | 8 | 6100 | 2000 |
| 6 | 16 | 270 | 8*11.5 | PCR1CEN271MBABLL35WP | / | (Long lead) | 8 | 864 | 10 | 5100 | 2000 |
Dimensions
| NO. | Code | D0.5 (mm) | L (mm) | max () | F0.5 (mm) | d0.05 (mm) |
| 1 | BAB | 8 | 11.5 | 1.5 | 3.5 | 0.6 |
| 2 | CAC | 10 | 12.5 | 1.5 | 5 | 0.6 |
Characteristics
| Item | Characteristics | Test Method |
| 1 | Leakage current | See specifications list. Series resistor: 1,000 . Applied rated voltage 2 minutes. If this value is doubtful, performed the voltage treatment. Voltage treatment: The capacitor should be serially attached to a protective 1,000 resistor and d.c. voltage equivalent to the rated voltage should be applied for 2h at 105 2. Next, after letting the capacitor cool to room temperature, it should be discharged through a resistor of approximately 1 /V and then stored at standard atmospheric conditions for 12 h to 24 h. |
| 2 | Capacitance | See specifications list. Measuring circuit: Equivalent series circuit. Frequency: 120 Hz10%. Measuring voltage: 0.5 Vrms. |
| 3 | Tangent of loss angle (tan) | See specifications list. Measuring temperature: 202. |
| 4 | Equivalent Series Resistance (ESR) | See specifications list. Frequency: 100 kHz10%. Measuring voltage: 0.5Vrms, Measuring temperature: 202. |
| 5 | Solderability | At least 95% of circumferential surface of the dipped portion of termination shall be covered with new solder. Flux: Rosin // Ethanol, About 25 wt%. Solder bath method: 2453 for Sn-Ag-Cu solder. Duration: 20.3 seconds. |
| 6 | Robustness of terminations | Appearance: No visible damage, Legible marking. Tensile Ua1: Applied gradually up to the specified value. Bending Ub: Suspend a weight corresponding to bending strength, bend the body through 90 and return it to the original position. Carry out these operations during 2 to 3 seconds and count it as one cycle. Carry out similar operations in the opposite direction and count it as two cycles. |
| 7 | Resistance to soldering heat | Capacitance change: Within 5% of the initial value. Tangent of loss angle (tan): Within the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking. A) Solder bath method: Temperature: 2605C, Duration: 10 1 seconds. B) Soldering iron method: Temperature: 40010C, Duration: 3+1/0 seconds. Heat protector: t=1.6 mm glass-epoxy board. |
| 8 | Vibration | Capacitance: Capacitance value shall not show drastic change compared to the initial capacitance when the value is measured within 30 minutes. Capacitance change: Within 5% of the initial value. Appearance: No visible damage, Legible marking. Frequency: 10 to 55 Hz (1 minute interval / 10 55 10 Hz). Amplitude: 0.75 mm (Total excursion 1.5 mm). Direction: X, Y, Z (3 axes). Duration: 2 hours / axial (Total 6 hours). The capacitors are supported as the following figure. |
| 9 | Rapid change of temperature | Capacitance change: Within 10% of the initial value. Tangent of loss angle (tan): Within the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking. Applied voltage: Without load. Cycle number: 5 cycles. TA= -55 TB= 105 . |
| 10 | Shelf Life | Capacitance change: Within 20% of the initial value. Tangent of loss angle (tan): Within 2 times of the value of item 2. Leakage current: Within the value of item 2. Condition: The DC rated voltage shall be applied across the capacitor and its protective resistor (1K) for 30 minutes. The capacitor shall then be stored under standard Atmospheric conditions for 24 48 hours. Temperature: 105 2. Time: 1000+36 hours. |
| 11 | Endurance | Capacitance change: Within 20% of the initial value. Tangent of loss angle (tan): Within 1.5 times of the value of item 2. Equivalent Series Resistance (ESR): Within 1.5 times of the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking. Temperature: 105 2. Duration: 2000 +48/-0h. Applied voltage: Rated voltage. |
| 12 | Damp heat, steady state | Capacitance change: Within 20% of the initial value. Tangent of loss angle (tan): Within 1.5 times of the value of item 2. Temperature: 602. Relative humidity: 90 ~ 95%. Duration: 1,000 +24/-0 hours. |
2201121230_Nantong-Jianghai-Capacitor-PCR1AEN102MCACLL50WT_C2918334.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
