<
>
Specifications
Voltage Rating:
16V
Capacitance:
470uF
Lifetime:
-
Tolerance:
±20%
Pin Spacing:
-
Equivalent Series Resistance(ESR):
-
Height - Seated (Max):
11.5mm
Operating Temperature:
-55℃~+105℃
Ripple Current:
-
Diameter:
6.3mm
Mfr. Part #:
PCR1CEL471MF11LL25WP
Package:
Through Hole,D6.3xL11.5mm
Key Attributes
Model Number:
PCR1CEL471MF11LL25WP
Product Description
Product Overview
The HEL Series from Nantong Jianghai Capacitor Co., Ltd. are high-performance conductive polymer solid aluminum electrolytic capacitors. Designed for reliability and efficiency, these capacitors are suitable for a wide range of electronic applications requiring stable capacitance and low ESR.
Product Attributes
- Brand: Nantong Jianghai Capacitor Co., Ltd.
- Product Series: HEL Series
- Origin: China
- Product Type: Aluminium electrolytic capacitors with conductive polymer solid electrolyte
- Marking Color: Red (default, customizable)
Technical Specifications
| Rated Voltage (V) | Rated Capacitance (F) | Case Size | DF (%) 20 120Hz | LC (A) 20 2min | ESR value (m) 100kHz | RC Ripple Value (mArms) | Lifespan (h) | Jianghai Part No. | Customer Part No. | Processing Method |
| 10 | 470 | 6.3*8 | 10 | 940 | 12 | 4100 | 2000 | PCR1AEL471MF08LL25WP | JH-HEL1A471M-1 | Long lead |
| 16 | 100 | 6.3*8 | 10 | 500 | 15 | 4680 | 2000 | PCR1CEL101MF08LL25WP | JH-HEL1C101M-1 | Long lead |
| 16 | 100 | 5*8 | 10 | 500 | 15 | 3000 | 2000 | PCR1CEL101ME08LL20WP | JH-HEL1C101M-2 | Long lead |
| 16 | 470 | 6.3*11.5 | 12 | 1504 | 15 | 3600 | 2000 | PCR1CEL471MF11LL25WP | JH-HEL1C471M-1 | Long lead |
| 2.5 | 1200 | 6.3*8 | 10 | 600 | 7 | 5600 | 2000 | PCR0EEL122MF08CC32WP | JH-HEL0E122M-1 | Cut lead CC3.2 |
| 2.5 | 560 | 6.3*9 | 10 | 500 | 10 | 5600 | 2000 | PCR0EEL561MF09CC25WP | JH-HEL0E561M-1 | Cut lead CC2.5 |
| 2.5 | 820 | 6.3*8 | 10 | 500 | 7 | 5600 | 2000 | PCR0EEL821MF08CC32WP | JH-HEL0E821M-1 | Cut lead CC3.2 |
| 2.5 | 820 | 6.3*8 | 10 | 500 | 7 | 5600 | 2000 | PCR0EEL821MF08CC33WP | JH-HEL0E821M-2 | Cut lead CC3.3 |
| 6.3 | 1000 | 6.3*11 | 10 | 1260 | 8 | 5000 | 2000 | PCR0JEL102MF11CC33WP | JH-HEL0J102M-1 | Cut lead CC3.3 |
| 6.3 | 270 | 5*8 | 10 | 340.2 | 11 | 3700 | 2000 | PCR0JEL271ME08FA20WP | JH-HEL0J271M-1 | Taping FA2.0 |
| 6.3 | 560 | 6.3*9 | 10 | 705.6 | 10 | 5000 | 2000 | PCR0JEL561MF09FA25WP | JH-HEL0J561M-1 | Taping FA2.5 |
| 6.3 | 560 | 6.3*8 | 10 | 705.6 | 10 | 5000 | 2000 | PCR0JEL561MF08CC33WP | JH-HEL0J561M-2 | Cut lead CC3.3 |
| Item | Specifications | Test Method |
| Rated voltage | 2.5~16 V | |
| Rated capacitance | 100~1200 F (20,120Hz) | |
| Tolerance on rated capacitance | 20 % | |
| Surge voltage | UR 1.15 | |
| Leakage current | See specifications list (20, After 2 minutes) | Series resistor: 1,000 Applied rated voltage 2 minutes. If this value is doubtful, performed the voltage treatment. Voltage treatment: The capacitor should be serially attached to a protective 1,000 resistor and d.c. voltage equivalent to the rated voltage should be applied for 2h at 105 2. Next, after letting the capacitor cool to room temperature, it should be discharged through a resistor of approximately 1 /V and then stored at standard atmospheric conditions for 12 h to 24 h. |
| Tangent of loss angle (tan) | See specifications list (20,120Hz) | Measuring temperature: 202 |
| Equivalent Series Resistance (ESR) | See specifications list (100 kHz) | Frequency: 100 kHz10% Measuring voltage: 0.5Vrms, Measuring temperature: 202 |
| Rated ripple current | See specifications list (105, 100 kHz) | |
| Category temperature range | -55 to 105 | |
| Lifespan | 105 , 2000 h | |
| Solderability | At least 95% of circumferential surface of the dipped portion of termination shall be covered with new solder. Flux: Rosin // Ethanol, About 25 wt% Sn-Ag-Cu solder Temperature: 2453 for Duration: 20.3 seconds | Solder bath method |
| Robustness of terminations (Tensile) | See table | With the body of a capacitor fixed, the load shall be applied to the lead wire termination in its draw out direction, gradually up to the specified value. |
| Robustness of terminations (Bending) | See table | Suspend a weight corresponding to bending strength, bend the body through 90and return it to the original position. Carry out these operations during 2 to 3 seconds and count it as one cycle.Carry out similar operations in the opposite direction and count it as two cycles. |
| Resistance to soldering heat | Capacitance change: Within 5% of the initial value. Tan: Within the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking. | A) Solder bath method Temperature: 2605C, Duration: 10 1 seconds B) Soldering iron method Temperature: 40010C, Duration: 3+1/0 seconds Heat protector: t=1.6 mm glass-epoxy board. |
| Vibration | Capacitance change: Within 5% of the initial value. Tan: Within the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking. | Frequency: 10 to 55 Hz (1 minute interval / 10 55 10 Hz) Amplitude: 0.75 mm (Total excursion 1.5 mm) Direction: X, Y, Z (3 axes) Duration: 2 hours / axial (Total 6 hour) |
| Rapid change of temperature | Capacitance change: Within 10% of the initial value. Tan: Within the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking. | Applied voltage: Without load Cycle number: 5 cycles TA= -55 TB= 105 |
2201121230_Nantong-Jianghai-Capacitor-PCR1CEL471MF11LL25WP_C2918273.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
