<
>
Specifications
Voltage Rating:
25V
Capacitance:
1000uF
Lifetime:
-
Tolerance:
±20%
Pin Spacing:
-
Height - Seated (Max):
14mm
Equivalent Series Resistance(ESR):
-
Operating Temperature:
-55℃~+105℃
Ripple Current:
-
Diameter:
10mm
Mfr. Part #:
PCR1EEG102MC14LL50WP
Package:
Through Hole,D10xL14mm
Key Attributes
Model Number:
PCR1EEG102MC14LL50WP
Product Description
Product Overview
The HEG Series conductive polymer solid aluminum electrolytic capacitors are designed for reliable performance in various electronic applications. These capacitors offer stable electrical characteristics and a wide operating temperature range, making them suitable for demanding environments.
Product Attributes
- Brand: Jianghai
- Origin: Nantong Jianghai Capacitor Co., Ltd.
- Product Type: Aluminium electrolytic capacitors with conductive polymer solid electrolyte
- Series: HEG Series
- Marking Color: Red (customizable upon request)
Technical Specifications
| Item | Specifications | Test Method |
| Rated voltage | 25 V | |
| Rated capacitance | 1000 F | 20, 120Hz |
| Case size | 10 14 | |
| Tolerance on rated capacitance | 20 % | |
| Surge voltage | 28.8 V | |
| Leakage current | 5000 A (max.) | 20, After 2 minutes |
| Tangent of loss angle (tan) | 12 % (max.) | 20, 120Hz |
| Equivalent series resistance (ESR) | 14 m (max.) | 100 kHz |
| Rated ripple current | 5100 mA | 105 , 100kHz |
| Category temperature range | -55 to 105 | |
| Lifespan | 105 , 2000 h | |
| Frequency coefficient for ripple current | See table below | |
| Frequency | 120Hz1kHz | 0.05 |
| Frequency | 1kHz10kHz | 0.3 |
| Frequency | 10kHz100kHz | 0.7 |
| Frequency | 100kHz500kHz | 1.0 |
| Dimensions (Unit: mm) | D0.5: 10, L: 14, max: 2, F0.5: 5, d0.05: 0.6 | C14 |
| Solderability | At least 95% of circumferential surface of the termination shall be covered with new solder. | Solder bath method, Flux: Rosin // Ethanol, About 25 wt%, 2453 for Sn-Ag-Cu solder, Duration: 20.3 seconds |
| Robustness of Appearance | No visible damage, Legible marking | Tensile Ua1: See table below; Bending Ub: See table below |
| Resistance to soldering heat | Capacitance change: Within 5% of initial value; Tan: Within the value of item 2; Leakage current: Within the value of item 2. | A) Solder bath method, Temperature: 2605C, Duration: 10 1 seconds; B) Soldering iron method, Temperature: 40010C, Duration: 3+1/0 seconds |
| Vibration | Capacitance value shall not show drastic change compared to the initial capacitance. Capacitance change: Within 5% of the initial value. | Frequency: 10 to 55 Hz (1 minute interval / 10 55 10 Hz), Amplitude: 0.75 mm (Total excursion 1.5 mm), Direction: X, Y, Z (3 axes), Duration: 2 hours / axial (Total 6 hours) |
| Rapid change of temperature | Capacitance change: Within 10% of the initial value. Tan: Within the value of item 2. Leakage current: Within the value of item 2. | Applied voltage: Without load, Cycle number: 5 cycles |
| Shelf Life | Capacitance change: Within 20% of the initial value. Tan: Within 2 times of the value of item 2. Leakage current: Within the value of item 2. | Temperature: 105 2, Duration: 1000+36 hours |
| Endurance | Capacitance change: Within 20% of the initial value. Tan: Within 1.5 times of the value of item 2. ESR: Within 1.5 times of the value of item 2. Leakage current: Within the value of item 2. | Temperature: 105 2, Duration: 2000 +48/-0h, Applied voltage: Rated voltage |
| Damp heat, steady state | Capacitance change: Within 20% of the initial value. Tan: Within 1.5 times of the value of item 2. ESR: Within 1.5 times of the value of item 2. Leakage current: Within the value of item 2. (After voltage treatment) | Temperature: 602, Relative humidity: 90 to 95%, Duration: 1,000 +24/-0hours |
| Surge | Capacitance change: Within 20% of the initial value. Tan: Within 1.5 times of the value of item 2. | Temperature: Room temperature, Applied voltage: 28.8 V, Protective resistor: 1 k, Cycle number: 1,000 times (A) Charging: 305 seconds, (B) Discharging: 5.5 minutes |
2201121230_Nantong-Jianghai-Capacitor-PCR1EEG102MC14LL50WP_C2918303.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
