<
>
Specifications
Operating Temperature:
-55℃~+85℃
Nominal Capacitance:
22nF
Voltage Rating:
16V
Tolerance:
±20%
DC Resistance(DCR):
40mΩ
Current Rating:
1A
Mfr. Part #:
NFM15CC223C1C3D
Package:
0402
Key Attributes
Model Number:
NFM15CC223C1C3D
Product Description
Product Overview
The NFM15CC223C1C3 is a 3 Terminals Low ESL Chip Multilayer Ceramic Capacitor (EMIFIL) designed for general electronic equipment. It offers low ESL and is suitable for general-purpose applications.
Product Attributes
- Brand: MURATA
- Part Number System: NFM15CC223C1C3
- Packaging: 180mm Reel PAPER W8P2, 10000 pcs./Reel
Technical Specifications
| Item | Specification | Test Method |
|---|---|---|
| Nominal Capacitance | 22000 pF | Frequency : 1.00.1kHz (Cap.) Voltage : 1V0.2V(rms) |
| Capacitance Tolerance | 20 % | Rated Voltage Time : 2 minutes max. |
| DC Rated Voltage | 16 V | Test Voltage : Rated Voltage x 300% Time : 1 to 5 s Charge Current : 50 mA max. |
| Rated Current (DC) | 1A | Measured with 100mA max. |
| DC Resistance | 40mmax. | Products shall not be damaged. |
| Insulation Resistance (I.R.) | 1000Mmin. | JEMCPS-02207C |
| Operating /Storage Temp. Range | -55 to 85 C | Ordinary Temp. / 15 C to 35 C Humidity: Ordinary Humidity / 25 %(RH) to 85 %(RH) Atmospheric pressure: 86 kPa to 106 kPa |
| Dimensions (L x W x T) | 1.00.1 x 0.50.2 x 0.40.1 mm | Using calipers. |
| Taping Dimensions (e.g., for NFM15CC series) | A: 0.72* (typical), B: 1.29* (typical), t: 0.9 max. | *typical |
| Packaging Unit | 10000 pcs./Reel | Standard quantity |
| Solderability | Electrodes shall be at least 90% covered with new solder coating. | Sn-3.0Ag-0.5Cu, Solder Temp: 240 3C, Immersion Time: 31 s |
| Resistance to soldering heat | Appearance No damaged, Cap. Change Within 7.5%, DC Resistance 0.05 max. | Sn-3.0Ag-0.5Cu, Solder Temp: 270 5C, Immersion Time: 10 1 s |
| Bending Strength | Deflection: 1.0 mm | Soldered on glass-epoxy substrate (100400.8mm) |
| Drop Test | Height: 1m | Dropped on concrete or steel board, Free fall, 3 directions |
| Bonding Strength | Applying Force (F): 5 N | Soldered on glass-epoxy substrate |
| Vibration Test | Frequency: 10 to 2000 to 10Hz (20 min) | Total amplitude 3.0 mm or Acceleration 196m/s, 2 hours per direction (3 directions) |
| Temperature Cycling | 10 cycles | Min Op. Temp to Max Op. Temp |
| Humidity Test | 500+24 / -0 hours | 402C, 90 to 95%(RH) |
| Heat Life Test | 1000+48 / -0 hours | Max Op. Temp 2 C, Rated Voltage x 150% |
2411220228_muRata-NFM15CC223C1C3D_C2650871.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
