<
>
Specifications
Operating Temperature:
-55℃~+125℃
Nominal Capacitance:
22nF
Voltage Rating:
50V
Tolerance:
-20%~+50%
DC Resistance(DCR):
300mΩ
Current Rating:
300mA
Mfr. Part #:
NFM3DCC223R1H3L
Package:
1205
Key Attributes
Model Number:
NFM3DCC223R1H3L
Product Description
NFM3DCC223R1H3_
This product specification applies to the Chip EMIFIL Chip 3-terminal Capacitor, designed for general electronic equipment. It offers reliable performance with specific electrical, mechanical, and environmental characteristics.
Product Attributes
- Brand: MURATA
- Part Number System: NFM 3D CC 223 R 1H 3 L
- Packaging Code: L
- Reference Sheet: 1
Technical Specifications
| Item | Specification | Test Method |
| Nominal Capacitance | 22000 pF | Frequency (Cap.) 22 to 100pF : 1.00.1MHz, 220 to 22000pF : 1.00.1kHz, Voltage : 10.2V(rms) |
| Capacitance Tolerance | +50/-20 % | |
| DC Rated Voltage | DC 50 V | Voltage : Rated Voltage, Time : 2 minutes max. |
| Rated Current | 300mA(DC) | |
| DC Resistance | 300mmax. (Rdc1,2) | Measured with 100mA max. (Rdc1 : between signal terminals, Rdc2 : between ground terminals) |
| Insulation Resistance | 1000Mmin. | Test Voltage : 150V(DC), Time : 1 to 5 s, Charge Current : 50 mA max. |
| Operating Temperature Range | -55 to 125 C | |
| Storage Temperature Range | -55 to 125 C | |
| Dimensions (L x W x T) | 1.10.3 x 1.250.2 x 0.70.2 mm | |
| Electrode | 0.30.2 mm | |
| Packaging | 4000 pcs./Reel, 180mm Reel, EMBOSSED W8P4 | |
| Solderability | Flux: Ethanol solution of rosin, 25(wt)%, Pre-heat: 15010C, 60 to 90s, Solder: Sn-3.0Ag-0.5Cu, Solder Temperature: 240 3C, Immersion Time: 31 s | |
| Resistance to soldering heat | Flux: Ethanol solution of rosin, 25(wt)%, Pre-heat: 15010C, 60 to 90s, Solder: Sn-3.0Ag-0.5Cu, Solder Temperature: 270 5C, Immersion Time: 10 1 s | Initial values: About 220 to 22000pF, measured after heat treatment (150+0/-10 C, 1hour) and exposure in room condition for 242 hours. |
| Temperature Cycling | -55+0/-3 / 30+3/-0 min to Room Temp. / within 3 min to +125+3/-0 / 30+3/-0 min to Room Temp. / within 3 min (10 cycles) | Initial values: About 220 to 22000pF, measured after heat treatment(150+0/-10C,1hour) and exposure in room condition for 242 hours. |
| Humidity | 402C, 90 to 95%(RH), 1000+48/-0 hours | Then measured after exposure in room condition for 242 hours. |
| Heat Life | 1252C, Rated Voltage x 200%, 1000+48/-0 hours | Initial values: About 220 to 22000pF, measured after voltage treatment (1252C, Rated Voltage x 200%, 1hour) and exposure in room condition for 242 hours. |
| Cold Resistance | -552C, 500+24/-0 hours | Then measured after exposure in room condition for 242 hours. |
2410121820_muRata-NFM3DCC223R1H3L_C113156.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
