Product Overview
The Murata NFE61HT Series Chip EMIFIL LC Combined Type for Large Current is designed for automotive electronics applications, offering effective noise suppression. Based on AEC-Q200 standards, these components combine ceramic capacitor and ferrite bead functionalities to filter high-frequency noise by conducting it to ground. They are suitable for applications requiring high reliability and are designed for solder mounting.
Product Attributes
- Brand: Murata
- Product Line: EMIFIL
- Type: LC Combined Type for Large Current
- Certification: AEC-Q200
- Origin: Japan (implied by manufacturer)
Technical Specifications
| Murata Part Number | Capacitance | Capacitance Tolerance | Rated Voltage (DC) | Withstanding Voltage (DC) | Rated Current (DC) | Insulation Resistance (M min.) | ESD Rank |
|---|---|---|---|---|---|---|---|
| NFE61HT330U2A9L | 33pF | 30% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT330U2A9B | 33pF | 30% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT680R2A9L | 68pF | 30% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT680R2A9B | 68pF | 30% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT101Z2A9L | 100pF | 30% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT101Z2A9B | 100pF | 30% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT181C2A9L | 180pF | 30% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT181C2A9B | 180pF | 30% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT361C2A9L | 360pF | 20% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT361C2A9B | 360pF | 20% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT681D2A9L | 680pF | 30% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT681D2A9B | 680pF | 30% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT102F2A9L | 1000pF | 80% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT102F2A9B | 1000pF | 80% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT332Z2A9L | 3300pF | 80% | 100 V | 250 V | 2 A | 1000 | 2 |
| NFE61HT332Z2A9B | 3300pF | 80% | 100 V | 250 V | 2 A | 1000 | 2 |
Operating and Storage Conditions
| Parameter | Value |
|---|---|
| Operating Temperature | - 55 C to + 125 C |
| Storage Temperature | - 55 C to + 125 C |
Dimensions
| Parameter | Value (mm) |
|---|---|
| Length (L) | 6.8 0.3 |
| Width (W) | 1.6 0.3 |
| Height (H) | 2.6 0.3 |
| Electrode Width | 1.6 0.3 |
| Electrode Length | 1.6 0.3 |
| Termination Thickness | 0.7 0.2 |
| Gap () | 0.5 max. |
| Gap (1) | 0.1 max. |
| Mass (Typical) | 0.062g |
| Item | Specification |
|---|---|
| Capacitance Measurement Voltage | 33,68,100pF: 1 to 5 V(rms) at 1MHz10% 180,360,680,1000,3300pF: 10.2 V(rms) at 1kHz10% |
| Insulation Resistance Test Voltage | 100 V(DC) for 60 5 seconds |
| Withstanding Voltage Test Voltage | 250 V(DC) for 1 to 5 seconds |
| Resistance to Surge Voltage Peak Voltage | 400 V (exponential function, 1 s, 105 surges) |
| High Temperature Exposure (Storage) | 1000 hours at 125C |
| Temperature Cycling | 1000 cycles (-55C to 125C) |
| Biased Humidity | 1000 hours at 85C/85%RH (Max rated Voltage and current applied) |
| Operational Life | 1000 hours at 125C (Max rated Current applied) |
| Mechanical Shock | AEC-Q200 Rev.D, MIL-STD-202 Method 213, Condition F (1500g's/0.5ms/Half sine) |
| Vibration | AEC-Q200 Rev.D, 5g's for 20 minutes, 10-2000Hz |
| Resistance to Soldering Heat | 260C 5C, 10s immersion (Pre-heating: 150C 5C, 60s 5s) |
| ESD Rank | Refer to Item 3. Rating (2:2kV) |
| Board Flex | Epoxy-PCB(1.6mm), Deflection 2mm (min), 60s holding time |
| Terminal Strength | 17.7N for 60sec |
Note: For detailed specifications on Capacitance Change, Insulation Resistance, Withstanding Voltage, and other parameters after various stress tests, please refer to the original datasheet's Table A, B, and C.
2410121452_muRata-NFE61HT332Z2A9L_C113265.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
