<
>
Specifications
Nominal Capacitance:
100nF
Operating Temperature:
-55℃~+105℃
Voltage Rating:
6.3V
Tolerance:
±20%
DC Resistance(DCR):
30mΩ
Current Rating:
2A
Mfr. Part #:
NFM15PC104D0J3D
Package:
0402
Key Attributes
Model Number:
NFM15PC104D0J3D
Product Description
Product Overview
This product specification is applied to Large Current 3 Terminals Low ESL Chip Multilayer Ceramic Capacitors (EMIFIL) used for General Electronic equipment. These capacitors offer advantages such as 3 terminals, low ESL, and are suitable for general-purpose applications.
Product Attributes
- Brand: MURATA
- Part Number System: NFM15PC104D0J3
- Packaging Code: D0J3
Technical Specifications
| Item | Specification | Test Method |
| Nominal Capacitance | 0.1 uF | Frequency: 1.00.1kHz (Cap.) Voltage: 1V0.2V(rms) |
| Capacitance Tolerance | 20 % | |
| DC Rated Voltage | DC 6.3 V | |
| Rated Current | 2A(DC) | |
| DC Resistance | 30mmax. | Measured with 100mA max. |
| Insulation Resistance | 1000Mmin. | |
| Operating /Storage Temp. Range | -55 to 105 C | |
| Dimensions (L x W x T) | 1.00.1 x 0.50.2 x 0.40.1 mm | |
| Packaging | 180mm Reel PAPER W8P2, 10000 pcs./Reel | |
| Withstanding Voltage | Rated Voltage x 300% | Time: 1 to 5 s |
| Appearance | No defects or abnormalities. | Visual inspection. |
| Solderability | Electrodes shall be at least 90% covered with new solder coating. | Flux: Ethanol solution of rosin, 25(wt)%; Pre-heat: 15010C, 60 to 90s; Solder: Sn-3.0Ag-0.5Cu; Solder Temperature: 240 3C; Immersion Time: 31 s |
| Resistance to soldering heat | Appearance No damaged; Cap. Change Within 7.5%; DC Resistance 0.05 max. | Flux: Ethanol solution of rosin, 25(wt)%; Pre-heat: 15010C, 60 to 90s; Solder: Sn-3.0Ag-0.5Cu; Solder Temperature: 270 5C; Immersion Time: 10 1 s |
| Bending Strength | Deflection: 1.0 mm | It shall be soldered on the glass-epoxy substrate (100400.8mm). Keeping Time: 5 s |
| Drop | It shall be dropped on concrete or steel board. | Height: 1m; Method: Free fall; Attitude: 3 directions |
| Bonding Strength | Applying Force (F): 5 N | It shall be soldered on the glass-epoxy substrate. Applying Time: 5 s |
| Vibration | Oscillation Frequency: 10 to 2000 to 10Hz for 20 minute. | Total amplitude 3.0 mm or Acceleration amplitude 196m/s2 whichever is smaller. Time: A period of 2 hours in each of 3 mutually perpendicular directions. |
| Temperature Cycling | 1 Cycle | 1 step: Min Op. Temp +0 / -3C / 30+3 / -0 min; 2 step: Room Temp / within 3 min; 3 step: Max Op. Temp +3 / -0C / 30 +3 / -0 min; 4 step: Room Temp / within 3 min. Total of 10 cycles. |
| Humidity | Temperature: 402C; Humidity: 90 to 95%(RH); Time: 500+24 / -0 hours | |
| Heat Life | Temperature: Max Op. Temp 2 C; Test Voltage: Rated Voltage x 150%; Time: 1000+48 / -0 hours | Charge Current: 50 mA max. |
2410121930_muRata-NFM15PC104D0J3D_C2650904.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
