<
>
Specifications
Operating Temperature:
-55℃~+125℃
Nominal Capacitance:
470nF
Voltage Rating:
6.3V
Tolerance:
±20%
DC Resistance(DCR):
30mΩ
Current Rating:
2A
Mfr. Part #:
NFM18PC474R0J3D
Package:
SMD-3P,1.6x0.8mm
Key Attributes
Model Number:
NFM18PC474R0J3D
Product Description
Product Overview
NFM18PC474R0J3_ is a Large Current 3 Terminals Low ESL Chip Multilayer Ceramic Capacitor (EMIFIL) designed for general electronic equipment. It offers low ESL and is suitable for applications requiring filtering and noise suppression.
Product Attributes
- Brand: MURATA
- Packaging: 8mm-wide paper tape, 4000 pcs./Reel
Technical Specifications
| Item | Specification | Test Method |
| Nominal Capacitance | 0.47 uF | Frequency : 1.00.1kHz (Cap.) Voltage : 10.2V(rms) |
| Capacitance Tolerance | 20 % | |
| DC Rated Voltage | DC 6.3 V | |
| Rated Current | 2A(DC) | |
| DC Resistance | 30mmax. | Measured with 100mA max. |
| Insulation Resistance | 1000Mmin. | Voltage : Rated Voltage Time : 2 minutes max. |
| Operating Temp. Range | -55 to 125 C | Includes self-heating |
| Storage Temp. Range | -55 to 125 C | |
| Dimensions (L x W x T) | 1.60.1 x 0.80.1 x 0.60.1 mm | Using calipers. |
| Packaging Code | D | |
| Appearance | No defects or abnormalities. | Visual inspection. |
| Solderability | Electrodes shall be at least 90% covered with new solder coating. | Flux : Ethanol solution of rosin, 25(wt)% Pre-heat : 15010C, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 240 3C Immersion Time : 31 s |
| Resistance to soldering heat | No failure after tested. | Flux : Ethanol solution of rosin, 25(wt)% Pre-heat : 15010C, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 270 5C Immersion Time : 10 1 s |
| Bending Strength | Deflection : 2 mm Keeping Time : 30 s | Soldered on glass-epoxy substrate (100401.0mm). |
| Drop | Height : 1m Method : Free fall Attitude : 3 directions | Dropped on concrete or steel board. |
| Bonding Strength | Applying Force (F) : 9.8 N Applying Time : 10 s | Soldered on glass-epoxy substrate. |
| Vibration | Oscillation Frequency : 10 to 2000 to 10Hz for 20 minute. Total amplitude 1.5 mm or Acceleration amplitude 196m/s2 whichever is smaller. Time : A period of 2 hours in each of 3 mutually perpendicular directions. (Total 6 hours) | Soldered on glass-epoxy substrate. Preconditioning : Heat treatment (150+0 / -10 C,1hour) |
| Temperature Cycling | 10 cycles | -55+0 / -3C (30+3 / -0 min) -> Room Temp. (within 3 min) -> Max Operating Temp. +3 / -0C (30 +3 / -0 min) -> Room Temp. (within 3 min) |
| Humidity | 500+24 / -0 hours | Temperature : 402C Humidity : 90 to 95%(RH) |
| Heat Life | 1000+48 / -0 hours | Temperature : Maximum Operating Temperature 2 C Test Voltage : Rated Voltage x 200% Charge Current : 50 mA max. |
2410121715_muRata-NFM18PC474R0J3D_C478452.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
