<
>
Specifications
Operating Temperature:
-55℃~+85℃
Nominal Capacitance:
4.3uF
Voltage Rating:
4V
Tolerance:
±20%
DC Resistance(DCR):
30mΩ
Current Rating:
2A
Mfr. Part #:
NFM15PC435R0G3D
Package:
SMD-4P,1x0.5mm
Key Attributes
Model Number:
NFM15PC435R0G3D
Product Description
Product Overview
This product specification is applied to Large Current 3 Terminals Low ESL Chip Multilayer Ceramic Capacitors (EMIFIL) used for General Electronic equipment. These capacitors offer low ESL and are designed for general-purpose applications, featuring a 3-terminal construction.
Product Attributes
- Brand: MURATA
- Packaging Code: R0G3
- Reference Sheet: NFM15PC435R0G3_(0402, 4.3uF, DC4V)
Technical Specifications
| Item | Specification | Test Method |
| Nominal Capacitance | 4.3 uF | Frequency: 1.00.1kHz (Cap.) Voltage: 0.5V0.1V(rms) |
| Capacitance Tolerance | ±20 % | |
| DC Rated Voltage | 4 V | |
| Rated Current | 2A(DC) | |
| DC Resistance | 30mΩmax. | Measured with 100mA max. |
| Insulation Resistance | 25MΩmin. | Voltage: Rated Voltage x 300% Time: 2 minutes max. |
| Operating Temperature Range | -55 to 85 °C | Includes self-heating |
| Storage Temperature Range | -55 to 85 °C | |
| Dimensions (L x W x T) | 1.00.1 x 0.50.2 x 0.40.1 mm | |
| Packaging | 180mm Reel PAPER W8P2 10000 pcs./Reel | |
| Appearance | No defects or abnormalities. | Visual inspection. |
| Solderability | Electrodes shall be at least 90% covered with new solder coating. | Flux: Ethanol solution of rosin, 25(wt)% Pre-heat: 150±10°C, 60 to 90s Solder: Sn-3.0Ag-0.5Cu Solder Temperature: 240 ± 3°C Immersion Time: 3±1 s Immersion and emersion rates: 25mm / s |
| Resistance to soldering heat | Appearance No damaged Cap. Change Within ±7.5% DC Resistance 0.05Ω max. | Flux: Ethanol solution of rosin, 25(wt)% Pre-heat: 150±10°C, 60 to 90s Solder: Sn-3.0Ag-0.5Cu Solder Temperature: 270 ± 5°C Immersion Time: 10 ± 1 s Immersion and emersion rates: 25mm / s |
| Bending Strength | Appearance No damaged Cap. Change Within ±7.5% I.R. Meet the initial rated value. DC Resistance 0.05Ω max. | It shall be soldered on the glass-epoxy substrate. (100×40×0.8mm). Deflection: 1.0 mm Keeping Time: 5 s |
| Drop | Appearance No damaged Capacitance Meet the initial rated value. DC Resistance 0.05Ω max. | It shall be dropped on concrete or steel board. Height: 1m Method: Free fall Attitude from which the product is dropped: 3 directions |
| Bonding Strength | Appearance No damaged Cap. Change Within ±7.5% I.R. Meet the initial rated value. DC Resistance 0.05Ω max. | It shall be soldered on the glass-epoxy substrate. Applying Force (F): 5 N Applying Time: 5 s |
| Vibration | Appearance No damaged Cap. Change Within ±7.5% I.R. Meet the initial rated value. DC Resistance 0.05Ω max. | It shall be soldered on the glass-epoxy substrate. Oscillation Frequency: 10 to 2000 to 10Hz for 20 minute. Total amplitude 3.0 mm or Acceleration amplitude 196m/s2 whichever is smaller. Time: A period of 2 hours in each of 3 mutually perpendicular directions. (Total 6 hours) |
| Temperature Cycling | Appearance No damaged Cap. Change Within ±12.5% I.R. Meet the initial rated value. DC Resistance 0.05Ω max. | 1 Cycle Temperature: Min Op. Temp. +0/-3°C / 30+3/-0 min, Room Temp. / within 3 min, Max Op. Temp. +3/-0°C / 30+3/-0 min, Room Temp. / within 3 min. Total of 10 cycles. |
| Humidity | Appearance No damaged Cap. Change Within ±12.5% I.R. Meet the initial rated value. DC Resistance 0.05Ω max. | Temperature: 40±2°C Humidity: 90 to 95%(RH) Time: 500+24/-0 hours |
| Heat Life | Appearance No damaged Cap. Change Within ±12.5% I.R. 473,104 224,474 105MΩ min. 435 5MΩ min. DC Resistance 0.05Ω max. | Temperature: Max Operating Temperature ± 2 °C Test Voltage: Rated Voltage x 100% Charge Current: 50 mA max. Time: 1000+48/-0 hours |
2410121932_muRata-NFM15PC435R0G3D_C337964.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
