<
>
Specifications
Number of Channels:
1
Resistance:
43Ω
Inductance:
10nH
Capacitance:
500pF
Operating Temperature:
-55℃~+125℃
Voltage Rating:
16V
Current Rating:
1.5mA
Filter Order:
3
Frequency - Cutoff or Center:
500MHz
ESD Protection:
No
Mfr. Part #:
NFL18ST507X1C3D
Package:
SMD-3P,1.6x0.8mm
Key Attributes
Model Number:
NFL18ST507X1C3D
Product Description
Product Overview
The NFL18ST_X Series is a Chip EMIFIL LC Combined Monolithic Type designed for noise suppression by conducting high-frequency noise elements to ground. It offers effective noise reduction when used with appropriate land dimensions and ground-plane connections.
Product Attributes
- Brand: MURATA
- Product Type: Chip EMIFIL LC Combined Monolithic Type
- Series: NFL18ST_X
- Certifications: RoHS compliant
Technical Specifications
| MURATA Part Number | Customer Part Number | Dimension (L x W) | Cut-off Frequency [MHz] | Capacitance [pF] | Inductance (L) [nH] | DC Resistance [ max.] | Rated Current [mA(DC)] | Insulation Resistance [M min.] | Rated Voltage [V(DC)] | Withstanding Voltage [V(DC)] | Packaging Code |
| NFL18ST207X1C3D | 1.6x0.8 | 200 | 2520% | 11020% | 3.5 | 150 | 1000 | 16 | 50 | D | |
| NFL18ST207X1C3B | 1.6x0.8 | 200 | 2520% | 11020% | 3.5 | 150 | 1000 | 16 | 50 | B | |
| NFL18ST307X1C3D | 1.6x0.8 | 300 | 1820% | 6220% | 1.8 | 200 | D | ||||
| NFL18ST307X1C3B | 1.6x0.8 | 300 | 1820% | 6220% | 1.8 | 200 | B | ||||
| NFL18ST507X1C3D | 1.6x0.8 | 500 | 1020% | 4320% | 1.5 | D | |||||
| NFL18ST507X1C3B | 1.6x0.8 | 500 | 1020% | 4320% | 1.5 | B |
| Item | Specification | Test Method |
| Operating Temperature | -55C to +125C (Includes self-heating.) | |
| Storage Temperature | -55C to +125C | |
| Capacitance (Cap.) | Meet item 3. Frequency : 10.1MHz Voltage : 10.2V(rms) | |
| Inductance (L) | Frequency : 101MHz Voltage : 10.2V(rms) | |
| DC Resistance (Rdc) | Meet item 3. Measured with 10mA max. Measured between terminal (1)-(3). (ref. Item5) | |
| Insulation Resistance(I.R.) | Voltage : Rated Voltage Time : 1 minutes max. | |
| Withstanding Voltage | Products shall not be damaged. Test Voltage : 50V(DC) Time : 1 to 5 s Charge Current : 50 mA max. | |
| Appearance and Dimensions | Meet item 5. | Visual Inspection and measured with Slide Calipers. |
| Solderability | Electrodes shall be at least 90% covered with new solder coating. Flux : Ethanol solution of rosin, 25(wt)% Pre-heat : 150 10C, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 240 3C Immersion Time : 31 s Immersion and emersion rates : 25mm / s | |
| Resistance to soldering heat | Meet Table 1. Flux : Ethanol solution of rosin, 25(wt)% Pre-heat : 150 10C, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 270 5C Immersion Time : 10 1 s Immersion and emersion rates : 25mm / s Then measured after exposure in the room condition for 242 hours. | |
| Bending Strength | Meet Table 2. It shall be soldered on the glass-epoxy substrate (t = 1.0mm). Deflection : 2 mm Keeping Time : 30 s | |
| Drop | Products shall be no failure after tested. It shall be dropped on concrete or steel board. Method : Free fall Height : 1m Attitude from which the product is dropped : 3 directions The Number of Time : 3 times for each direction (Total 9 times) | |
| Bonding Strength | The electrodes shall be no failure after tested. It shall be soldered on the glass-epoxy substrate. Applying Force (F) : 9.8 N Applying Time : 30 s | |
| Vibration | Meet Table 1. It shall be soldered on the glass-epoxy substrate. Oscillation Frequency : 10 to 55Hz for 1 minute Double Amplitude : 1.5 mm Time: A period of 2 hours in each of 3 mutually perpendicular directions. (Total 6 hours) | |
| Temperature Cycling | Meet Table 1. 1 Cycle 1 step : -55 0 3 C / 30 3 0 min 2 step : Room Temperature / within 3 min 3 step : +125 3 0 C / 30 3 0 min 4 step : Room Temperature / within 3 min Total of 10 cycles Then measured after exposure in the room condition for 242 hours. | |
| Humidity | Temperature : 40 2 C Humidity : 90 to 95%(RH) Time : 500 24 0 hours Then measured after exposure in the room condition for 242 hours. | |
| Heat Life | Temperature : 125 2 C Test Voltage : Rated Voltage 200% Charge Current : 50 mA max. Time : 1000 48 0 hours Then measured after exposure in the room condition for 242 hours. |
2410121543_muRata-NFL18ST507X1C3D_C140836.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
