<
>
Specifications
Mfr. Part #:
DLW21PH201XQ2L
Package:
SMD,2x1.2x1.2mm
Key Attributes
Model Number:
DLW21PH201XQ2L
Product Description
Product Overview
The Murata DLW21PHXQ2 series Chip Common Mode Choke Coil is designed for automotive electronics applications and is AEC-Q200 qualified. These coils are engineered to suppress common mode noise, ensuring reliable operation of electronic systems in demanding automotive environments.
Product Attributes
- Brand: MURATA MFG CO., LTD
- Certification: AEC-Q200
- Application: Automotive Electronics
Technical Specifications
| Murata Part Number | Common Mode Impedance () at 100 MHz | Rated Voltage (VDC) | Withstanding Voltage (VDC) | Rated Current* (mA) Ambient Temp 105C | Rated Current* (mA) Ambient Temp 125C | DC Resistance () | Insulation Resistance (M min.) | ESD Rank |
| DLW21PH201XQ2L | 20025% | 20 | 50 | 500 | 350 | 0.1420% | 10 | 5B |
| Test Item | Specification | Test Method/Conditions |
| High temperature exposure | Appearance: No damage Common mode impedance change rate: within 20% Insulation resistance: 10 M min. DC resistance change rate: within 30% | 1000 h at 125C (Set for 24 h at room condition, then measured) |
| Temperature cycling | Appearance: No damage Common mode impedance change rate: within 20% Insulation resistance: 10 M min. DC resistance change rate: within 30% | 1000 cycles -40C to +125C (Set for 24 h at room condition then measured) |
| Biased humidity | Appearance: No damage Common mode impedance change rate: within 20% Insulation resistance: 10 M min. DC resistance change rate: within 30% | 1000 h at 85C, 85% (RH). Apply max rated voltage and rated current. (Set for 24 h at room condition, then measured) |
| Operational life | Appearance: No damage Common mode impedance change rate: within 20% Insulation resistance: 10 M min. DC resistance change rate: within 30% | Apply 125C 1000 h (Set for 24 h at room condition then measured) |
| Mechanical shock | Appearance: No damage Common mode impedance change rate: within 20% Insulation resistance: 10 M min. DC resistance change rate: within 30% | Per MIL-STD-202 Method 213 Condition F: 1500 g's/0.5 ms/half sine |
| Vibration | Appearance:No damage Common mode impedance change rate: within 20% | 5 g's for 20 min, 12 cycles each of 3 orientations (Test from 10 Hz to 2000 Hz) |
| Resistance to Soldering Heat | Appearance: No damage Common mode impedance change rate: within 20% Insulation resistance: 10 M min. DC resistance change rate: within 30% | Solder temperature 260C5C, Immersion time 10 s (Deviation for AEC-Q200: Pre-heating: 150C/60s) |
| ESD | Appearance: No damage Common mode impedance change rate: within 20% Insulation resistance: 10 M min. DC resistance change rate: within 30% | ESD Rank: Refer to chapter 3 (Per AEC-Q200-002) |
| Solderability | 95% or more of the outer electrode shall be covered with new solder seamlessly. (except exposed wire) | Per J-STD-002 (Deviation for AEC-Q200: Method b: Not applicable, Pre-heating: 150C/60s) |
| Board Flex | Appearance:No damage Common mode impedance change rate: within 20% | Deflection 2 mm (min.) 60 s minimum holding time (Deviation for AEC-Q200: Epoxy-PCB thickness: 1.0 mm) |
| Terminal Strength | Appearance: No damage | A force of 17.7 N for 60 s (Deviation for AEC-Q200: Applying force: 10 N) |
2411220011_muRata-DLW21PH201XQ2L_C3010447.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
