<
>
Specifications
Nominal Capacitance:
27uF
Operating Temperature:
-40℃~+85℃
Voltage Rating:
6.3V
Tolerance:
±20%
DC Resistance(DCR):
5mΩ
Current Rating:
6A
Mfr. Part #:
NFM31PC276B0J3L
Package:
SMD-4P,3.2x1.6mm
Key Attributes
Model Number:
NFM31PC276B0J3L
Product Description
Product Overview
The NFM31PC276B0J3 is a Large Current 3 Terminals Low ESL Chip Multilayer Ceramic Capacitor (EMIFIL) designed for general electronic equipment. It offers advantages such as low ESL and suitability for high current applications.
Product Attributes
- Brand: MURATA
- Product Type: Chip Multilayer Ceramic Capacitors (EMIFIL)
- Series: NFM31
- Packaging: 180mm Reel (EMBOSSED W8P4, 3000 pcs./Reel)
Technical Specifications
| Item | Specification | Test Method |
| Nominal Capacitance | 27 uF | Frequency: 120Hz, Voltage: 0.50.1V(rms) |
| Capacitance Tolerance | 20 % | |
| DC Rated Voltage | DC 6.3 V | |
| Rated Current | 6A(DC) | |
| DC Resistance | 5mmax. | Measured with 100mA max. |
| Insulation Resistance | 20Mmin. | Voltage: Rated Voltage x 300%, Time: 1 to 5 s |
| Operating Temp. Range | -40 to 85 C | Includes self-heating |
| Storage Temp. Range | -40 to 85 C | |
| Dimensions (L x W x T) | 3.20.2 x 1.60.2 x 1.30.2 mm | |
| Dimensions (e) | 0.40.3 mm | |
| Dimensions (f) | 0.3 min. | |
| Dimensions (g) | 1.10.3 mm | |
| Dimensions (j) | 0.30.2 mm | |
| Appearance | No defects or abnormalities. | Visual inspection. |
| Solderability | Electrodes shall be at least 90% covered with new solder coating. Products shall be no failure after tested. | Flux: Ethanol solution of rosin, 25(wt)%, Pre-heat: 150 10C, 60 to 90s, Solder: Sn-3.0Ag-0.5Cu, Solder Temperature: 240 3C, Immersion Time: 3 1 s |
| Resistance to soldering heat | Appearance: No damaged, Cap. Change: Within 7.5%, DC Resistance: 0.05 max. | Flux: Ethanol solution of rosin, 25(wt)%, Pre-heat: 15010C, 60 to 90s, Solder: Sn-3.0Ag-0.5Cu, Solder Temperature: 270 5C, Immersion Time: 10 1 s |
| Bending Strength | Appearance: No damaged, Cap. Change: Within 7.5%, DC Resistance: 0.05 max. | Soldered on glass-epoxy substrate (100 x 40 x 1.0 mm), Deflection: 2 mm, Keeping Time: 30 s |
| Drop | Appearance: No damaged, Capacitance: Meet the initial rated value., DC Resistance: 0.05 max. | Dropped on concrete or steel board, Height: 1m, Attitude: 3 directions |
| Bonding Strength | The electrodes shall be no failure after tested. | Soldered on glass-epoxy substrate, Applying Force (F): 9.8 N, Applying Time: 30 s |
| Vibration | Appearance: No damaged, Cap. Change: Within 7.5%, DC Resistance: 0.05 max. | Soldered on glass-epoxy substrate, Oscillation Frequency: 10 to 55 to 10Hz for 1 minute, Double Amplitude: 1.5 mm, Time: 2 hours in each of 3 mutually perpendicular directions. |
| Temperature Cycling | Appearance: No damaged, Cap. Change: Within 12.5%, I.R.: 50min, DC Resistance: 0.05 max. | 10 cycles of temp. change from -40C to +85C |
| Humidity | Appearance: No damaged, Cap. Change: Within 12.5%, I.R.: 50min, DC Resistance: 0.05 max. | 40 2 C, 90 to 95%(RH), 500+24 / -0 hours |
| Heat Life | Appearance: No damaged, Cap. Change: Within 12.5%, I.R.: 50min, DC Resistance: 0.05 max. | Maximum Operating Temperature2C, Test Voltage: Rated Voltage150%, Time: 1000+48 / -0 hours |
2410121921_muRata-NFM31PC276B0J3L_C118987.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
