<
>
Specifications
Attenuation Value:
35dB@1MHz~1GHz
Number of Channels:
2
Capacitance:
1uF
Operating Temperature:
-40℃~+125℃
Voltage Rating:
100V
Current Rating:
20A
Filter Order:
5
ESD Protection:
No
Mfr. Part #:
BNX023-01L
Package:
SMD-4P,12.1x9.1mm
Key Attributes
Model Number:
BNX023-01L
Product Description
SMD Block Type EMIFIL BNX02-01
This reference specification applies to the SMD Block Type EMIFIL, designed for noise suppression applications. These filters offer effective EMI reduction across a wide frequency range, making them suitable for various electronic circuits requiring clean signal integrity.
Product Attributes
- Brand: MURATA MFG.CO.,LTD.
- Type: SMD Block Type EMIFIL
Technical Specifications
| Part Number | Capacitance | Rated Voltage (DC) | Withstanding Voltage (DC) | Rated Current (DC) | DC Resistance | Insulation Resistance | Insertion Loss | Voltage Drop | Operating Temperature | Storage Temperature |
|---|---|---|---|---|---|---|---|---|---|---|
| BNX022-01L BNX022-01K BNX022-01B | 1.0F15% | 50V | 125V | 20A | 0.43m 0.20m | 500M min. | 35dB min. (1MHz to 1GHz) | 30 mV max. | -40 C to +125 C | -55 C to +125 C |
| BNX023-01L BNX023-01K BNX023-01B | 1.0F15% | 100V | 250V | 20A | 0.43m 0.20m | 500M min. | 35dB min. (1MHz to 1GHz) | 45mV max. | -40 C to +125 C | -55 C to +125 C |
| BNX028-01L BNX028-01K BNX028-01B | 47F20 50% | 16V | 40V | 20A | 0.43m 0.20m | 1.1M min. | 35dB min. (30KHz 1GHz) | 45mV max. | -40 C to +105 C | -55 C to +125 C |
| BNX029-01L BNX029-01K BNX029-01B | 100F20 50% | 6.3V | 15.8V | 20A | 0.43m 0.20m | 0.5M min. | 35dB min. (15KHz 1GHz) | 45mV max. | -40 C to +125 C | -55 C to +125 C |
Standard Testing Conditions
Temperature: Ordinary Temp. 15 C to 35 C (In case of doubt: 20 C 2 C)
Humidity: Ordinary Humidity 25 %(RH) to 85 %(RH) (In case of doubt: 60 %(RH) to 70 %(RH))
Atmospheric pressure: 86kPa to 106kPa
Dimensions and Mass
Unit Mass (Typical value): 0.80g
Marking
Filter shall be marked with Murata Mark, Part Number (e.g., BNX022 for BNX022-01), and Polarity Marking ().
Electrical Performance Summary
- Insertion Loss: Meets item 3 specification.
- Capacitance: Measured per specified conditions for each series.
- DC Resistance: Measured by 4-terminal method.
- Insulation Resistance: Measured at DC rated voltage.
- Withstanding Voltage: Filter shall be no failure under specified test voltages.
- Voltage Drop: Meets item 3 specification.
Mechanical Performance Summary
- Appearance and Dimensions: Visual inspection and measurement.
- Marking: Visual inspection.
- Reflow Solderability: Appropriate solder fillet formation required.
- Resistance to soldering iron: Tested under specified conditions.
- Bending Strength: Tested on glass-epoxy substrate.
- Drop: Tested by free fall on concrete or steel board.
- Vibration: Tested on glass-epoxy substrate with specified oscillation frequency and amplitude.
- Shock: Tested on glass-epoxy substrate with specified acceleration and waveform.
Environmental Performance Summary
- Heat Shock: Tested for specified cycles and temperature conditions.
- Humidity Life: Tested under specified temperature, humidity, and voltage conditions.
- Heat Life: Tested under specified temperature and voltage conditions.
Packaging Specification
- Appearance and Dimensions: 24mm-wide plastic tape with specified dimensions.
- Taping: Products packaged in plastic tape cavities.
- Packing Quantity: 400 pcs./reel (178mm), 1500 pcs./reel (330mm).
2410121456_muRata-BNX023-01L_C703067.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
