Product Overview
The Murata DLP0NS Series Chip Common Mode Choke Coil is designed for noise suppression in various electronic circuits. It features a film-type structure and is available in different dimensions and impedance ratings to suit specific application needs, including MIPI D-PHY interfaces.
Product Attributes
- Brand: MURATA MFG.CO., LTD
- Product Type: Chip Common Mode Choke Coil
- Series: DLP0NS Series
- Structure: Film Type
- Polarity: No polarity
- Mass (Typical): 0.001g
- Marking: No Marking
- Certifications: RoHS compliant
Technical Specifications
| Murata Part Number | Common Mode Impedance (at 100MHz) | Rated Voltage | Rated Current | DC Resistance | Category |
|---|---|---|---|---|---|
| DLP0NSN350HL2L | 3510 | 5V(DC) | 100mA | 1.225% | General Use |
| DLP0NSN350HL2B | 3510 | 5V(DC) | 100mA | 1.225% | General Use |
| DLP0NSN670HL2L | 67 20% | 5V(DC) | 110mA | 2.425% | General Use |
| DLP0NSN670HL2B | 67 20% | 5V(DC) | 110mA | 2.425% | General Use |
| DLP0NSN900HL2L | 90 20% | 5V(DC) | 100mA | 3.025% | General Use |
| DLP0NSN900HL2B | 90 20% | 5V(DC) | 100mA | 3.025% | General Use |
| DLP0NSN121HL2L | 120 20% | 5V(DC) | 90mA | 3.825% | General Use |
| DLP0NSN121HL2B | 120 20% | 5V(DC) | 90mA | 3.825% | General Use |
| DLP0NSC280HL2L | 2820% | 5V(DC) | 100mA | 1.325% | MIPI D-PHY Use (DSI, CSI, UniPro) |
| DLP0NSC280HL2B | 2820% | 5V(DC) | 100mA | 1.325% | MIPI D-PHY Use (DSI, CSI, UniPro) |
| DLP0NSC900HL2L | 9035% | 5V(DC) | 75mA | 4.030% | MIPI D-PHY Use (DSI, CSI, UniPro) |
| DLP0NSC900HL2B | 9035% | 5V(DC) | 75mA | 4.030% | MIPI D-PHY Use (DSI, CSI, UniPro) |
Operating and Storage Conditions
Operating Temperature: -40 to +85C
Storage Temperature: -40 to +85C
Environmental Performance
Tested under Temperature Cycle, Humidity, Heat Life, and Cold Resistance conditions as specified in the datasheet.
Mechanical Performance
Tested for Appearance, Dimensions, Solderability, Resistance to Soldering Heat, Drop, Vibration, and Bending Strength as specified in the datasheet.
Application Notes
Mounting Direction: Mount products in the correct direction to avoid circuit malfunction, flames, or other serious trouble. Wrong direction (90 rotated) can cause open/short circuits.
Limitation of Applications: Contact Murata before using in applications requiring extremely high reliability, such as aircraft, aerospace, medical, transportation, and power plant control equipment, or similar complex/high-reliability applications.
Soldering: Designed for reflow soldering only. Consult Murata for alternative mounting methods like conductive adhesive. Use rosin-based flux (not highly acidic, chlorine content <0.2wt%) and Sn-3.0Ag-0.5Cu solder. Avoid Sn-Zn based solder.
2410121457_muRata-DLP0NSC280HL2L_C337895.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
