Wire Wound Chip Common Mode Choke Coil DLW5BTHTQ2
This reference specification applies to Wire Wound Chip Common Mode Choke Coil DLW5BTH_TQ Series for Automotive Electronics based on AEC-Q200. These coils are designed for noise suppression in automotive electronic systems.
Product Attributes
- Brand: MURATA MFG CO., LTD.
- Certifications: AEC-Q200
- Origin: Japan (implied by manufacturer)
- Material: Wire Wound Chip (implied)
- Color: Not specified
Technical Specifications
| MURATA Part Number | Impedance at 10MHz ( min.) | Impedance at 100MHz ( Typ.) | Rated Voltage V(DC) | Withstanding Voltage V(DC) | Rated Current(*) (A) | DC Resistance (Rdc) (max.) | Insulation Resistance (M min.) | ESD Rank | Packaging Code |
|---|---|---|---|---|---|---|---|---|---|
| DLW5BTH101TQ2L | 10 | 100 | 50 | 125 | 4.0 | 0.013 | 10 | 2 | L |
| DLW5BTH101TQ2K | 10 | 100 | 50 | 125 | 4.0 | 0.013 | 10 | 2 | K |
| DLW5BTH101TQ2B | 10 | 100 | 50 | 125 | 4.0 | 0.013 | 10 | 2 | B |
| DLW5BTH251TQ2L | 20 | 250 | 3.0 | - | 2.0 | 0.020 | - | - | L |
| DLW5BTH251TQ2K | 20 | 250 | 3.0 | - | 2.0 | 0.020 | - | - | K |
| DLW5BTH251TQ2B | 20 | 250 | 3.0 | - | 2.0 | 0.020 | - | - | B |
| DLW5BTH501TQ2L | 30 | 500 | 2.5 | - | 1.5 | 0.027 | - | - | L |
| DLW5BTH501TQ2K | 30 | 500 | 2.5 | - | 1.5 | 0.027 | - | - | K |
| DLW5BTH501TQ2B | 30 | 500 | 2.5 | - | 1.5 | 0.027 | - | - | B |
| DLW5BTH102TQ2L | 60 | 1000 | 2.0 | - | 1.2 | 0.034 | - | - | L |
| DLW5BTH102TQ2K | 60 | 1000 | 2.0 | - | 1.2 | 0.034 | - | - | K |
| DLW5BTH102TQ2B | 60 | 1000 | 2.0 | - | 1.2 | 0.034 | - | - | B |
| DLW5BTH142TQ2L | 100 | 1400 | 1.5 | - | 1.0 | 0.056 | - | - | L |
| DLW5BTH142TQ2K | 100 | 1400 | 1.5 | - | 1.0 | 0.056 | - | - | K |
| DLW5BTH142TQ2B | 100 | 1400 | 1.5 | - | 1.0 | 0.056 | - | - | B |
(*)As for DLW5BTH_TQ type Rated Current is derated depending on the operating temperature. Operating Temperature: -40 C to +125 C. Storage Temperature: -40 C to +125 C.
Standard Testing Conditions: Temperature: 15 C to 35 C, Humidity: 25 %(RH) to 85 %(RH), Atmospheric pressure: 86 kPa to 106 kPa.
Dimensions: LW (not specified in detail, but typical dimensions for the series are 5.0x5.0 mm).
Packaging Codes: L: Taping (180mm/reel), K: Taping (330mm/reel), B: Bulk.
Application Scenarios: Automotive Electronics.
Caution: Mount products in the right direction. Wrong direction may cause short/open circuit, flames, or other serious trouble. Do not exceed maximum rated current.
2410121448_muRata-DLW5BTH251TQ2L_C527594.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
