<
>
Specifications
Insulation Resistance(IR):
10MΩ
Operating Temperature:
-40℃~+85℃
DC Resistance(DCR):
1.2Ω
Voltage Rating - DC:
5V
Number of Lines:
2
Mfr. Part #:
DLM0NSB120HY2D
Package:
SMD-4P,0.9x0.7mm
Key Attributes
Model Number:
DLM0NSB120HY2D
Product Description
Chip Common Mode Choke Coil DLM0NS Series
The DLM0NS Series Chip Common Mode Choke Coil is designed for differential signal interface in electronics. These monolithic, magnetically shielded coils offer effective noise suppression and signal integrity for various electronic applications.
Product Attributes
- Brand: MURATA MFG.CO., LTD
- Product Type: Chip Common Mode Choke Coil
- Series: DLM0NS
- Structure: Monolithic Type
- Circuit Type: Magnetically shielded one circuit type
- Polarity: No polarity
- Marking: No Marking
Technical Specifications
| Murata Part Number | Common Mode Impedance (at 100MHz) | Rated Voltage | Rated Current | DC Resistance | Insulation Resistance | Cut-off Frequency | Operating Temperature | Storage Temperature |
| DLM0NSB120HY2D | 125 | 5V(DC) | 160mA | 1.225% | 10M min. | 8GHz(Typ.) | -40 to +85C | -40 to +85C |
| DLM0NSB120HY2B | 125 | 5V(DC) | 160mA | 1.225% | 10M min. | 8GHz(Typ.) | -40 to +85C | -40 to +85C |
| DLM0NSB280HY2D | 2830% | 5V(DC) | 130mA | 1.925% | 10M min. | 5GHz(Typ.) | -40 to +85C | -40 to +85C |
| DLM0NSB280HY2B | 2830% | 5V(DC) | 130mA | 1.925% | 10M min. | 5GHz(Typ.) | -40 to +85C | -40 to +85C |
| DLM0NSN500HY2D | 5025% | 5V(DC) | 100mA | 2.725% | 10M min. | 5GHz(Typ.) | -40 to +85C | -40 to +85C |
| DLM0NSN500HY2B | 5025% | 5V(DC) | 100mA | 2.725% | 10M min. | 5GHz(Typ.) | -40 to +85C | -40 to +85C |
| DLM0NSN900HY2D | 9025% | 5V(DC) | 100mA | 4.025% | 10M min. | 2GHz(Typ.) | -40 to +85C | -40 to +85C |
| DLM0NSN900HY2B | 9025% | 5V(DC) | 100mA | 4.025% | 10M min. | 2GHz(Typ.) | -40 to +85C | -40 to +85C |
| DLM0NSM900HY2D | 9025% | 5V(DC) | 100mA | 3.825% | 10M min. | 5GHz(Typ.) | -40 to +85C | -40 to +85C |
| DLM0NSM900HY2B | 9025% | 5V(DC) | 100mA | 3.825% | 10M min. | 5GHz(Typ.) | -40 to +85C | -40 to +85C |
Dimensions
Unit Mass (Typical): 0.9mg
Dimensions (LW): Not specified in detail, but packaging dimensions indicate tape width of 8mm and pitch of 2mm.
Packaging
Packaging Code: D (Taping) / B (Bulk)
Taping Specification: 8mm-wide, 2mm pitch Paper tape
- Packing Quantity: 10,000 pcs./reel
- Packing Method: Products packed in base tape cavity and sealed by Cover tape.
- Sprocket Hole: To the right as tape is pulled toward the user.
- Spliced Point: Cover tape has no spliced point.
- Missing Components: Within 0.1% of the number per reel or 1 pc., whichever is greater, and not continuous.
- Pull Strength of Paper Tape: 5N min.
- Pull Strength of Cover Tape: 10N min.
- Peeling off force of Cover Tape: 0.1 to 0.6N (Minimum value is Typical) at 300 mm/min.
Caution
- Mounting Direction: Mount products in the correct direction. Wrong direction (90 rotated) can cause open/short circuits, flames, or other serious trouble.
- Limitation of Applications: Contact manufacturer before using in applications requiring especially high reliability to prevent defects that might directly cause damage to third party's life, body, or property. This includes aircraft, aerospace, undersea, power plant control, medical, transportation, traffic signal, disaster prevention/crime prevention, data-processing equipment, and similar applications.
- Corrosive Gas: Refrain from use in environments with corrosive gases (sulfur gas, chlorine, ammonia, etc.) or oils (cutting oil, silicone oil, etc.) that have come into contact with the aforementioned gases.
2410121457_muRata-DLM0NSB120HY2D_C3211689.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
