<
>
Specifications
Inductance @ Frequency:
100uH@0.1MHz
Insulation Resistance(IR):
10MΩ
Operating Temperature:
-40℃~+125℃
DC Resistance(DCR):
2.6Ω
Voltage Rating - DC:
50V
Number of Lines:
2
Voltage Withstand:
125V
Mfr. Part #:
DLW32MH101XT2L
Package:
SMD-4P,3.2x2.5mm
Key Attributes
Model Number:
DLW32MH101XT2L
Product Description
Product Overview
The DLW32MH_XT Series is a Wire Wound Chip Common Mode Choke Coil designed for automotive electronics, compliant with AEC-Q200 standards. It offers effective noise suppression for common mode signals.
Product Attributes
- Brand: MURATA
- Origin: Japan (implied by MFG.CO., LTD)
- Certifications: AEC-Q200
- Material: Wire Wound Chip
- Color: Not specified
Technical Specifications
| Murata Part Number | Common Mode Inductance (Typ. at 0.1MHz) | Rated Voltage V(DC) | Withstanding Voltage V(DC) | Rated Current (mA) | DC Resistance () | Insulation Resistance (Mmin.) | ESD Rank | Operating Temperature Range | Storage Temperature Range |
|---|---|---|---|---|---|---|---|---|---|
| DLW32MH101XT2L | 100H typ. at 500mV (80H (-25%/+50%) at 100mV) | 50 | 125 | 100 | 2.620% | 10 | 5B (12kV(AD) < 16kV(AD)) | 40C to +125C | 40C to +125C |
| AEC-Q200 Stress Test Method | Test Conditions | Performance Requirement |
|---|---|---|
| 3 High Temperature Exposure | 1000h at 125 deg C | Meet Table A after testing. |
| 4 Temperature Cycling | 1000cycles -40 deg C to +125 deg C | Meet Table A after testing. |
| 7 Biased Humidity | 1000h at 85 deg C, 85%RH, Apply rated current | Meet Table A after testing. |
| 8 Operational Life | 1000h at 125 deg C, Apply rated current | Meet Table A after testing. |
| 13 Mechanical Shock | Per MIL-STD-202 Method 213 Condition F: 1500gs(14.7N)/0.5ms/Half sine | Meet Table A after testing. |
| 14 Vibration | 5g's(0.049N) for 20 min, 12cycles each of 3 orientations, Test from 10-2000Hz. | Meet Table A after testing. |
| 15 Resistance to Soldering Heat | Solder temperature 260C+/-5 deg C, Immersion time 10s, Pre-heating:150 to 180C / 9030s | Appearance No damaged, Common Mode Inductance Change (at 0.1MHz) Within 20% |
| 17 ESD | Per AEC-Q200-002 | Meet Table A after testing. |
| 18 Solderbility | Per J-STD-002 Method b | The External electrodes for mounting land patterns shall be at least 95% covered with new solder coating. |
| 21 Board Flex | Epoxy-PCB(1.6mm), Deflection 2mm(min), 60 s minimum holding time | Meet Table A after testing. |
| 22 Terminal Strength | Per AEC-Q200-006, A force of 17.7N for 60s | No defects |
2410121551_muRata-DLW32MH101XT2L_C2935101.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
