<
>
Specifications
Insulation Resistance(IR):
10MΩ
Operating Temperature:
-40℃~+105℃
DC Resistance(DCR):
20mΩ
Voltage Rating - DC:
50V
Number of Lines:
2
Voltage Withstand:
125V
Mfr. Part #:
DLW5ATN111TQ2L
Package:
SMD,5x3.6mm
Key Attributes
Model Number:
DLW5ATN111TQ2L
Product Description
Product Overview
The DLW5AT_TQ Series is a Wire Wound Chip Common Mode Choke Coil designed for noise suppression. It offers low profile and is suitable for various electronic applications requiring effective common mode noise filtering.
Product Attributes
- Brand: MURATA MFG CO.,LTD.
- Origin: Japan (implied by MURATA MFG CO.,LTD.)
- Type: Wire Wound Chip Common Mode Choke Coil
- Series: DLW5AT_TQ
- Certifications: RoHS compliant (implied by RoHS marking)
Technical Specifications
| MURATA Part Number | Impedance at 10MHz (+/-25%) | Impedance at 100MHz (Typ.) | Rated Voltage V(DC) | Rated Current (A) | DC Resistance (Rdc) (max.) | Insulation Resistance (M min.) | Packaging Code |
|---|---|---|---|---|---|---|---|
| DLW5ATN111TQ2L | 12 | 110 | 50 | 5.0 | 0.020 | 10 | L |
| DLW5ATN111TQ2K | 12 | 110 | 50 | 5.0 | 0.020 | 10 | K |
| DLW5ATN111TQ2B | 12 | 110 | 50 | 5.0 | 0.020 | 10 | B |
| DLW5ATN231TQ2L | 22 | 230 | 50 | 4.0 | 0.027 | 10 | L |
| DLW5ATN231TQ2K | 22 | 230 | 50 | 4.0 | 0.027 | 10 | K |
| DLW5ATN231TQ2B | 22 | 230 | 50 | 4.0 | 0.027 | 10 | B |
| DLW5ATN401TQ2L | 35 | 400 | 50 | 2.5 | 0.034 | 10 | L |
| DLW5ATN401TQ2K | 35 | 400 | 50 | 2.5 | 0.034 | 10 | K |
| DLW5ATN401TQ2B | 35 | 400 | 50 | 2.5 | 0.034 | 10 | B |
| DLW5ATN501TQ2L | 55 | 500 | 50 | 2.0 | 0.056 | 10 | L |
| DLW5ATN501TQ2K | 55 | 500 | 50 | 2.0 | 0.056 | 10 | K |
| DLW5ATN501TQ2B | 55 | 500 | 50 | 2.0 | 0.056 | 10 | B |
Dimensions
| Parameter | Value (mm) |
|---|---|
| L | 5.0 0.3 |
| W | 3.6 0.3 |
| T | 2.20 0.15 |
| Electrode min. | 0.5 |
| Other internal dimensions | See diagram |
Electrical Performance
| Item | Specifications | Test Method |
|---|---|---|
| Impedance (|Z|) (at 10MHz) | Meet item 3. | KEYSIGHT 4191A or equivalents, 10MHz |
| Insulation Resistance (I.R.) | 10 M min. | R8340A or equivalents, 2x Rated Voltage, within 60s |
| DC Resistance (Rdc) | See table above | 100 mA max. |
| Withstanding Voltage | Products shall not be damaged. | 125 V(DC), 60 s, 1 mA max. charge current |
Mechanical Performance
| Item | Specifications | Test Method |
|---|---|---|
| Appearance and Dimensions | Meet item 5. | Visual Inspection, Slide Calipers |
| Bonding Strength and Core Strength | No evidence of chipping, breakage, or coming off glass-epoxy substrate. | Applying Force (F): 10N, Time: 51s |
| Body strength | No evidence of chipping, breakage. | Applying Force (F): 10N, Time: 51s |
| Bending Strength | Appearance: No damaged. Impedance change (at 10MHz): within 20%. I.R.: 10M min. Withstanding Voltage: No damaged. | Table 1 (Substrate: Glass-epoxy (t=1.6mm), Deflection: 2mm, Keeping Time: 30s, Speed: 0.5 mm/s) |
| Vibration | Products shall be soldered on the substrate. | Frequency: 10 to 55 to 10Hz for 1 min. Total Amplitude: 1.5mm. Time: 2 hours in each of 3 mutually perpendicular directions (Total 6 hours). |
| Drop | Products shall be dropped on concrete or steel board. | Method: free fall, Height: 1m, Number of Times: 10 Times |
| Solderability | Electrodes shall be at least 90% covered with new solder coating. | Flux: Rosin ethanol solution (25wt%), Pre heating: 15010C, 1 min. Solder: Sn-3.0Ag-0.5Cu, Temp: 2455C, Immersion Time: 41s, Immersion/Immersion rates: 25mm/s |
| Resistance to Soldering heat | Meet Table 1. | Flux: Rosin ethanol solution (25wt%), Pre heating: 15010C, 1 min. Solder: Sn-3.0Ag-0.5Cu, Temp: 2705C, Immersion Time: 51s, Immersion/Immersion rates: 25mm/s. Measured after 4 to 48 hours room condition exposure. |
Environmental Performance
| Item | Specifications | Test Method |
|---|---|---|
| Temperature Cycle | Meet Table 1. | 1 cycle: -40C (0,-3)C/30min, Ordinary temp./3min, +105C (+3,0)C/30min, Ordinary temp./3min. Total 100 cycles. Measured after 4 to 48 hours room condition exposure. |
| Humidity | Temperature: 402C, Humidity: 90-95%(RH), Time: 1000h (+48h, -0h). Measured after 4 to 48 hours room condition exposure. | - |
| Humidity Load | Temperature: 402C, Humidity: 90-95%(RH), Test Voltage: Rated Voltage, Time: 1000h (+48h, -0h). Measured after 4 to 48 hours room condition exposure. | (ref. Item 10.) |
| Heat life | Temperature: 1052C, Test Voltage: 2x Rated Voltage, Time: 1000h (+48h, -0h). Measured after 4 to 48 hours room condition exposure. | (ref. Item 10.) |
| Cold Resistance | Temperature: -402C, Time: 1000h (+48h, -0h). Measured after 4 to 48 hours room condition exposure. | (ref. Item 10.) |
Packaging Specification
| Item | Details |
|---|---|
| Taping (180mm/reel) | 700 pcs. / reel |
| Taping (330mm/reel) | 2500 pcs. / reel |
| Packing Method | Products packaged in embossed cavity of plastic tape and sealed with cover tape. |
| Sprocket Hole | To the right as tape is pulled toward the user. |
| Spliced point | Cover tape has no spliced point. |
| Missing components number | Within 0.1% of the number per reel or 1 pc., whichever is greater, and not continuous. |
| Pull Strength of Plastic Tape | 5 N min. |
| Pull Strength of Cover Tape | 10 N min. |
| Peeling off force of Cover Tape | 0.2N to 0.7N (minimum value is typical.) Speed: 300 mm/min |
| Leader-tape, Trailer and Reel Dimensions | See diagrams for 'L' (180mm reel) and 'K' (330mm reel) packaging codes. |
| Marking for reel | Customer part number, MURATA part number, Inspection number, RoHS marking, Quantity, etc. |
| Marking for Outside package | Customer name, Purchasing Order Number, Customer Part Number, MURATA part number, RoHS marking, Quantity, etc. |
| Outer Case Dimensions (180mm reel) | W: 186, D: 186, H: 93 (Standard Quantity: 4 reels) |
| Outer Case Dimensions (330mm reel) | W: 340, D: 340, H: 85 (Standard Quantity: 4 reels) |
Caution
Mounting Direction: Mount products in the correct direction. Incorrect orientation (90 rotated) can lead to open/short circuits, flames, or other serious trouble.
Limitation of Applications
Contact MURATA before using this product for applications requiring especially high reliability to prevent defects that might directly cause damage to third partys life, body, or property. Such applications include:
- Aircraft equipment
- Aerospace equipment
- Undersea equipment
- Power plant control equipment
- Medical equipment
- Transportation equipment (automobiles, trains, ships, etc.)
- Traffic signal equipment
- Disaster prevention / crime prevention equipment
- Data-processing equipment
- Applications of similar complexity or with reliability requirements comparable to the above.
Notice
Products can only be soldered with reflow. This product is designed for solder mounting. Please consult us in advance for applying other mounting methods.
2410121448_muRata-DLW5ATN111TQ2L_C524541.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
