<
>
Specifications
Insulation Resistance(IR):
100MΩ
Operating Temperature:
-40℃~+125℃
DC Resistance(DCR):
10mΩ
Voltage Rating - DC:
-
Number of Lines:
2
Voltage Withstand:
100V
Mfr. Part #:
1259CM-0001=P3
Package:
SMD-4P,9x7mm
Key Attributes
Model Number:
1259CM-0001=P3
Product Description
Product Overview
The UCMH0907 is a high-performance electronic component designed for various applications. It offers reliable electrical characteristics and robust mechanical properties, making it suitable for demanding environments. This product is RoHS compliant.
Product Attributes
- Brand: Not Specified
- Origin: Not Specified
- Material: Not Specified
- Color: Not Specified
- Certifications: RoHS Comp.
Technical Specifications
| Item | Specification | Condition |
| Type | UCMH0907 | |
| Rated current | 5.0A max | |
| DCR | 10m max | |
| Dielectric strength | 100 V DC shall be applied respectively between a ferrite and wires, between wires and wires for 1 minute. Without dielectric breakdown. | Initial value 3.0 dB |
| Insulation resistance | 100M or more. 100V DC shall be applied respectively between a ferrite and wires, between wires and wires for 1 minute. Insulation resistance shall be measured with application of the voltage. | Initial value 3.0 dB |
| Bending test | Satisfies (B) specification. Apply pressure gradually in the direction of the arrow at a rate of about 0.5mm/s until bent depth reaches 3mm and hold for 305 s. | |
| Adhesion strength | Satisfies (B) specification. A static load using a R0.5 pressing tool shall be applied to the body of the specimen in the direction of the arrow and shall be hold for 605 s. Measure after removing pressure. | |
| Vibration | Satisfies (B) specification. The specimen shall be subjected to a vibration of 1.5mm amplitude, sweep frequency 10200010Hz 20 minitue 1cycle for 12 cycle in each of 3(X, Y, Z) axes. | |
| Mechanical shock | Satisfies (B) specification. Peak acceleration 981 m/s2 Duration of pulse 6 ms 3 times in each of 3(X, Y, Z) axes. The specimen must be fixed on test board. Three successive shock shall be applied in the perpendicular direction of each surface of the specimen. | |
| Free fall test | Satisfies (B) specification. The specimen must be fixed on test board. It must be equipped with instruments of which weight is 500g. Then it shall be fallen freely from 1m height to rigid wood 3 times in each of three axes. | |
| Solder ability | Satisfies (B) specification. Terminals shall be immersed for 5 to 10 seconds in flux at room temperature. Dip sample into solder bath containing molten solder at 2455 for 30.5 seconds. Solder covered surface shall be more than 75%. | |
| Resistance to soldering heat | Satisfies (B) specification. Reflow soldering method. Preheat 150180, 9030 s. Peak temp. 250(+5,-0) (230min, 3010 s). The specimen shall be subjected to the reflow process under the above condition 2 times. Test board shall be 0.8 mm thick. Base material shall be glass epoxy resin. Measurement shall be made after storing in standard atmospheric conditions for 1 h. | |
| Dielectric strength | Without damage. 100V DC shall be applied for 60 s between the terminal and the core. | |
| Insulation resistance | 100M or more. 100V DC shall be applied between the terminal and the core. | |
| Low temperature | Satisfies (B) specification. The specimen shall be stored at a temperature of -403 for 100012 h. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1 h. | |
| Dry heat | Satisfies (B) specification. The specimen shall be stored at a temperature of 1252 for 100012 h. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1 h. | |
| Dump heat | Satisfies (B) specification. The specimen shall be stored at a temperature of 852 with relative humidity of 855% for 100012 h. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1 h. | |
| Dump heat with load | Satisfies (B) specification. The specimen shall be excited at the rated DC current and shall be stored at a temperature of +852 with relative humidity of 85% 5% for 100012 h. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1 h. | |
| Temperature cycle | Satisfies (B) specification. The specimen shall be subjected to 1000 continuous cycles of temperature change of -40 for 30 min and 125 for 30 min with the transit period of 2min or less. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1 h. | |
| Thermal Shock | Satisfies (B) specification. The specimen shall be subjected to 20 continuous cycles of temperature change of -40 for 15 min and 125 for 15 min with the transit period of 20 seconds or less. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1 h. | |
| Operating temperature range | -40 +125 | *Including self temperature rise. |
| Standard atmospheric conditions | Ambient temperature : 5 to 35 , Relative humidity : 45% to 85% , Air pressure : 86kPa to 106kPa. If more strict measurement is required, measurement shall be made within: Ambient temperature : 202 , Relative humidity : 655% , Air pressure : 86kPa to 106kPa. |
2411220218_muRata-1259CM-0001-P3_C2662455.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
