<
>
Specifications
Current - Supply:
2mA
Operating Temperature:
-40℃~+85℃
Output Type:
Clipped Sine Wave
Voltage - Supply:
3V
Frequency Stability:
±200ppb
Frequency:
20MHz
Mfr. Part #:
XNCLH20M000THJA1P0
Package:
SMD5032-8P
Key Attributes
Model Number:
XNCLH20M000THJA1P0
Product Description
Product Overview
This product specification applies to the crystal oscillator used for communication systems, GPS, and similar applications. Please contact Murata Manufacturing Co., Ltd. for any other applications.
Product Attributes
- Brand: Murata
- Document Number: JGU43-0215
- Issue Date: January 10, 2018
Technical Specifications
| Item | Specification | Details |
| Part Number | XNCLH20M000THJA1P0 | Frequency: 20.000000MHz / Size: 5.0 x 3.2mm |
| Appearance | No illegible marking. No visible dirt. | |
| Dimensions | Refer to item 7 for component dimensions. | Figure 1. Dimensions (Unit: mm) |
| Supply Voltage (Rating) | -0.6+6.0V | |
| Storage Temperature Range | -40+85 | |
| Nominal Frequency | 20.000000MHz | |
| Operating Temperature Range | -40+85 | |
| Supply Voltage (Operating) | DC:+3.0V5% | |
| Current Consumption | 2.0mA max. | |
| Output Level | 0.8Vp-p min. | *1 |
| Load Condition | (10k//10pF)10% | |
| Output Wave | Clipped Sine WaveDC coupling) | *1: DC-cut capacitor (1,000pF) is not built-in and should be added to the output line. |
| Frequency Shift by Temperature | 0.2ppm max. (-40+85) | *2: From initial value @+25. Max. rate of temperature change: 2/min. |
| Frequency Voltage Coefficient | 0.05ppm max. | (DC:+3.0V5%) |
| Frequency Load Coefficient | 0.05ppm max. | (10k//10pF)10% |
| Frequency Aging | 0.5ppm max. (1 year) | (@+252) |
| Frequency Tolerance after Reflow-soldering | 1.0ppm max. (2 times) | *3: Reference 13-3-2 Recommendable Soldering Profile. |
| Frequency Tolerance (Initial) | 0.5ppm max. | *4: @+252. Reference Nominal Frequency. |
| Product Marking | Clearly marked, not easily removed by finger. Includes Frequency (4 digits), Crystal Date Code (YWW), Murata Trade Mark, TCXO Date Code (YWW). | See Section 6 for details. |
| Packaging Standard (Taping) | Reel contains 2000 pcs (for P0 suffix). Taping specification shown in Figure 2. Plastic embossed tape dimensions in Figure 3. Plastic reel dimensions in Figure 4. | See Section 8 for details. |
| Measuring Method | Oscilloscope and frequency counter as per Figure 5. | Oscilloscope: Impedance 1M, Input Load 14pF, Bandwidth 300MHz. Standard conditions: +253, 45-85%R.H. |
| Free Fall | 3 times from 75cm onto maple board. | No visible damage, meets Table 1. |
| Vibration (Sinusoidal) | 10-55Hz, 1.5mm amplitude, 2 hours in X, Y, Z directions. | Meets Table 1. |
| Board Flex | 4mm deflection on 1.6mm PCB, held for 201 sec. | Meets Table 1. |
| Solderability | Lead free solder (Sn-3.0Ag-0.5Cu). Terminals immersed in +2453C solder for 3.00.5s after aging. | 95% of terminal surface coated with solder. |
| High Temperature Exposure (Storage) | +852C for 1000 hours. | Meets Table 1. Measured after 24 hours at room temp. |
| Cold (Storage) | -402C for 1000 hours. | Meets Table 1. Measured after 24 hours at room temp. |
| Humidity | +852C, 85%R.H. for 1000 hours. | Meets Table 1. Measured after 24 hours at room temp. |
| Temperature Cycling | 100 cycles (-40C for 30 min to +85C for 30 min). | Meets Table 1. Measured after 24 hours at room temp. |
| Table 1 (Post-Test Specs) | Frequency deviation: 2.0ppm max. (from initial value). Output Level: 0.8V p-p. Current Consumption: 2.0mA. | Measured after 4 to 12 hours at room temperature and humidity. |
| Cautions (Limitation of Applications) | High reliability applications (aviation, space, medical, etc.) require prior contact. Avoid use in critical control functions for transportation equipment. | See Section 12-1 for a full list. |
2411280106_muRata-XNCLH20M000THJA1P0_C1988834.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
