<
>
Specifications
Voltage Rating:
25V
Capacitance:
100nF
Temperature Coefficient:
X5R
Tolerance:
±10%
Mfr. Part #:
GRM033R61E104KE14D
Package:
0201
Key Attributes
Model Number:
GRM033R61E104KE14D
Product Description
Product Overview
Chip Multilayer Ceramic Capacitors for General Electronic equipment. Designed for general-purpose applications, these capacitors offer reliable performance in a compact 0201 size with X5R temperature characteristics.
Product Attributes
- Brand: MURATA
- Origin: Not specified
- Material: Ceramic
- Color: Not specified
- Certifications: Not specified
Technical Specifications
| Part Number | Size Code | Temperature Characteristics | Nominal Capacitance | Capacitance Tolerance | Rated Voltage | Packaging | Dimensions (mm) L/W | Dimensions (mm) T |
| GRM033R61E104KE14 | 0201 | X5R (EIA) | 0.1uF | +/-10% | DC 25 V | 15000 pcs./Reel (W8P2, 180mm Reel PAPER Tape) | 0.6 +/-0.03 | 0.3 +/-0.03 |
| GRM033R61E104KE14 | 0201 | X5R (EIA) | 0.1uF | +/-15% | DC 25 V | 30000 pcs./Reel (W8P1, 180mm Reel PAPER Tape) | 0.6 +/-0.03 | 0.3 +/-0.03 |
| GRM033R61E104KE14 | 0201 | X5R (EIA) | 0.1uF | +/-15% | DC 25 V | 50000 pcs./Reel (W8P2, 330mm Reel PAPER Tape) | 0.6 +/-0.03 | 0.3 +/-0.03 |
Specifications and Test Methods
| No. | Item | Specification | Test Method (Ref. Standard:JIS C 5101, IEC60384) |
| 1 | Rated Voltage | Shown in Rated value. | The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. |
| 2 | Appearance | No defects or abnormalities. | Visual inspection. |
| 3 | Dimension | Shown in Rated value. | Using Measuring instrument of dimension. |
| 4 | Voltage Proof | No defects or abnormalities. | Measurement Point : Between the terminations Test Voltage : 250% of the rated voltage Applied Time : 1s to 5s Charge/Discharge Current : 50mA max. |
| 5 | Insulation Resistance(I.R.) | More than 50F | Measurement Temperature:Room Temperature Measurement Point : Between the terminations Measurement Voltage : Rated Voltage Charging Time : 1min Charge/Discharge Current : 50mA max. |
| 6 | Capacitance | Shown in Rated value. | Measurement Temperature:Room Temperature Measurement Frequency : 1.0+/-0.1kHz Measurement Voltage : 1.0+/-0.2Vrms |
| 7 | Q or Dissipation Factor (D.F.) | DF:0.1 max. | Measurement Temperature : Room Temperature Measurement Frequency : 1.0+/-0.1kHz Measurement Voltage : 1.0+/-0.2Vrms |
| 8 | Capacitance | Within +/-15% (No bias) | Measurement Temperature: Room Temperature, Measurement Frequency: 1.0+/-0.1kHz, Measurement Voltage: Less than 1.0Vrms. Pre-treatment : Heat treatment at 150+0/-10C for 1hour and then let sit for 24+/-2hours at room temperature, then measure. |
| 9 | Adhesive Strength of Termination | No removal of the terminations or other defect should occur. | Solder the capacitor on the test substrate shown in Fig.3. Termination Applied Force : 2N Holding Time : 10+/-1 Applied Direction : In parallel with the test substrate and vertical with the capacitor side |
| 10 | Vibration | Appearance: No defects or abnormalities. Capacitance: Within the specified initial value. Q or D.F.: Within the specified initial value. | Solder the capacitor on the test substrate shown in Fig.3. Kind of Vibration : Simple harmonic motion 10Hz to 55Hz to 10Hz Vibration Time : 1min Total Amplitude : 1.5mm This motion should be applied for a period of 2hours in each 3 mutually perpendicular directions(total of 6hours). |
| 11 | Substrate Bending Test | Appearance: No defects or abnormalities. Capacitance: Within +/-10% | Solder the capacitor on the test substrate shown in Fig.1. Pressurization Method : Shown in Fig.2. Flexure : 1mm Change Holding Time : 5+/-1s Soldering Method : Reflow soldering |
| 12 | Solderability | 95% of the terminations is to be soldered evenly and continuously. | Solder bath method, Flux: Solution of rosin ethanol 25(mass)%, Preheat: 80 to 12010s to 30s, Solder: Sn-3.0Ag-0.5Cu(Lead Free Solder), Test Temp. : 245+/-5, Test Time : 2+/-0.5s |
| 13 | Resistance to Soldering Heat | Appearance: No defects or abnormalities. Capacitance: Within +/-15%. Q or D.F.: Within the specified initial value. I.R.: Within the specified initial value. Voltage Proof: No defects. | Solder bath method, Solder: Sn-3.0Ag-0.5Cu(Lead Free Solder), Solder Temp. : 270+/-5, Test Time : 10+/-0.5s, Preheat Temp. : 120 to 150, Preheat Time : 1min. Pre-treatment : Heat treatment at 150+0/-10C for 1hour and then let sit for 24+/-2hours at room temperature, then measure. Post-treatment : Let sit for 24+/-2hours at room temperature, then measure. |
| 14 | Temperature Sudden Change | Appearance: No defects or abnormalities. Capacitance: Within +/-7.5%. Q or D.F.: Within the specified initial value. I.R.: Within the specified initial value. Voltage Proof: No defects. | Solder the capacitor on the test substrate shown in Fig.3. Cycles : 5 cycles. Pre-treatment : Heat treatment at 150+0/-10C for 1hour and then let sit for 24+/-2hours at room temperature, then measure. Post-treatment : Let sit for 24+/-2hours at room temperature, then measure. |
| 15 | High Temperature High Humidity (Steady) | Appearance: No defects or abnormalities. Capacitance: Within +/-12.5%. Q or D.F.: DF:0.2 max. I.R.: More than 500M or 12.5F (Whichever is smaller) | Solder the capacitor on the test substrate shown in Fig.3. Test Temperature : 40+/-2, Test Humidity : 90%RH to 95%RH (Steady), Test Time : 500+/-12h, Test Voltage : Rated Voltage. Pre-treatment : Heat treatment at 150+0/-10C for 1hour and then let sit for 24+/-2hours at room temperature, then measure. Post-treatment : Heat treatment at 150+0/-10C for 1hour and then let sit for 24+/-2hours at room temperature, then measure. |
| 16 | Durability | Appearance: No defects or abnormalities. Capacitance: Within +/-12.5%. Q or D.F.: DF:0.2 max. I.R.: More than 1000M or 25F (Whichever is smaller) | Solder the capacitor on the test substrate shown in Fig.3. Test Temperature : Maximum Operating Temperature+/-3, Test Time : 1000+/-12h, Test Voltage : 150% of the rated voltage. Pre-treatment : Heat treatment at 150+0/-10C for 1hour and then let sit for 24+/-2hours at room temperature, then measure. Post-treatment : Heat treatment at 150+0/-10C for 1hour and then let sit for 24+/-2hours at room temperature, then measure. |
2410121857_muRata-GRM033R61E104KE14D_C76939.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
