<
>
Specifications
Voltage Rating:
6.3V
Capacitance:
100uF
Temperature Coefficient:
X5R
Tolerance:
±20%
Mfr. Part #:
GRM31CR60J107ME39L
Package:
1206
Key Attributes
Model Number:
GRM31CR60J107ME39L
Product Description
Product Overview
The GRM31CR60J107ME39 is a Chip Monolithic Ceramic Capacitor designed for general electronic equipment. It offers a capacitance of 100uF with a rated DC voltage of 6.3V and operates within a temperature range of -55 to 85 C.
Product Attributes
- Brand: MURATA
- Type: Chip Monolithic Ceramic Capacitor
- Temperature Characteristics: X5R (EIA)
Technical Specifications
| Part Number | Capacitance | Rated Voltage (DC) | Temperature Range | Capacitance Tolerance | Dimensions (LxWxT) | Packaging |
|---|---|---|---|---|---|---|
| GRM31CR60J107ME39 | 100 uF | 6.3 V | -55 to 85 C | 20 % | 3.20.3 x 1.60.3 x 1.60.3 mm | 180mm Reel EMBOSSED W8P4 (2000 pcs./Reel), 330mm Reel EMBOSSED W8P4 (6000 pcs./Reel) |
Specifications and Test Methods
| No. | Item | Specification | Test Method |
|---|---|---|---|
| 1 | Rated Voltage | DC 6.3 V | Shown in Rated value. |
| 2 | Appearance | No defects or abnormalities. | Visual inspection. |
| 3 | Dimension | Within the specified dimensions. | Using calipers. |
| 4 | Voltage proof | No defects or abnormalities. | Between the terminations. Test Voltage: 250% of the rated voltage. Applied Time: 1 to 5 s. |
| 5 | Insulation Resistance(I.R.) | More than 50F | Between the terminations. Measurement Voltage: DC Rated Voltage. Charging Time: 1 min. |
| 6 | Capacitance | 100 uF | Shown in Rated value. Measurement Temperature: Room Temperature. |
| 7 | Dissipation Factor (D.F.) | 0.15 max. (for GRM31CR60J107) | Measurement Temperature: Room Temperature. Measurement Voltage: 0.5+/-0.1Vrms. |
| 8 | Temperature Characteristics of Capacitance | -15 to 15 % (-55 to 85 C) | Measurement Voltage: 50% of the rated voltage. Initial measurement: Heat treatment at 150+0/-10C for 1h and then let sit for 24+/-2h at room temperature. |
| 9 | Adhesive Strength of Termination | No removal of the terminations or other defect should occur. | Solder the capacitor on the test substrate. Applied Force: 10 N. Holding Time: 10+/-1s. |
| 10 | Vibration | Appearance: No defects or abnormalities. Capacitance: Within the specified initial value. D.F.: Within the specified initial value. | Solder the capacitor on the test substrate. Kind of Vibration: Simple harmonic motion 10Hz to 55Hz to 10Hz (1min). Applied for 2h in each 3 mutually perpendicular directions. |
| 11 | Substrate Bending test | Capacitance Change: Within +/-10% | Solder the capacitor on the test substrate. Pressurization method: Shown in Fig.2. Flexure: 1mm. Holding Time: 5+/-1s. |
| 12 | Solderability | 95% of the terminations is to be soldered evenly and continuously. | Solder bath method. Flux: Rosin ethanol 25(wt)%. Solder: Sn-3.0Ag-0.5Cu. Solder Temp: 245+/-5. Immersion time: 2+/-0.5s. |
| 13 | Resistance to Soldering Heat | Capacitance Change: Within +/-7.5%. D.F.: Within the specified initial value. I.R.: Within the specified initial value. Voltage proof: No defects. | Solder bath method. Solder: Sn-3.0Ag-0.5Cu. Solder Temp: 270+/-5. Immersion time: 10+/-0.5s. Preheat: GRM31 size max.: 120 to 150 for 1 min. Initial measurement: Heat treatment at 150+0/-10C for 1h and then let sit for 24+/-2h at room temperature. |
| 14 | Temperature Sudden Change | Capacitance Change: Within +/-7.5%. D.F.: Within the specified initial value. I.R.: Within the specified initial value. Voltage proof: No defects. | Solder the capacitor on the test substrate. Five cycles of heat treatments. Exposure Time: 24+/-2h. Initial measurement: Heat treatment at 150+0/-10C for 1h and then let sit for 24+/-2h at room temperature. |
| 15 | High Temperature High Humidity (Steady) | Capacitance Change: Within +/-12.5%. D.F.: 0.2 max. I.R.: More than 12.5F. | Solder the capacitor on the test substrate. Test Temperature: 40+/-2. High Humidity: 90%RH to 95%RH. Test Time: 500+/-12h. Applied Voltage: DC Rated Voltage. Initial measurement: Heat treatment at 150+0/-10C for 1h and then let sit for 24+/-2h at room temperature. |
| 16 | Durability | Capacitance Change: Within +/-12.5%. D.F.: 0.2 max. I.R.: More than 25F. | Solder the capacitor on the test substrate. Test Temperature: Max. Operating Temp. +/-3. Test Time: 1000+/-12h. Applied Voltage: 150% of the rated voltage. Initial measurement: Heat treatment at 150+0/-10C for 1h and then let sit for 24+/-2h at room temperature. |
2410121552_muRata-GRM31CR60J107ME39L_C77085.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
