<
>
Specifications
Voltage Rating:
50V
Capacitance:
12pF
Temperature Coefficient:
C0G
Tolerance:
±5%
Mfr. Part #:
GRM1555C1H120JA01D
Package:
0402
Key Attributes
Model Number:
GRM1555C1H120JA01D
Product Description
Product Overview
This product specification applies to Chip Multilayer Ceramic Capacitors for General Electronic equipment. These capacitors are designed for general-purpose applications and offer reliable performance.
Product Attributes
- Brand: MURATA
- Part Number: GRM1555C1H120JA01_
- Packaging Code: D, J, W
Technical Specifications
| Part Number | Size Code | Temperature Characteristics | Rated Voltage | Nominal Capacitance | Capacitance Tolerance | Packaging | Packaging Unit |
| GRM1555C1H120JA01_ | 0402 | C0G(EIA) | DC 50 V | 12pF | +/-5 % | PAPER Tape | 10000 pcs./Reel (W8P2) |
| GRM1555C1H120JA01_ | 0402 | C0G(EIA) | DC 50 V | 12pF | +/-5 % | PAPER Tape | 20000 pcs./Reel (W8P1) |
| GRM1555C1H120JA01_ | 0402 | C0G(EIA) | DC 50 V | 12pF | +/-5 % | PAPER Tape | 50000 pcs./Reel (W8P2) |
Specifications and Test Methods
| Item | Specification | Test Method | |
| Rated Voltage | DC 50 V | Shown in Rated value. | |
| Dimension | 0402 | Shown in Rated value. Using Measuring instrument of dimension. | |
| Temperature Characteristics | C0G(EIA) | +/-0.05 0.5 +/-0.05 0.5 +/-0.05 D (8)Code Packaging Unit MURATA PART NO. Packaging GRM1555C1H120JA01_ (1)-1 L (1)-2 W (2) T e 0.15 to 0.35 Dimensions(mm) 0.3 min. W 10000 pcs./Reel 20000 pcs./Reel 180mm Reel PAPER Tape W8P2 180mm Reel PAPER Tape W8P1 J 330mm Reel PAPER Tape W8P2 50000 pcs./Reel 0+/-30 ppm/ DC 50 V (1)L/W Dimensions (2)T Dimensions (3)Temperature Characteristics (4)Rated Voltage (5)Nominal Capacitance (6)Capacitance Tolerance (8)Packaging Code (7)Muratas Control Code GRM 15 5 5C 1H 120 J A01 D GRM1555C1H120JA01-01A | Reflow 25 to 125 12pF +/-5 % -55 to 125 Operating Temp. Range |
| Nominal Capacitance | 12pF | Measurement Temperature:Room Temperature Measurement Frequency : 1.0+/-0.1MHz Measurement Voltage : 0.5 to 5.0Vrms | |
| Capacitance Tolerance | +/-5 % | Measurement Temperature:Room Temperature Measurement Frequency : 1.0+/-0.1MHz Measurement Voltage : 0.5 to 5.0Vrms | |
| Voltage Proof | No defects or abnormalities. | Test Voltage : 300% of the rated voltage Applied Time : 1s to 5s Charge/Discharge Current : 50mA max. | |
| Insulation Resistance(I.R.) | More than 10000M | Measurement Voltage : Rated Voltage Charging Time : 2min Charge/Discharge Current : 50mA max. | |
| Q or Dissipation Factor (D.F.) | Q400+20C C:Nominal Capacitance(pF) | Measurement Temperature : Room Temperature Measurement Frequency : 1.0+/-0.1MHz Measurement Voltage : 0.5 to 5.0Vrms | |
| Capacitance Change (Temperature Characteristics) | Within +/-0.2% or +/-0.05pF (Whichever is larger) | The capacitance change should be measured after 5 minutes at each specified temperature stage. | |
| Adhesive Strength of Termination | No removal of the terminations or other defect should occur. | Applied Force : 5N Holding Time : 10+/-1 Applied Direction : In parallel with the test substrate and vertical with the capacitor side | |
| Vibration | Appearance: No defects or abnormalities. Capacitance: Within the specified initial value. Q or D.F.: Within the specified initial value. | Total Amplitude : 1.5mm Vibration Time : 1min This motion should be applied for a period of 2hours in each 3 mutually perpendicular directions(total of 6hours). | |
| Substrate Bending Test | Appearance: No defects or abnormalities. Capacitance: Within +/-5% or +/-0.5pF (Whichever is larger) | Flexure : 1mm Holding Time : 5+/-1s | |
| Solderability | 95% of the terminations is to be soldered evenly and continuously. | Solder bath method Flux : Solution of rosin ethanol 25(mass)% Preheat : 80 to 12010s to 30s Solder : Sn-3.0Ag-0.5Cu(Lead Free Solder) Test Temp. : 245+/-5 Test Time : 2+/-0.5s | |
| Resistance to Soldering Heat | Appearance: No defects or abnormalities. Capacitance: Within +/-2.5% or +/-0.25pF (Whichever is larger) Q or D.F.: Within the specified initial value. I.R.: Within the specified initial value. Voltage Proof: No defects. | Solder bath method Solder : Sn-3.0Ag-0.5Cu(Lead Free Solder) Solder Temp. : 270+/-5 Test Time : 10+/-0.5s Preheat Temp. : 120 to 150 Preheat Time : 1min Post-treatment : Let sit for 24+/-2hours at room temperature, then measure. | |
| Temperature Sudden Change | Appearance: No defects or abnormalities. Capacitance: Within +/-2.5% or +/-0.25pF (Whichever is larger) Q or D.F.: Within the specified initial value. I.R.: Within the specified initial value. Voltage Proof: No defects. | Cycles : 5 cycles Post-treatment : Let sit for 24+/-2hours at room temperature, then measure. | |
| High Temperature High Humidity (Steady) | Appearance: No defects or abnormalities. Capacitance: Within +/-7.5% or +/-0.75pF (Whichever is larger) Q or D.F.: Q100+10C/3 C:Nominal Capacitance(pF) I.R.: More than 500M or 25F (Whichever is smaller) | Test Temperature : 40+/-2 Test Humidity : 90%RH to 95%RH (Steady) Test Time : 500+/-12h Test Voltage : Rated Voltage Charge/Discharge Current : 50mA max. Post-treatment : Let sit for 24+/-2hours at room temperature, then measure. | |
| Durability | Appearance: No defects or abnormalities. Capacitance: Within +/-3% or +/-0.3pF (Whichever is larger) Q or D.F.: Q275+5C/2 C:Nominal Capacitance(pF) I.R.: More than 1000M or 50F (Whichever is smaller) | Test Temperature : Maximum Operating Temperature+/-3 Test Time : 1000+/-12h Test Voltage : 200% of the rated voltage Charge/Discharge Current : 50mA max. Post-treatment : Let sit for 24+/-2hours at room temperature, then measure. |
2410121857_muRata-GRM1555C1H120JA01D_C76948.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
