High Pass Filter LTCC SMT HFCV-2002+
The HFCV-2002+ is a miniature low temperature co-fired ceramic (LTCC) high pass filter with a 19.6 to 47 GHz passband supporting a variety of applications. This model provides 1.6 dB typical insertion loss over a wide band due to its rugged monolithic construction. Housed in a tiny 1210 ceramic form factor, the filter is ideal for dense signal chain PCB layouts where it complements MMIC size and performance. The LTCC fabrication process assures minimal RF performance variation while delivering a product that is well suited for environmental extremes of high humidity and temperature. Key features include more than an octave bandwidth for wideband applications, cost-effective LTCC scalability, small 1210 size for high layout density, and surface mountability for automated assembly. Applications include Test & Measurement Equipment, 5G mmWave Radio Systems, Satellite Communications, and ISM Applications.
Product Attributes
- Brand: Mini-Circuits
- Material: LTCC (Low Temperature Co-Fired Ceramic)
- Form Factor: 1210
- Case Style: JV1210C-13
Technical Specifications
| Parameter | Frequency (GHz) | Min. | Typ. | Max. | Units | Notes |
|---|---|---|---|---|---|---|
| Stop Band Insertion Loss | DC-F1 (0.1 - 8) | - | 21.9 | - | dB | 1 |
| Stop Band Insertion Loss | F1-F2 (8.1 - 15) | - | 17.8 | - | dB | 1 |
| Pass Band Insertion Loss | F3-F4 (19.6 - 26.5) | - | 1.0 | 1.7 | dB | 1 |
| Pass Band Insertion Loss | F4-F5 (26.6 - 38) | - | 1.6 | 2.4 | dB | 1 |
| Pass Band Insertion Loss | F5-F6 (38.1 - 47) | - | 2.2 | 3.8 | dB | 1 |
| Return Loss | F3-F4 (19.6 - 26.5) | - | 15.1 | - | dB | 1 |
| Return Loss | F4-F5 (26.6 - 38) | - | 10.7 | - | dB | 1 |
| Return Loss | F5-F6 (38.1 - 47) | - | 15 | - | dB | 1 |
| Operating Temperature | - | -55C | - | +125C | C | - |
| Storage Temperature | - | -55C | - | +125C | C | - |
| RF Power Input | - | - | - | 1W | max. | - |
Notes:
1. Measured on Mini-Circuits Test Board TB-HFCV-2002C+ with connectors and feedlines effects de-embedded using 2X Thru IEEE P370 method.
2. This component is not intended to act as a DC block. Please consult with Mini-Circuits for further details. DC blocking capacitors are required in applications where DC voltage and/or current is present at either input or output ports.
2410121800_Mini-Circuits-HFCV-2002-_C20622212.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
