<
>
Specifications
Current - Saturation (Isat):
800mA
Mfr. Part #:
MPIT4018-330M-LF
Package:
SMD,4x4mm
Key Attributes
Model Number:
MPIT4018-330M-LF
Product Description
Product Overview
The MPIT4018 series is a range of SMD power inductors designed for various electronic applications. These inductors offer reliable performance and are manufactured by SHENZHEN MICROGATE TECHNOLOGY CO., LTD. in China.
Product Attributes
- Brand: MICROGATE
- Origin: P.R.C.
- Product Name: SMD power inductor
- Series: MPIT4018 series
- Environmental Compliance: Lead free products (LF)
Technical Specifications
| Microgate Part No. | Inductance (uH) | DCR () Max. | DCR () Typ. | Isat (A) Max. | Isat (A) Typ. | Irms (A) Max. | Irms (A) Typ. |
| MPIT4018-R24M-LF | 0.2420% | 0.016 | 0.012 | 6.50 | 7.00 | 4.60 | 5.00 |
| MPIT4018-R68M-LF | 0.6820% | 0.025 | 0.021 | 6.00 | 7.00 | 3.80 | 4.15 |
| MPIT4018-1R0M-LF | 1.020% | 0.030 | 0.025 | 4.55 | 4.85 | 3.40 | 3.80 |
| MPIT4018-1R2M-LF | 1.220% | 0.030 | 0.025 | 4.20 | 4.80 | 3.40 | 3.80 |
| MPIT4018-1R5M-LF | 1.520% | 0.036 | 0.030 | 3.90 | 4.25 | 2.95 | 3.20 |
| MPIT4018-2R2M-LF | 2.220% | 0.048 | 0.040 | 3.15 | 3.40 | 2.60 | 2.90 |
| MPIT4018-2R7M-LF | 2.720% | 0.060 | 0.050 | 2.70 | 3.00 | 2.20 | 2.50 |
| MPIT4018-3R3M-LF | 3.320% | 0.060 | 0.050 | 2.70 | 3.00 | 2.20 | 2.50 |
| MPIT4018-3R9M-LF | 3.920% | 0.078 | 0.065 | 2.60 | 2.80 | 2.00 | 2.20 |
| MPIT4018-4R7M-LF | 4.720% | 0.078 | 0.065 | 2.10 | 2.30 | 2.00 | 2.20 |
| MPIT4018-6R8M-LF | 6.820% | 0.108 | 0.090 | 1.70 | 1.85 | 1.70 | 1.90 |
| MPIT4018-100M-LF | 1020% | 0.168 | 0.140 | 1.40 | 1.55 | 1.20 | 1.30 |
| MPIT4018-150M-LF | 1520% | 0.228 | 0.190 | 1.15 | 1.25 | 1.00 | 1.20 |
| MPIT4018-220M-LF | 2220% | 0.336 | 0.280 | 1.00 | 1.10 | 0.95 | 1.10 |
| MPIT4018-330M-LF | 3320% | 0.480 | 0.400 | 0.80 | 0.90 | 0.75 | 0.85 |
| MPIT4018-470M-LF | 4720% | 0.720 | 0.600 | 0.70 | 0.80 | 0.60 | 0.70 |
| MPIT4018-560M-LF | 5620% | 0.912 | 0.760 | 0.65 | 0.80 | 0.53 | 0.58 |
| MPIT4018-101M-LF | 10020% | 1.740 | 1.450 | 0.45 | 0.55 | 0.30 | 0.35 |
| MPIT4018-221M-LF | 22020% | 3.600 | 3.000 | 0.30 | 0.34 | 0.21 | 0.23 |
| Item | Required Characteristics | Test Method/Condition |
| High temperature storage test | 1. No case deformation or change in appearance. 2. Inductance change 10% |L|/L10% | Temperature: 1252 Time: 1000 hours Measurement at 244 hours after test conclusion. |
| Low temperature storage test | Inductance change 10% |L|/L10% | Temperature: -552 Time: 1000 hours Measurement at 244 hours after test conclusion. |
| Humidity test | Inductance change 10% |L|/L10% | Temperature: 85, Humidity: 85% RH Time: 1000 hours Measurement at 244 hours after test conclusion. |
| Thermal shock test | Inductance change 10% |L|/L10% | -40 for 30min to 125 for 30min, 1000 cycles. |
| Solderability test | Terminal area must have 90% min. solder coverage. | Dip pads in flux then dip in solder pot at 2455 for 50.1 second. Solder: Sn96.5%Ag3%Cu0.5%. Flux: rosin flux. |
| Heat endurance of reflow soldering | 1. No case deformation or change in appearance. 2. Inductance change 10% |L|/L10% | Refer to reflow curve, 3 times. Peak temperature: 260+5/-0. |
| Vibration test | Inductance change 10% |L|/L10% | 10~55Hz, 1.5mm amplitude in each of 3 mutually perpendicular directions for 2 hours each (total 6 hours). |
| Drop test | No damage. | Drop 10 times on a concrete floor from a height of 1m. |
| Terminal strength push test | Terminal should not pull off. | Pulling test: 17.64N force for 10s. Bending test: 2mm deflection at 0.5mm/sec speed. |
| Loading at High Temperature | 1. No case deformation or change in appearance. 2. Inductance change 10% |L|/L10% | Temperature: 852 Time: 1000 hours Apply rated current. Measurement at 244 hours after test conclusion. |
2410121252_microgate-MPIT4018-330M-LF_C281273.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
