<
>
Specifications
Current - Saturation (Isat):
2.85A
Mfr. Part #:
MPIT5040-100M-LF
Package:
2020
Key Attributes
Model Number:
MPIT5040-100M-LF
Product Description
Product Overview
The MPIT series of SMD power inductors are designed for various electronic applications. These inductors offer reliable performance with specified electrical characteristics, construction details, and reliability testing.
Product Attributes
- Brand: MICROGATE (implied from text)
- Series: MPIT
- Lead Free: Yes
Technical Specifications
| Part No. | Inductance (uH) | DCR (m)max | Isat (A) max | Irms (A) max | Operating Temperature Range | Storage Temperature Range |
| MPIT5040-1R0N-LF | 1.030% | 13 | 7.35 | 4.9 | -40~85 | -40~125 |
| MPIT5040-1R5N-LF | 1.530% | 15 | 6.30 | 4.2 | -40~85 | -40~125 |
| MPIT5040-2R2N-LF | 2.230% | 19 | 4.90 | 3.7 | -40~85 | -40~125 |
| MPIT5040-3R3N-LF | 3.330% | 24 | 3.95 | 3.4 | -40~85 | -40~125 |
| MPIT5040-4R7M-LF | 4.720% | 30 | 3.50 | 3.0 | -40~85 | -40~125 |
| MPIT5040-5R6M-LF | 5.620% | 33 | 3.2 | 2.5 | -40~85 | -40~125 |
| MPIT5040-6R8M-LF | 6.820% | 49 | 3.0 | 2.3 | -40~85 | -40~125 |
| MPIT5040-100M-LF | 1020% | 64 | 2.85 | 2.1 | -40~85 | -40~125 |
| MPIT5040-150M-LF | 1520% | 86 | 2.5 | 2.0 | -40~85 | -40~125 |
| MPIT5040-220M-LF | 2220% | 129 | 1.8 | 1.4 | -40~85 | -40~125 |
| MPIT5040-330M-LF | 3320% | 188 | 1.5 | 1.2 | -40~85 | -40~125 |
| MPIT5040-470M-LF | 4720% | 270 | 1.25 | 1.0 | -40~85 | -40~125 |
| MPIT5040-680M-LF | 6820% | 400 | 0.96 | 0.77 | -40~85 | -40~125 |
| MPIT5040-101M-LF | 10020% | 560 | 0.82 | 0.66 | -40~85 | -40~125 |
| MPIT5040-221M-LF | 22020% | 1030 | 0.55 | 0.45 | -40~85 | -40~125 |
| Item | Specifications | Test Method/Condition |
| Operating temperature range | 25~ +85 | Including temperature rise due to self-generated heat |
| Terminal strength-pull test | Terminal shall not be loosened or ruptured | A 5N. load shall be applied to both terminals in the axis direction for 60 sec. |
| Solderability test | The terminal shall be at least 90% covered with solder. | After fluxing, Inductor shall be dipped in a melted solder bath at 2305for 5 seconds. |
| Resistance to solvent test | There shall be no case deformation change in appearance obliteration of marking. | MIL-STD-105E |
| Vibration test (low frequency) | 1.Inductors shall be no evidence of electrical and mechanical damage. 2.Inductance shall not change more than=5%. 3.Q shall not change more than=20% | 1.Amplitude:1.5mm. 2.Frequency:10~55~10Hz/min. 3.Direction:X.Y.Z. 4.Duration:2 hrs/X.Y.Z. |
| Shock test | Inductors shall be dropped 10 from a height of 1m onto 3cm wooden board. | |
| Resistance to soldering heat | Temp:2605,Time:101sec | |
| High temperature load life test | There shall be no evidence of Short or open circuiting. | 1. temp:852. 2. time: 100012 hours. 3. load: allowed DC current. |
| Humidity load life | 1. temp: 402. 2. R.H: 90-95%. 3. time: 100012 hours. 4. load: allowed DC current. | |
| Temperature characteristic | 1. Inductors shall be no evidence of electrical and mechanical damage 2. Inductance shall not change more than5%. 3. Q shall not change more than 30%. | 25~ +85 |
| Humidity test | 1. Temp:402. 2. R.H:90-95%. 3. Time:962 hours. | |
| Cold test | 1. Temp:-402. 2. Time:962 hours. | |
| Thermal shock test | ||
| Dry heat test | 1. temp:852 2. time: 962 hours |
2410121944_microgate-MPIT5040-100M-LF_C486555.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
