<
>
Specifications
Mfr. Part #:
MPIT6028-1R0M-LF
Package:
SMD,6x6mm
Key Attributes
Model Number:
MPIT6028-1R0M-LF
Product Description
Product Overview
The MPIT6028 series is a range of SMD power inductors designed for various electronic applications. These inductors offer reliable performance and are manufactured by Shenzhen Microgate Technology Co., Ltd.
Product Attributes
- Brand: Microgate
- Origin: Shenzhen, P.R.C.
- Material: Ni-Zn Ferrite core, Enameled Copper Wire, Ag/Ni/Sn/Cu terminals, Epoxy resin and magnetic powder magnetic glue.
- Certifications: Lead-free product.
Technical Specifications
| Microgate Part No. | Inductance (uH) | DCR () | Isat (A) | Irms (A) |
| MPIT6028-1R0M31-LF | 1.020% | 0.010 | 5.75 | 5.20 |
| MPIT6028-1R5M31-LF | 1.520% | 0.013 | 6.00 | 4.58 |
| MPIT6028-1R8M31-LF | 1.820% | 0.016 | 5.50 | 4.10 |
| MPIT6028-2R2M31-LF | 2.220% | 0.020 | 5.10 | 3.75 |
| MPIT6028-2R7M31-LF | 2.720% | 0.020 | 3.80 | 3.75 |
| MPIT6028-3R3M31-LF | 3.320% | 0.025 | 4.15 | 3.48 |
| MPIT6028-4R7M31-LF | 4.720% | 0.030 | 3.00 | 3.08 |
| MPIT6028-5R1M31-LF | 5.120% | 0.043 | 3.20 | 2.60 |
| MPIT6028-6R2M31-LF | 6.220% | 0.047 | 3.05 | 2.40 |
| MPIT6028-6R8M31-LF | 6.820% | 0.047 | 2.60 | 2.40 |
| MPIT6028-8R2M31-LF | 8.220% | 0.055 | 2.30 | 2.25 |
| MPIT6028-9R1M31-LF | 9.120% | 0.074 | 2.55 | 2.15 |
| MPIT6028-100M31-LF | 1020% | 0.072 | 2.04 | 1.95 |
| MPIT6028-120M31-LF | 1220% | 0.080 | 1.80 | 1.85 |
| MPIT6028-150M31-LF | 1520% | 0.125 | 1.75 | 1.45 |
| MPIT6028-180M31-LF | 1820% | 0.120 | 1.52 | 1.45 |
| MPIT6028-220M31-LF | 2220% | 0.140 | 1.45 | 1.40 |
| MPIT6028-270M31-LF | 2720% | 0.155 | 1.50 | 1.32 |
| MPIT6028-330M31-LF | 3320% | 0.185 | 1.35 | 1.22 |
| MPIT6028-360M31-LF | 3620% | 0.215 | 1.25 | 1.13 |
| MPIT6028-390M31-LF | 3920% | 0.225 | 1.25 | 1.10 |
| MPIT6028-470M31-LF | 4720% | 0.315 | 1.15 | 1.06 |
| MPIT6028-680M31-LF | 6820% | 0.360 | 0.80 | 0.86 |
| MPIT6028-750M31-LF | 7520% | 0.410 | 0.90 | 0.81 |
| MPIT6028-820M31-LF | 8220% | 0.500 | 0.80 | 0.70 |
| MPIT6028-101M31-LF | 10020% | 0.500 | 0.65 | 0.70 |
Dimensions
| Model | A | B | C | D | E | f | g | h |
| (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | |
| MPIT6028 | 6.00.3 | 6.00.3 | 2.8 Max. | 1.50.3 | 3.00.3 | 5.7Typ. | 1.6Typ. | 4.7 Typ. |
Testing Conditions
Unless otherwise specified:
- Temperature: Ordinary Temperature (5 to 35)
- Humidity: Ordinary Humidity (25 to 85% RH)
- Atmospheric Pressure: 86 to 106 kPa
In case of doubt:
- Temperature: 202
- Humidity: 60 to 75% RH
- Atmospheric Pressure: 86 to 106 kPa
Operating Conditions
- Operating temperature range: -25 ~ +120 (Including self-heating)
Recommended Soldering Conditions
Product can be applied to flow and reflow soldering.
Flow soldering conditions
- Pre-heating: Temperature difference between solder and product surface limited to 150 max.
- Cooling: Temperature difference into solvent after soldering limited to 100 max.
- Standard soldering profile: Pre-heating 150, 1 minute min; Peak 350, 3 seconds max.
Reflow soldering conditions
- Average Ramp-Up Rate (Ts max. to Tp): 3/second max.
- Preheat: 150 to 200, 60-180 seconds.
- Time maintained above TL (217): 60-150 seconds.
- Peak/Classification Temperature (Tp): 260, 3-4 seconds.
- Time within 5C of actual Peak Temperature (Tp): 20-40 seconds.
- Ramp-Down Rate: 6C/second max.
- Time 25C to Peak Temperature: 8 minutes max.
Re-work with iron
- Pre-heating: 150, 1 minute.
- Tip temperature: 350 max.
- Soldering iron output: 80W max.
- End of soldering iron tip: 1mm max.
- Soldering time: 3 seconds max.
- Product once removed from the circuit board may not be used again.
Package Information
Dimension of tape (Unit: mm)
| W | A0 | B0 | K0 | E | F | P | P0 | D0 | T |
| 12.00.3 | 6.40.1 | 6.40.1 | 3.20.1 | 1.750.1 | 5.50.05 | 8.00.1 | 4.00.1 | 1.500.1 | 0.350.05 |
Dimension of reel (Unit: mm)
| Symbol | A | B | C | G |
| Dimension | 3301 | 1001 | 130.5 | 12.40.3 |
Taping figure and drawing direction
Refer to attached diagrams (not included in text).
2409272102_microgate-MPIT6028-1R0M-LF_C696483.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
