<
>
Specifications
Current - Saturation (Isat):
3A
Mfr. Part #:
MPIT5040-6R8M-LF
Package:
2020
Key Attributes
Model Number:
MPIT5040-6R8M-LF
Product Description
Product Overview
The MPIT series of SMD power inductors are designed for various electronic applications. These inductors offer reliable performance with a focus on lead-free compliance.
Product Attributes
- Brand: MPIT (implied by product name)
- Material: Ferrite core, Enameled Copper Wire, Sn99.7-Cu0.3 solder, Epoxy Adhesive
- Certifications: Lead-free products
Technical Specifications
| Part No. | Inductance (uH) | DCR (m)max | Isat (A) max | Irms (A) max |
| MPIT5040-1R0N-LF | 1.030% | 13 | 7.35 | 4.9 |
| MPIT5040-1R5N-LF | 1.530% | 15 | 6.30 | 4.2 |
| MPIT5040-2R2N-LF | 2.230% | 19 | 4.90 | 3.7 |
| MPIT5040-3R3N-LF | 3.330% | 24 | 3.95 | 3.4 |
| MPIT5040-4R7M-LF | 4.720% | 30 | 3.50 | 3.0 |
| MPIT5040-5R6M-LF | 5.620% | 33 | 3.2 | 2.5 |
| MPIT5040-6R8M-LF | 6.820% | 49 | 3.0 | 2.3 |
| MPIT5040-100M-LF | 1020% | 64 | 2.85 | 2.1 |
| MPIT5040-150M-LF | 1520% | 86 | 2.5 | 2.0 |
| MPIT5040-220M-LF | 2220% | 129 | 1.8 | 1.4 |
| MPIT5040-330M-LF | 3320% | 188 | 1.5 | 1.2 |
| MPIT5040-470M-LF | 4720% | 270 | 1.25 | 1.0 |
| MPIT5040-680M-LF | 6820% | 400 | 0.96 | 0.77 |
| MPIT5040-101M-LF | 10020% | 560 | 0.82 | 0.66 |
| MPIT5040-221M-LF | 22020% | 1030 | 0.55 | 0.45 |
| Item | Specifications | Test Method/Condition |
| Operating temperature range | 25~ +85 | Including temperature rise due to self-generated heat |
| Terminal strength-pull test | Terminal shall not be loosened or ruptured | A 5N. load shall be applied to both terminals in the axis direction for 60 sec. |
| Solderability test | The terminal shall be at least 90% covered with solder. | After fluxing, Inductor shall be dipped in a melted solder bath at 2305for 5 seconds. |
| Resistance to solvent test | There shall be no case deformation, change in appearance, obliteration of marking. | MIL-STD-105E |
| Vibration test (low frequency) | 1. Inductors shall be no evidence of electrical and mechanical damage. 2. Inductance shall not change more than=5%. 3. Q shall not change more than=20% | 1. Amplitude:1.5mm. 2. Frequency:10~55~10Hz/min. 3. Direction:X.Y.Z. 4. Duration:2 hrs/X.Y.Z. |
| Shock test | Inductors shall be dropped 10 from a height of 1m onto 3cm wooden board. | |
| Resistance to soldering heat | Temp:2605, Time:101sec | |
| High temperature load life test | There shall be no evidence of Short or open circuiting. | 1. temp:852. 2. time: 100012 hours. 3. load: allowed DC current. |
| Humidity load life | 1. temp: 402. 2. R.H: 90-95%. 3. time: 100012 hours. 4. load: allowed DC current. | |
| Temperature characteristic | 1. Inductors shall be no evidence of electrical and mechanical damage. 2. Inductance shall not change more than5%. 3. Q shall not change more than 30%. | 25~ +85 |
| Humidity test | 1. Temp:402. 2. R.H:90-95%. 3. Time:962 hours. | |
| Cold test | 1. Temp:-402. 2. Time:962 hours. | |
| Thermal shock test | ||
| Dry heat test | 1. temp:852 2. time: 962 hours |
2410121944_microgate-MPIT5040-6R8M-LF_C486553.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
