<
>
Specifications
Current - Saturation (Isat):
1.85A
Mfr. Part #:
MPIE201610-1R0M-LF
Package:
0806
Key Attributes
Model Number:
MPIE201610-1R0M-LF
Product Description
Product Overview
The MPIE201610 series of SMD power inductors are designed for various electronic applications. These inductors offer reliable performance and are manufactured by SHENZHEN MICROGATE TECHNOLOGY CO., LTD. They are suitable for use in a wide range of operating temperatures and are compliant with lead-free standards.
Product Attributes
- Brand: SHENZHEN MICROGATE TECHNOLOGY CO., LTD.
- Origin: P.R.C.
- Material: Ni-Zn Ferrite core, Enameled Copper Wire, Ag/Ni/Sn/Cu terminals, Epoxy resin and magnetic powder glue.
- Color: Not specified
- Certifications: Lead-free products
Technical Specifications
| Microgate Part No. | Inductance (uH) | DCR () Max | DCR () Typ | Isat (A) Max | Isat (A) Typ | Irms (A) Max | Irms (A) Typ |
| MPIE201610-R24M-LF | 0.2420% | 0.032 | 0.025 | 4.50 | 4.85 | 3.70 | 4.30 |
| MPIE201610-R33M-LF | 0.3320% | 0.026 | 0.022 | 3.20 | 3.50 | 4.50 | 5.00 |
| MPIE201610-R47M-LF | 0.4720% | 0.042 | 0.035 | 2.55 | 3.60 | 2.80 | 3.00 |
| MPIE201610-R68M-LF | 0.6820% | 0.058 | 0.048 | 2.50 | 3.00 | 2.60 | 3.00 |
| MPIE201610-1R0M-LF | 1.020% | 0.070 | 0.060 | 1.85 | 2.20 | 2.50 | 2.60 |
| MPIE201610-1R5M-LF | 1.520% | 0.120 | 0.100 | 1.50 | 1.70 | 1.70 | 2.00 |
| MPIE201610-2R2M-LF | 2.220% | 0.150 | 0.125 | 1.30 | 1.60 | 1.50 | 1.60 |
| MPIE201610-4R7M-LF | 4.720% | 0.350 | 0.265 | 1.00 | 1.10 | 1.00 | 1.10 |
| MPIE201610-100M-LF | 1020% | 0.815 | 0.680 | 0.68 | 0.75 | 0.61 | 0.70 |
| MPIE201610-150M-LF | 1520% | 1.440 | 1.200 | 0.40 | 0.50 | 0.40 | 0.45 |
| MPIE201610-220M-LF | 2220% | 1.750 | 1.460 | 0.50 | 0.53 | 0.36 | 0.40 |
| Item | Required Characteristics | Test Method/Condition |
| High temperature storage test | No case deformation or change in appearance. | L|/L10% | Temperature: 1252, Time: 1000 hours. Measurement at 244 hours after test conclusion. |
| Low temperature storage test | No case deformation or change in appearance. | L|/L10% | Temperature: -402, Time: 1000 hours. Measurement at 244 hours after test conclusion. |
| Humidity test | No case deformation or change in appearance. | L|/L10% | Temperature: 25-85, Humidity: 85% RH, Time: 1000 hours. Measurement at 244 hours after test conclusion. |
| Thermal shock test | No case deformation or change in appearance. | L|/L10% | -40 for 30min. to 125 for 30min. as 1 cycle. Go through 1000 cycles. |
| Solderability test | Terminal area must have 90% min. solder coverage. | Dip pads in flux then dip in solder pot at 2455 for 50.1 second. Solder: Sn96.5%Ag3%Cu0.5%. Flux: rosin flux. |
| Heat endurance of reflow soldering | No case deformation or change in appearance. | L|/L10% | Refer to reflow curve, Go through 3 times. The peak temperature: 260+5/-0. |
| Vibration test | No case deformation or change in appearance. | L|/L10% | Apply frequency 10~55Hz. 1.5mm amplitude in each of 3 mutually perpendicular directions for 2 hours each (total 6 hours). |
| Drop test | No case deformation or change in appearance. | L|/L10% | Drop 10 times on a concrete floor from a height of 1m. |
| Terminal strength push test | Terminal should not pull off. | Apply 17.64N force for 10s after soldering on PCB. |
| Bending test | Terminal should not pull off. | Bend the testing PCB at middle point, the deflection shall be 2mm. Pressurizing Speed: 0.5mm/sec, Keep time: 60 1s. |
| Loading at High Temperature | No case deformation or change in appearance. | L|/L10% | Temperature: 852, Time: 1000 hours, Apply rated current. Measurement at 244 hours after test conclusion. |
2410121250_microgate-MPIE201610-1R0M-LF_C696462.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
