<
>
Specifications
Current - Saturation (Isat):
2.2A
Mfr. Part #:
MPIT6045-470M-LF
Package:
SMD,6x6mm
Key Attributes
Model Number:
MPIT6045-470M-LF
Product Description
Product Overview
The MPIT6045 series is a range of SMD power inductors designed for various electronic applications. These inductors offer reliable performance and are manufactured by Shenzhen Microgate Technology Co., Ltd.
Product Attributes
- Brand: Microgate
- Origin: Shenzhen, P.R.C.
- Material: Ni-Zn Ferrite core, Enameled Copper Wire, Ag/Ni/Sn/Cu terminals, Epoxy resin and magnetic powder glue.
- Certifications: Lead-free products (LF)
Technical Specifications
| Microgate Part No. | Inductance (uH) | DCR () Max. | DCR () Typ. | Isat (A) Max. | Isat (A) Typ. | Irms (A) Max. | Irms (A) Typ. |
| MPIT6045-R82M-LF | 0.8220% | 0.011 | 0.008 | 13.00 | 15.00 | 5.75 | 6.35 |
| MPIT6045-1R0M-LF | 1.0020% | 0.010 | 0.008 | 13.00 | 15.00 | 5.75 | 6.35 |
| MPIT6045-1R2M-LF | 1.2020% | 0.013 | 0.010 | 11.00 | 12.50 | 5.50 | 6.05 |
| MPIT6045-1R5M-LF | 1.5020% | 0.013 | 0.010 | 10.00 | 11.50 | 5.50 | 6.05 |
| MPIT6045-1R8M-LF | 1.8020% | 0.016 | 0.012 | 9.50 | 10.50 | 4.85 | 5.60 |
| MPIT6045-2R2M-LF | 2.2020% | 0.018 | 0.014 | 9.00 | 10.50 | 4.60 | 5.00 |
| MPIT6045-3R0M-LF | 3.0020% | 0.024 | 0.018 | 8.00 | 9.00 | 4.00 | 4.40 |
| MPIT6045-3R3M-LF | 3.3020% | 0.024 | 0.018 | 8.00 | 9.00 | 4.00 | 4.40 |
| MPIT6045-3R9M-LF | 3.9020% | 0.025 | 0.021 | 6.20 | 6.80 | 3.90 | 4.30 |
| MPIT6045-4R7M-LF | 4.7020% | 0.026 | 0.020 | 6.00 | 7.50 | 3.80 | 4.20 |
| MPIT6045-6R8M-LF | 6.8020% | 0.040 | 0.031 | 5.50 | 6.20 | 3.00 | 3.30 |
| MPIT6045-8R2M-LF | 8.2020% | 0.045 | 0.038 | 4.50 | 5.00 | 2.85 | 3.15 |
| MPIT6045-100M-LF | 10.020% | 0.056 | 0.046 | 4.20 | 4.80 | 2.75 | 3.00 |
| MPIT6045-120M-LF | 12.020% | 0.065 | 0.050 | 4.00 | 4.50 | 2.50 | 2.75 |
| MPIT6045-150M-LF | 15.020% | 0.085 | 0.065 | 3.50 | 3.80 | 2.10 | 2.30 |
| MPIT6045-220M-LF | 22.020% | 0.116 | 0.089 | 3.20 | 3.50 | 1.80 | 2.00 |
| MPIT6045-330M-LF | 33.020% | 0.175 | 0.135 | 2.40 | 2.60 | 1.45 | 1.60 |
| MPIT6045-470M-LF | 47.020% | 0.260 | 0.200 | 2.20 | 2.30 | 1.20 | 1.30 |
| MPIT6045-560M-LF | 56.020% | 0.286 | 0.220 | 1.70 | 1.90 | 1.15 | 1.25 |
| MPIT6045-680M-LF | 68.020% | 0.325 | 0.250 | 1.65 | 1.80 | 1.10 | 1.20 |
| MPIT6045-820M-LF | 82.020% | 0.408 | 0.340 | 1.40 | 1.50 | 1.05 | 1.15 |
| MPIT6045-101M-LF | 10020% | 0.468 | 0.390 | 1.30 | 1.40 | 1.00 | 1.10 |
| MPIT6045-121M-LF | 12020% | 0.585 | 0.450 | 1.10 | 1.20 | 0.90 | 1.02 |
| MPIT6045-151M-LF | 15020% | 0.740 | 0.570 | 0.95 | 1.15 | 0.80 | 0.91 |
| MPIT6045-221M-LF | 22020% | 1.050 | 0.880 | 0.70 | 1.00 | 0.50 | 0.60 |
| MPIT6045-331M-LF | 33020% | 1.464 | 1.220 | 0.70 | 0.77 | 0.58 | 0.64 |
| MPIT6045-471M-LF | 47020% | 2.300 | 1.770 | 0.53 | 0.60 | 0.45 | 0.50 |
| MPIT6045-102M-LF | 100020% | 5.650 | 4.700 | 0.40 | 0.45 | 0.30 | 0.35 |
| Item | Required Characteristics | Test Method/Condition |
| High temperature storage test | 1. No case deformation or change in appearance. 2. Inductance change 10% (|L|/L10%) | Temperature: 1252 Time: 1000 hours Measurement at 244 hours after test conclusion. |
| Low temperature storage test | Inductance change 10% (|L|/L10%) | Temperature: -402 Time: 1000 hours Measurement at 244 hours after test conclusion. |
| Humidity test | Inductance change 10% (|L|/L10%) | Temperature: 25-85, Humidity: 85% RH Time: 1000 hours Measurement at 244 hours after test conclusion. |
| Thermal shock test | Inductance change 10% (|L|/L10%) | -40 for 30 min. to 125 for 30 min. as 1 cycle. Go through 1000 cycles. |
| Solderability test | Terminal area must have 90% min. solder coverage. | Dip pads in flux then dip in solder pot at 2455 for 50.1 second. Solder: Sn96.5%Ag3%Cu0.5% |
| Heat endurance of reflow soldering | 1. No case deformation or change in appearance. 2. Inductance change 10% (|L|/L10%) | Refer to reflow curve, 3 times. Peak temperature: 260+5/-0. |
| Vibration test | No case deformation or change in appearance. | Amplitude: 10~55Hz, 1.5mm, 2 hours in each of 3 mutually perpendicular directions (total 6 hours). |
| Drop test | No case deformation or change in appearance. | Drop 10 times on a concrete floor from a height of 1m. |
| Terminal strength push test | Terminal should not pull off. | Pulling test: 17.64N force, Keep time 10s. Bending test: Deflection 2mm, Speed: 0.5mm/sec, Keep time: 601s. |
| Loading at High Temperature | 1. No case deformation or change in appearance. 2. Inductance change 10% (|L|/L10%) | Temperature: 852 Time: 1000 hours Apply rated current. Measurement at 244 hours after test conclusion. |
2410121250_microgate-MPIT6045-470M-LF_C696491.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
