Product Overview

The AMGRC2012 series of Common Mode Choke Coils are designed for automotive electronics applications. These coils provide effective noise suppression and are built to meet stringent AEC-Q200 reliability standards. They offer reliable performance across a wide operating temperature range and are suitable for various general electronic equipment, excluding mission-critical systems.

Product Attributes

• Brand: SHENZHEN MICROGATE TECHNOLOGY CO.,LTD
• Product Name: Winding Wire Common Mode Choke Coil
• Series: AMGRC2012
• Certifications: ROHS COMPLIANT, AEC-Q200
• Origin: Shenzhen, China
• Material Code: M (Refer to Product Identification for details)
• Lead Free: Yes

Technical Specifications

Product Identification

AMGRC 2012 M 900 T - 2 - LF

• Series name: Automotive electronics products
• Dimensions: LW: 2012 = 2.0 1.2 mm
• Material code: M
• Impedance: 900 = 90 10^0 = 90
• Packing Style: T: Taping
• Number of signal lines: 2
• Lead Free: LF

Dimensions

• A: 2.0 0.2 mm
• B: 1.2 0.2 mm
• C: 1.2 0.2 mm

Testing Conditions

• Ordinary Conditions: Temperature: 5 to 35, Humidity: 25 to 85% (RH)
• Doubt Conditions: Temperature: 202, Humidity: 60 to 75% (RH), Atmospheric Pressure: 86 to 106 kPa

Packaging

• Taping Style: T (Taping)
• Reel Diameter: 180 mm
• Packing Quantity (T type): 2000pcs/reel

Warning and Attentions

• Handle with static control bands.
• Ensure proper grounding of all equipment.
• Use non-magnetic tweezers.
• Avoid excessive mechanical shocks.
• Do not exceed rated current.
• Keep away from strong magnetic fields.
• Consider heat dissipation when mounting.
• Avoid flux residue after cleaning.
• Do not touch electrodes with bare hands to prevent solderability deterioration.
• When designing PCBs, ensure products are not subjected to mechanical stress from board warp or deflection.

Cleaning Conditions

• Cleaning Temperature: Max 60 (Max 40 for fluoride and alcohol type cleaner)
• Ultrasonic Cleaning: Power: 20W/l Max, Frequency: 28 KHz to 40 KHz, Time: 5 minutes Max
• Recommended Cleaners: Isopropyl alcohol (IPA), HCFC-225, Aqueous agents (Surface Active Agent Type, Hydrocarbon Type, Higher Alcohol Type, Alkali saponifier Type)
• Ensure no residual flux or cleaner after cleaning.
• Dry completely after rinsing with de-ionized water.
• Take care of the winding part during cleaning.

Circuit Design Considerations

Products are intended for use in general electronic equipment (office supply equipment, telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems) where product failure might result in loss of life, injury, or damage. For such uses, contact the sales department in advance.