<
>
Specifications
Insulation Resistance(IR):
10MΩ
Operating Temperature:
-40℃~+125℃
DC Resistance(DCR):
27mΩ
Voltage Rating - DC:
50V
Number of Lines:
2
Mfr. Part #:
ACW5020-501T40
Package:
SMD-4P,5x4.8mm
Key Attributes
Model Number:
ACW5020-501T40
Product Description
Product Overview
The ACW- Wire Wound Type Common Mode Filter is designed for noise suppression. It offers reliable performance with various impedance and current ratings, suitable for a wide range of electronic applications.
Product Attributes
- Brand: Meled
- Product Type: ACW- Wire Wound Type Common Mode Filter
- Series: ACW5020-SERIES
- File No.: SP-20103001
Technical Specifications
| Meled P/N | Common mode Impedance () | Test Frequency | Rated Voltage (V) | MAX DCR (m) | MAX Rated Current (A) | Max. IR M MIN |
| ACW5020-101T60 | 100 (Typ) | 100MHz/0.5V | 50 | 13 | 6.0 | 10 |
| ACW5020-251T50 | 250 (Typ) | 100MHz/0.5V | 50 | 20 | 5.0 | 10 |
| ACW5020-421T40 | 420 (Typ) | 100MHz/0.5V | 50 | 27 | 4.0 | 10 |
| ACW5020-501T40 | 500 (Typ) | 100MHz/0.5V | 50 | 27 | 4.0 | 10 |
| ACW5020-102T20 | 1000 (Typ) | 100MHz/0.5V | 50 | 34 | 2.0 | 10 |
| ACW5020-142T15 | 1400 (Typ) | 100MHz/0.5V | 50 | 56 | 1.5 | 10 |
| ACW5020-152T15 | 1500 (Typ) | 100MHz/0.5V | 50 | 56 | 1.5 | 10 |
Dimensions (UNIT: mm)
| A | B | C | D | E | F | G | H | I | |
| Value | 4.8 0.2 | 5.0 0.2 | 2.5 Max | 0.8 Typ | 1.0 Typ | 2.3 Ref | 1.6 Ref | 0.8 Ref | 1.0 Ref |
Material List
| NO. | ITEM | DESCRIPTION | SUPPLIER |
| 1 | CORE | FERRITE | FENGYIN OR EQ |
| 2 | WIRE | P180 Grd1 43*2*16.5 | ELEKTRISOLA OR EQ |
| 3 | ADHESIVE | EPOXY RESIN | NAGASE OR EQ |
| 4 | SOLDER | Sn99.3:Cu0.7 | SHENMAO OR EQ |
Taping Specifications
| Reel DimensionsUnit: mm) | Quantity | |||
| A | B | C | D | Pcs/Reel |
| 330 | 100 | 13 | 12.5 | 2500 |
Reliability Testing
| Test | Condition |
| Operating Temperature | - 40 to +125 ( Contain Heating coil ) |
| Appearance Inspection | No external defects by visual inspection |
| Terminal Strength | After soldering , between copper plaet and terminals of coils , push in two directions of X , Y with standing 10N(1.02kg) for10+/-2 sec. Terminal should not peel off. ( Refer to figure at right ) |
| Heat endurance of reflow | Refer to figure soldering |
| Insulating resistance | Over 100 M at 100V D.C . between wire and core |
| Dielectric Strength | Apply at 0.5KV 3mA for 1 minute between wire and core |
| Temperature characteristics | Inductance coefficient ( 0~2,000 ) 10 / ( - 40~ + 125 ) |
| Humidity characteristics | Inductance deviation within 10% , after 96 hours in 90~95% relative humidity at 40 2 and 1 hours drying under normal condition |
IR Reflow Profile
Temperature:
Preheating: 150 to 200 , 1 to 4 min
Soldering: 255 , 10sec more than 2 min
Natural cooling
2410121822_MetalLions-ACW5020-501T40_C2885946.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
