<
>
Specifications
Inductance @ Frequency:
6uH@100kHz
Insulation Resistance(IR):
10MΩ
Operating Temperature:
-40℃~+125℃
DC Resistance(DCR):
200mΩ
Voltage Rating - DC:
50V
Number of Lines:
2
Mfr. Part #:
ACW5040-302T05
Package:
SMD
Key Attributes
Model Number:
ACW5040-302T05
Product Description
Product Overview
The Meled ACW5040-SERIES is a Wire Wound Type Common Mode Filter designed for noise suppression. It offers effective filtering for various electronic applications.
Product Attributes
- Brand: Meled
- Website: www.metal-lions.com
Technical Specifications
| Meled P/N | Common mode Impedance @100MHz () | Inductance (uH) @100KHz/0.1V | Rated Voltage (V) | MAX DCR () | MAX Rated Current (A) | Max. IR (M) MIN |
| ACW5040-191T50 | 190 (Typ) | 0.6(Typ) | 50 | 0.02 | 5.0 | 10 |
| ACW5040-351T20 | 350 (Typ) | 1.1(Typ) | 50 | 0.04 | 2.0 | 10 |
| ACW5040-102T15 | 1000 (Typ) | 2.7(Typ) | 50 | 0.06 | 1.5 | 10 |
| ACW5040-152T10 | 1500 (Typ) | 3.6(Typ) | 50 | 0.10 | 1.0 | 10 |
| ACW5040-302T05 | 3000 (Typ) | 6.0(Typ) | 50 | 0.20 | 0.5 | 10 |
| ACW5040-402T02 | 4000 (Typ) | 8.0(Typ) | 50 | 0.30 | 0.2 | 10 |
Material List
| NO. | ITEM | DESCRIPTION | SUPPLIER |
| 1 | CORE | FERRITE | FENGYIN OR EQ |
| 2 | WIRE | P180 Grd1 43*2*16.5 | ELEKTRISOLA OR EQ |
| 3 | ADHESIVE | EPOXY RESIN | NAGASE OR EQ |
| 4 | SOLDER | Sn99.3:Cu0.7 | SHENMAO OR EQ |
| 5 | INK | BLACK | BON MARQUE OR EQ |
Taping Specifications
| Reel DimensionsUnit: mm) | Quantity |
| A: 330, B: 100, C: 13, D: 16.5 | Pcs/Reel: 1000 |
Reliability Testing
| ITEM | DESCRIPTION |
| Operating Temperature | - 40 to +125 ( Contain Heating coil ) |
| Appearance Inspection | No external defects by visual inspection |
| Terminal Strength | After soldering , between copper plaet and terminals of coils , push in two directions of X , Y with standing 10N(1.02kg) for10+/-2 sec. Terminal should not peel off. ( Refer to figure at right ) |
| Heat endurance of reflow | Refer to figure soldering |
| Insulating resistance | Over 100 M at 100V D.C . between wire and core |
| Dielectric Strength | Apply at 0.5KV 3mA for 1 minute between wire and core |
| Temperature characteristics | Inductance coefficient ( 0~2,000 ) 10 / ( - 40~ + 125 ) |
| Humidity characteristics | Inductance deviation within 10% , after 96 hours in 90~95% relative humidity at 40 2 and 1 hours drying under normal condition A test is made under the above mentioned condition , and it is kept for 2 hours in the normal |
| IR Reflow profile | Preheating: 1 to 4 min ( 50-150 ) Soldering: 10sec more than 2 min ( 255 ) Natural cooling |
2410121727_MetalLions-ACW5040-302T05_C2885954.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
