<
>
Specifications
Inductance @ Frequency:
2.7uH@100kHz
Insulation Resistance(IR):
10MΩ
Operating Temperature:
-40℃~+125℃
DC Resistance(DCR):
60mΩ
Voltage Rating - DC:
50V
Number of Lines:
2
Mfr. Part #:
ACW5040-102T15
Package:
SMD-4P,5x4.8mm
Key Attributes
Model Number:
ACW5040-102T15
Product Description
Product Overview
The Meled ACW5040-SERIES is a wire wound type common mode filter designed for noise suppression. It offers effective filtering with various impedance and inductance options to suit different application needs. This product is suitable for electronic circuits requiring EMI reduction.
Product Attributes
- Brand: Meled
- Origin: Not specified
- Certifications: Not specified
Technical Specifications
| Meled P/N | Common mode Impedance @100MHz () | Inductance (uH) @100KHz/0.1V | Rated Voltage (V) | MAX DCR () | MAX Rated Current (A) | Max. IR (M) MIN |
| ACW5040-191T50 | 190 (Typ) | 0.6(Typ) | 50 | 0.02 | 5.0 | 10 |
| ACW5040-351T20 | 350 (Typ) | 1.1(Typ) | 50 | 0.04 | 2.0 | 10 |
| ACW5040-102T15 | 1000 (Typ) | 2.7(Typ) | 50 | 0.06 | 1.5 | 10 |
| ACW5040-152T10 | 1500 (Typ) | 3.6(Typ) | 50 | 0.10 | 1.0 | 10 |
| ACW5040-302T05 | 3000 (Typ) | 6.0(Typ) | 50 | 0.20 | 0.5 | 10 |
| ACW5040-402T02 | 4000 (Typ) | 8.0(Typ) | 50 | 0.30 | 0.2 | 10 |
Electrical Characteristics
| Item | Description |
| IDC | T=40Typ. |
| I.R | 50V(DC)/0.5S |
| Insulating resistance | Over 100 M at 100V D.C . between wire and core |
| Dielectric Strength | Apply at 0.5KV 3mA for 1 minute between wire and core |
| Temperature characteristics | Inductance coefficient ( 0~2,000 ) 10 / ( - 40~ + 125 ) |
| Humidity characteristics | Inductance deviation within 10% , after 96 hours in 90~95% relative humidity at 40 2 and 1 hours drying under normal condition |
Dimensions
| Letter | Dimension (UNIT:mm) |
| A | 4.8 0.2 |
| B | 5.0 0.2 |
| C | 4.5 Max |
| D | 0.8 Typ |
| E | 1.0 Typ |
| F | 2.3 Ref |
| G | 1.6 Ref |
| H | 0.8 Ref |
| I | 1.0 Ref |
Material List
| NO. | ITEM | DESCRIPTION | SUPPLIER |
| 1 | CORE | FERRITE | FENGYIN OR EQ |
| 2 | WIRE | P180 Grd1 43*2*16.5 | ELEKTRISOLA OR EQ |
| 3 | ADHESIVE | EPOXY RESIN | NAGASE OR EQ |
| 4 | SOLDER | Sn99.3:Cu0.7 | SHENMAO OR EQ |
| 5 | INK | BLACK | BON MARQUE OR EQ |
Taping Specifications
| Reel DimensionsUnit: mm) | Quantity | |||
| A | B | C | D | Pcs/Reel |
| 330 | 100 | 13 | 16.5 | 1000 |
Reliability Testing
| Item | Description |
| Operating Temperature | - 40 to +125 ( Contain Heating coil ) |
| Appearance Inspection | No external defects by visual inspection |
| Terminal Strength | After soldering , between copper plaet and terminals of coils , push in two directions of X , Y with standing 10N(1.02kg) for10+/-2 sec. Terminal should not peel off. ( Refer to figure at right ) |
| Heat endurance of reflow | Refer to figure soldering |
| Insulating resistance | Over 100 M at 100V D.C . between wire and core |
| Dielectric Strength | Apply at 0.5KV 3mA for 1 minute between wire and core |
| Temperature characteristics | Inductance coefficient ( 0~2,000 ) 10 / ( - 40~ + 125 ) |
| Humidity characteristics | Inductance deviation within 10% , after 96 hours in 90~95% relative humidity at 40 2 and 1 hours drying under normal condition |
IR Reflow profile
| Temperature | Time | |
| Preheating | 150 to 200 | 1 to 4 min |
| Soldering | 255 | 10sec more than 2 min |
| Natural cooling |
2410121727_MetalLions-ACW5040-102T15_C2885952.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
